JOYING 10.4 Inch Android Car Stereo Multimedia Player

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JOYING 10.4 Inch Android Car Stereo Multimedia Player, specifically designed for Honda CRV models from 2012 to 2016. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Image: The JOYING 10.4 Inch Android Car Stereo featuring Snapdragon 6490, 12GB RAM, 256GB storage, and a 2K QLED display, integrated into a Honda CRV dashboard.

2. Package Contents

Please verify that all items listed below are included in your package:

Image: Visual representation of the package contents.

• 10.4" Head Unit
• Single Din Cage
• Power cable (may vary depending on purchase option)
• Screen Ribbon Cable *1
• BT Antenna *1
• WiFi Antenna *2
• 4G Antenna *2
• USB Cable *2
• GPS Antenna *1
• External Mic *1
• AR Cable *1
• User Manual

3. Vehicle Compatibility and Installation Notes

To ensure plug-and-play compatibility and receive the appropriate wiring harness, please identify your Honda CRV's dashboard type (2012-2016 models) from the options below:

Image: Guide to confirm your car dashboard type (A: without screen, B: with screen, C: with screen, D: with DA screen).

3.1 General Installation Notes

• Not all connectors on the vehicle's original plugs need to be connected. Only connect the plugs suitable for your specific vehicle.
• After installation, power on the device to check for proper functioning. If any function is not working correctly, consult the troubleshooting section or contact support.
• This device does not support synchronizing the original car's IMID screen information by default after installation.

3.2 Steering Wheel Control (SWC) Compatibility

Image: Steering wheel controls, highlighting specific buttons.

• Dashboard A, B, C: The three 'phone buttons' on the steering wheel will be non-functional. All other SWC buttons will operate normally.
• Dashboard D: All steering wheel buttons will be fully supported.

3.3 Camera and USB Support

• Factory Reverse Camera:
  • Dashboard A: The factory reverse camera will continue to display on the original IMID screen, not on the JOYING head unit. To display on the JOYING unit, you may need to rewire the original car's cable or install a JOYING AR camera (optional accessory).
  • Dashboard B, C, D: This device supports the factory reverse camera.
• Factory Right View Camera: Supported.
• Factory USB:
  • Dashboard A, B, C: Factory USB is not supported.
  • Dashboard D: Factory USB is supported.
• Factory HDMI Port: Dashboard D does not support the factory HDMI port.
• Factory Amplifier and Subwoofer: Supported.

4. Operation

4.1 Navigation, Entertainment, and Third-Party Apps

The head unit provides a unified interface for navigation, entertainment, and various third-party applications.

Image: The head unit displaying multiple applications and navigation simultaneously.

• Tap the '---' icon to switch to the app's interface.
• Long press on an app icon to switch between running applications.

4.2 Connectivity: Bluetooth, CarPlay, and Android Auto

The device supports dual-mode Bluetooth for simultaneous connections and seamless switching between devices. It also features wireless CarPlay and Android Auto for integrated smartphone functionality.

Image: Demonstrates dual-mode Bluetooth, Wireless CarPlay, and Wireless Android Auto capabilities.

• Bluetooth: Connect two smartphones simultaneously or link a phone with an OBD diagnostic dongle.
• Wireless CarPlay: Enjoy seamless integration with your iPhone for navigation, music, messages, and more.
• Wireless Android Auto: Connect your Android phone for access to Google Maps, music, and other apps.

4.3 Display Modes

The head unit offers flexible display options to suit your preferences and driving conditions.

Image: Comparison of Light Mode and Dark Mode on the head unit display.

• Light/Dark Mode: Switch between light and dark themes manually or set it to automatically adjust based on time of day or vehicle's headlights.

5. Key Features

5.1 Advanced Audio System

Experience superior sound quality with advanced audio components and customization options.

Image: DTS Sound Enjoyment, highlighting 4-channel, 5532 Op-Amp & TDA7850 Amplifier.

Image: Specifications for Velvet Sound AKM 7739 DSP (24-bit ADC & 32-bit DAC) and High-Fidelity Sound AKM 4432 DAC (192kHz PCM Input, 32-bit Processing & Low-Distortion), along with 4*Audio Outputs, Fiber Optical Output, SPDIF Coaxial Output, and High-resolution audio support.

Image: Detailed comparison of Bluetooth audio codecs (SBC, AAC, Qualcomm aptX HD) including resolution, bit rate, bandwidth, delay, and sound quality.

• DTS Sound Enjoyment: Features a 4-channel, 5532 Op-Amp & TDA7850 Amplifier for powerful and clear audio.
• Velvet Sound AKM 7739 DSP: 24-bit ADC & 32-bit DAC for precise sound processing.
• High-Fidelity Sound AKM 4432 DAC: 192kHz PCM Input, 32-bit Processing & Low-Distortion for exceptional audio reproduction.
• Sound Customization: 20 selectable sound effect styles and 48-band EQ for detailed audio tuning.
• Audio Outputs: Includes 4*Audio Outputs, Fiber Optical Output, and SPDIF Coaxial Output.
• Bluetooth Audio: Supports SBC, AAC, and Qualcomm aptX HD codecs for high-quality wireless audio (aptX HD compatible with Android phones only; iPhone defaults to AAC).

