1. Product Overview
The Easythreed ETLR001 is a compact and lightweight mini laser engraver designed for personal and small business use. It features a 0.5W blue laser, APP wireless control via Bluetooth, and USB connectivity, offering an engraving area of 100x100mm.
2. Safety Precautions
- Always wear protective eyewear when operating the laser engraver.
- Do not look directly into the laser beam.
- Ensure proper ventilation in the work area.
- Keep flammable materials away from the engraving area.
- Do not engrave materials that produce toxic fumes.
- Keep out of reach of children and pets.
3. Setup Instructions
The Easythreed ETLR001 features a buckle structure design for easy assembly.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the package list are present.
- Assemble the Frame: Connect the main frame components using the buckle structure. Ensure all connections are secure.
- Install Laser Module: Attach the laser module to its designated slot on the frame. Ensure the wiring is correctly connected to the control board.
- Connect Power Adapter: Plug the 12V 1A power adapter into the engraver and then into a power outlet.
- Connect to Device: Choose your preferred connection method:
- Bluetooth (Mobile App): Download the 'Easythreed' app from your device's app store (iOS & Android). Enable Bluetooth on your mobile device and pair with the engraver.
- USB (Computer): Connect the engraver to your computer using the provided USB cable. Install any necessary drivers if prompted by your operating system.
4. Operating Instructions
4.1 Power On/Off
The engraver is controlled by a single button. Press the button to power ON or OFF the device. Two indicator lights represent different states:
- ON: Light Blue
- OFF: Light Yellow
4.2 Focusing the Laser
Before engraving, ensure the laser is properly focused for optimal results. Rotate the laser module to adjust the focus.
4.3 Preparing for Engraving
- Place Material: Position the material to be engraved within the 100x100mm engraving area. Ensure it is flat and secure.
- Load Design: Open the Easythreed app or computer software. Import your design file (JPG/PNG/BMP format).
- Adjust Settings: Set engraving parameters such as speed (up to 300mm/min) and laser power according to the material type.
- Preview (Optional): Use the preview function to ensure the design is correctly positioned on the material.
4.4 Starting Engraving
Once settings are confirmed, initiate the engraving process from the app or software. Monitor the engraving process and ensure safety precautions are followed.
5. Maintenance
- Cleaning: Regularly clean the engraving area and the laser lens to prevent dust and debris buildup, which can affect engraving quality. Use a soft, lint-free cloth.
- Laser Lens Care: Handle the laser lens with extreme care. Avoid touching it with bare hands. If cleaning is necessary, use a specialized lens cleaning solution and cloth.
- Storage: When not in use, store the engraver in a dry, dust-free environment.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Engraver does not power on | Power adapter not connected or faulty | Check power connections. Try a different power outlet. |
| Cannot connect via Bluetooth/USB | Bluetooth off, incorrect pairing, or missing drivers | Ensure Bluetooth is enabled. Re-pair the device. Install necessary USB drivers. Restart the engraver and device. |
| Poor engraving quality / Faint engraving | Laser out of focus, incorrect power/speed settings, or unsuitable material | Adjust laser focus. Refer to material guidelines for optimal power/speed settings. Ensure material is engravable. |
| Engraving stops mid-process | Loose connection, software error, or overheating | Check all connections. Restart the software and engraver. Allow the device to cool down if it feels hot. |
7. Specifications
| Feature | Specification |
|---|---|
| Model | ETLR001 |
| Engrave Area | 10x10cm (3.94x3.94inch) |
| Laser Power | 0.5W Blue Laser |
| Wave Length | 450NM |
| Power Adaptor | 12W, 12V 1A |
| Engraving Speed | Up to 300mm/min |
| Product Size | 203x185x132mm |
| Program/App | Easythreed (iOS & Android) |
| Support Format | NC |
| Connection | Bluetooth (BT) / USB |
| File Format | JPG/PNG/BMP |
| Engravable Materials | Paper, Wood, Bamboo, Leather, Rubber, Plastic, Acrylic |
| Non-Engravable Materials | Stone, Metal, Glass, Mirror |
| Package Size | 295x220x75mm (11.6x8.6x2.9in) |
| Package Weight | 1.05kg (37oz) |
| Origin | Mainland China |
| Certification | CE |
8. User Tips
- Check Engraving Quality: If you notice fuzzy or low-quality imprints, ensure the laser is properly focused and that the material is suitable for engraving. Experiment with different power and speed settings for new materials.
- Material Compatibility: Always double-check if your material is listed as engravable. Attempting to engrave non-compatible materials like metal or glass will not yield results and may damage the machine.
- App Interface: Familiarize yourself with the Easythreed app's interface. Its user-friendly design allows for quick adjustments and monitoring of engraving tasks.
9. Warranty and Support
For any technical support, warranty claims, or inquiries regarding your Easythreed ETLR001 Laser Engraver, please contact the seller or manufacturer directly. Keep your purchase records handy for faster service.
