ANYFAR D25 Series

Contents

ANYFAR Wireless CarPlay Moto Android Auto 5.0 inch Portable Digital GPS Moto Navigation Motorcycle Dashboard Display Screen TPMS User Manual

Model: D25 Series | Brand: ANYFAR

1. Introduction

Thank you for choosing the ANYFAR Wireless CarPlay Moto Android Auto 5.0 inch Portable Digital GPS Moto Navigation Motorcycle Dashboard Display Screen. This device is designed to enhance your riding experience with seamless connectivity, navigation, and multimedia features. It offers a robust, waterproof design suitable for various weather conditions and is compatible with a wide range of motorcycles, electric bikes, and ATVs.

Key features include:

  • Wireless CarPlay & Android Auto for hands-free navigation, music, and calls.
  • 5-inch HD screen with enhanced display quality and reduced bezels.
  • IP67 waterproof and dustproof rating for all-weather use.
  • Fast boot-up time, ready to navigate in approximately 3 seconds.
  • Audio and video separation for easy connection to Bluetooth headsets or motorcycle speakers.
  • Optional Tire Pressure Monitoring System (TPMS) and driving recorder for added safety and functionality.

2. Safety Information

Please read and understand all safety instructions before installation and use to prevent injury or damage to the device.

  • Power Connection:
    • The smart screen's red power wire (ACC+12V) MUST be connected to your motorcycle's ACC+12V. Do NOT connect it to the battery's constant power (B+), as this will prevent the screen from turning off with the ignition.
    • The smart screen's black negative wire MUST be connected to the negative terminal of your motorcycle's battery.
    • Connecting the red power wire to a power supply greater than 12V will damage the smart screen.
  • Water Exposure:
    • While the device is IP67 waterproof, do not use a high-pressure water gun to rinse the screen, camera, or tire pressure monitor, as this may compromise the seals.
  • Accessory Compatibility:
    • The smart screen is designed to connect only with DVR and TPMS monitors produced by ANYFAR. Using incompatible accessories may lead to malfunction.

3. Package Contents

Please check the box for the following items:

Image showing the contents of the product package: the main display unit, power cable, handlebar mounting bracket, and small tools.
Figure 3.1: Package Contents (Main unit, power cable, handlebar mount, tools)
  • ANYFAR 5-inch Smart Screen Display
  • Power Cable (with fuse)
  • Handlebar Mounting Bracket
  • Installation Tools (Allen key, screwdriver)
  • User Manual (PDF available online: View PDF)
  • (Optional) TPMS Sensors (if purchased)
  • (Optional) Driving Recorder (if purchased)

4. Setup

4.1. Wiring Installation

Proper wiring is crucial for the device's functionality and your safety. Refer to the diagram below:

Wiring diagram showing connections for the motorcycle CarPlay screen. The red power wire connects to the motorcycle's ACC power supply (positive terminal) via a fuse. The black ground wire connects to the motorcycle battery's negative terminal. A waterproof detachable cable connector connects the power cable to the CarPlay screen.
Figure 4.1: Installation Wiring Diagram
  1. Locate your motorcycle's ACC+12V power supply. This is a power source that turns on and off with your motorcycle's ignition.
  2. Connect the Red wire (ACC+12V) from the smart screen's power cable to the motorcycle's ACC+12V power supply. Ensure the fuse is properly installed in the red wire.
  3. Connect the Black wire from the smart screen's power cable to the negative terminal of your motorcycle's battery.
  4. Connect the waterproof detachable cable connector from the power cable to the corresponding port on the motorcycle CarPlay screen.

4.2. Bracket Installation

The device comes with a handlebar mounting bracket suitable for various motorcycle models.

  1. Twist the ball head component firmly onto the back clip of the mounting bracket.
  2. Utilize the variable diameter handle set to secure the bracket to your motorcycle's handlebars. This set supports handlebars with diameters between 12-28 cm.
  3. Install the smart screen display onto the bracket.
  4. Adjust the screen to your desired viewing angle and position, then tighten all screws to ensure a secure installation.

4.3. TPMS Installation (Optional)

If you have purchased the optional TPMS sensors, follow these steps for installation and pairing:

Diagram showing the installation of a TPMS sensor onto a motorcycle wheel valve, with an arrow indicating the clockwise tightening direction.
Figure 4.2: TPMS Sensor Installation
  1. On the smart screen, navigate to the TPMS settings.
  2. Set your preferred tire pressure unit (Bar or Psi).
  3. Set the air pressure alarm values according to your motorcycle's specifications. The system will provide a red warning if tire pressure falls outside these set values.
  4. Initiate the tire pressure pairing process. Sensor 'A' corresponds to the front wheel (FRO), and sensor 'B' corresponds to the rear wheel (BAC).
  5. Install sensor 'A' onto the front wheel's valve stem and activate it.
  6. Install sensor 'B' onto the rear wheel's valve stem and activate it.

Note: If tire pressure values are not displayed after installation, please re-pair the sensors. If you need to replace a sensor, unpair the old sensor first, then pair the new one.

5. Operating Instructions

5.1. Wireless CarPlay & Android Auto Connection

The device automatically connects to your smartphone for CarPlay or Android Auto, providing a seamless, cable-free experience.