5.2 Rear Interfaces and External Connectivity

The head unit offers a comprehensive set of rear interfaces for various external connections.

Image: Detailed view of the Head Unit Rear Interfaces, showing ports for AVM360, AR, Radio-ANT, USB, HDMI IN, HDMI OUT, MIC, USB-OTG, Type-C, Coaxial, Optical, various Antennas (WiFi, BT, 4G, 5G, GPS), VIN, CEN, SUB, RIN, RR, RL, FL, FR, and Power.

• HDMI Input: Connect gaming consoles, media players, or other devices to use your head unit as a monitor.
• HDMI Output: Sync the infotainment screen's navigation and media to rear headrest screens for back-seat viewing.
• USB Type-C: Connect a portable screen to mirror the display and achieve dual-screen operation. (Note: HDMI cable and USB Type-C cable are not included).

5.3 Performance and Cooling

Designed for robust performance and efficient heat dissipation.

Image: Advanced Engineering High-Efficiency Cooling system with internal fans and heat sinks.

• High-Efficiency Cooling: Advanced engineering ensures optimal thermal management for sustained performance.

5.4 Multiband GNSS and Wireless Technologies

Integrated global positioning and advanced wireless capabilities.

Image: Multiband GNSS display, showing GPS signal strength and compass, supporting GPS L1 and L5 bands.

Image: Motherboard Feature Overview, detailing components like ARM QCM6490 processor, TDA7850 Amplifier, AKM 4432 Audio DAC, NXP TEF6686 Radio Tuner, and AKM 7739 Audio DSP.

• Multiband GNSS: Qualcomm Location Suite Engine supports GPS, GLONASS, NavIC, BeiDou, Galileo, and QZSS, including L1 and L5 bands for enhanced accuracy.
• Wi-Fi 6E: Supports 802.11ac, 802.11n, 802.11ax, 802.11g, 802.11b standards with 2.4 GHz, 5 GHz, and 6 GHz spectral bands. Features MU-MIMO (UL/DL) and Dual-Band Simultaneous (DBS).
• Dual Bluetooth: BT QCC Qualcomm aptX/aptX HD Audio and BTZ WCN6856 supporting dual-band simultaneous (DBS). Bluetooth 5.2 compliant.

6. Optional Accessories

The following accessories are NOT included in the standard package and must be purchased separately to enhance your driving experience.

6.1 AR Rear Camera

Image: AR Rear Camera, showing its function to switch to reverse display automatically when reversing the car.

Switch to the reverse display automatically when reversing the car, providing a clear view of the area behind your vehicle.

6.2 AR Front Camera

Image: AR Front Camera, showing its function to record the front road while driving.

Record the front road in the background automatically while driving, useful for evidence in case of incidents.

6.3 OBD2 Diagnostic Tool

Image: OBD2 dongle, connected via Bluetooth to retrieve real-time data and trouble codes from your vehicle computer.

Connects via Bluetooth to retrieve real-time data and trouble codes from your vehicle's computer, allowing you to monitor various parameters.

7. Specifications

8. Troubleshooting

If you encounter issues with your JOYING car stereo, please refer to the following common solutions:

• No Power: Ensure all power cables are securely connected. Check your vehicle's fuse box for any blown fuses related to the stereo system.
• No Sound: Verify speaker connections. Check audio settings on the head unit to ensure volume is not muted or too low. Confirm that the correct audio source is selected.
• Steering Wheel Controls Not Working (Models A, B, C): Remember that the three 'phone buttons' are non-functional on these dashboard types. If other buttons are not working, recheck wiring connections for SWC.
• Factory Reverse Camera Not Displaying (Dashboard A): As noted in the compatibility section, the factory camera displays on the IMID screen. Consider rewiring or installing a JOYING AR camera if you wish to see it on the head unit.
• GPS Signal Issues: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky. Check GPS settings on the device.
• Bluetooth Connectivity Problems: Ensure Bluetooth is enabled on both the head unit and your mobile device. Try unpairing and re-pairing the devices.
• CarPlay/Android Auto Not Connecting: Verify that your phone's operating system is up to date. Ensure the correct USB cable (if wired) or Wi-Fi connection (if wireless) is established.
• Screen Unresponsive: Try restarting the head unit. If the issue persists, a factory reset might be necessary (note: this will erase all user data).

For persistent issues, please contact JOYING customer support.

9. User Tips

• Regular Updates: Check for firmware updates periodically to ensure optimal performance and access to new features.
• App Management: Regularly close unused background applications to free up RAM and improve system responsiveness.
• Screen Care: Use a soft, lint-free cloth to clean the QLED screen. Avoid harsh chemicals that may damage the display.
• Backup Data: Periodically back up important data, such as navigation favorites or custom settings, if the device supports it.
• Personalize Sound: Utilize the 48-band EQ and sound effect styles to tailor the audio output to your personal preferences and vehicle acoustics.

10. Warranty and Support

10.1 Warranty Information

This JOYING car stereo comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

10.2 Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact JOYING customer support through the seller's official channels. Provide your model number (JY-HT146N12) and a detailed description of the issue to expedite support.