Image illustrating wireless CarPlay and Android Auto connectivity, showing a smartphone mirroring its display onto the motorcycle smart screen for navigation, music, and calls.
Figure 5.1: Wireless CarPlay & Android Auto in action
  1. Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
  2. On the smart screen, select either 'CarPlay' or 'Android Auto'.
  3. Follow the on-screen prompts to pair your smartphone with the smart screen via Bluetooth.
  4. Once paired, CarPlay or Android Auto will launch automatically, mirroring your phone's interface for navigation, music, and communication.

5.2. Bluetooth Audio Output

Audio from Wireless CarPlay and Android Auto is transmitted to your helmet or Bluetooth headsets for a safer and more enjoyable experience.

Image showing a motorcycle rider with a helmet, and a smartphone connected via Bluetooth to the smart screen, indicating audio output to Bluetooth headphones or helmet.
Figure 5.2: Safety Audio Output via Bluetooth
  1. Bluetooth earphones and helmets can only be connected to your mobile phone for use, and cannot be connected directly to the smart screen.
  2. Before or after successfully enabling CarPlay or Android Auto through your phone with the screen's Bluetooth, ensure your phone is connected to your Bluetooth earphones or helmet. This will allow you to hear audio from your phone through your Bluetooth device.

5.3. Online Navigation

Utilize the latest maps for routing, discovering new paths, and enjoying your ride.

Image of the smart screen displaying an online navigation map, showing routes and points of interest.
Figure 5.3: Online Navigation Interface

Once CarPlay or Android Auto is active, open your preferred navigation app (e.g., Google Maps, Apple Maps, Waze) on the smart screen. The display will show real-time directions and traffic information.

5.4. Online Music

Access your favorite music, podcasts, and audiobooks directly from the smart screen.

Image showing the smart screen displaying various music and media applications, indicating support for online music playback.
Figure 5.4: Online Music Playback

Through CarPlay or Android Auto, you can access music streaming services and media players installed on your smartphone. Control playback directly from the smart screen.

5.5. Driving Recorder Operation (Optional)

If you have the optional driving recorder, you can view and manage recordings via your mobile phone.

  1. On the smart screen, navigate to 'CarPlay' and then select 'WiFi Video'.
  2. Scan the QR code displayed on the screen to download the dedicated mobile application.
  3. On your mobile phone, enable Wi-Fi and connect to the smart screen's Wi-Fi network. The default password is 12345678.
  4. Once connected, your mobile phone will display the recorder screen, allowing you to view live footage or playback recorded videos.

Note: Android phones can download videos directly to local storage. Apple phones can only download videos to iCloud.

6. Maintenance

To ensure the longevity and optimal performance of your ANYFAR smart screen, follow these maintenance guidelines:

  • Cleaning: Use a soft, damp cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
  • Waterproofing: The device has an IP67 waterproof rating, meaning it is fully dustproof and can withstand rain and splashes. However, avoid submerging it for extended periods or exposing it to high-pressure water jets.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Inspection: Periodically check all cables and connectors for any signs of wear or damage. Ensure waterproof connectors are securely fastened.
Image showing the smart screen being splashed with water, highlighting its IP67 waterproof feature.
Figure 6.1: IP67 Waterproof Feature

7. Troubleshooting

If you encounter issues with your smart screen, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Screen does not turn off with ignition.Red power wire connected to constant battery power (B+).Reconnect the red power wire to the motorcycle's ACC+12V power supply.
Screen does not power on.Incorrect power connection, blown fuse, or power supply issue.Check power wiring (Red to ACC+12V, Black to negative). Inspect the fuse in the red power wire and replace if blown. Ensure the motorcycle's power supply is functioning.
No audio from helmet/headset.Bluetooth headset not connected to phone, or phone not connected to screen.Ensure your phone is paired with the smart screen via Bluetooth for CarPlay/Android Auto, and then ensure your phone is also paired with your Bluetooth helmet/headset. The smart screen does not directly connect to audio devices.
TPMS values not displayed.Sensors not paired or signal interference.Re-pair the TPMS sensors according to the instructions in Section 4.3. Ensure sensors are correctly installed and activated.
Cannot view driving recorder footage on phone.Phone not connected to screen's Wi-Fi, or incorrect Wi-Fi password.Ensure your phone's Wi-Fi is enabled and connected to the smart screen's Wi-Fi network (password: 12345678). Confirm the correct app is installed.

8. Specifications

FeatureSpecification
Screen Size5 inch
Resolution854*480
Waterproof LevelIP67
MaterialPlastic
ConnectivityWireless CarPlay, Android Auto, Bluetooth, Wi-Fi
OriginMainland China

9. User Tips

  • For stable power, always connect the device to your motorcycle's ACC+12V power supply rather than a USB power source, which can be unstable.
  • To avoid damage, never use a high-pressure water gun directly on the screen, camera, or TPMS sensors.
  • Remember that Bluetooth audio devices (helmets, earphones) connect to your phone, not directly to the smart screen. Ensure your phone is connected to both the smart screen and your audio device for sound.

10. Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download: View User Manual (PDF).

© 2024 ANYFAR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.