1. Introduction
Thank you for choosing the NEWBOLER Bicycle Front Light. This manual provides essential information for the safe and effective use, installation, and maintenance of your new bicycle light. Please read this manual thoroughly before first use and keep it for future reference.
The NEWBOLER LIG003 is a high-lumen bicycle front light designed for enhanced visibility and safety during cycling. Featuring a robust aluminum alloy body, multiple lighting modes, and a powerful 14000mAh battery, it also doubles as a power bank for charging other devices.
2. Safety Information
- Always ensure the light is securely mounted before riding.
- Do not look directly into the light beam to avoid eye injury.
- Keep out of reach of children.
- Do not disassemble or modify the light. Unauthorized modifications may cause damage and void the warranty.
- Avoid prolonged exposure to extreme temperatures.
- While the light is waterproof for daily use (IP65/IPX-5), do not submerge it in water or expose it to heavy rain for extended periods.
- Use only the provided or recommended charging cable.
3. Package Contents
Please check the package for the following items:
- NEWBOLER Bicycle Front Light (LIG003, LIG610, or LIG008 model)
- Handlebar Mounting Bracket(s)
- USB-C Charging Cable
- User Manual
4. Product Overview
The NEWBOLER Bicycle Front Light features a durable aluminum alloy shell, multiple high-brightness P9 LED lamp beads, a digital display for battery and mode information, and a Type-C charging port.
5. Installation
Follow these steps to securely mount your NEWBOLER Bicycle Front Light to your handlebar:
- Step 1: Position the Base
Place the mounting base over your bicycle handlebar. If needed, use appropriate spacers to ensure a snug fit. - Step 2: Adjust and Tighten Base Screws
Adjust the position of the base to your desired angle and securely tighten the base screws. - Step 3: Install Brackets
Install the first two brackets onto the base in the same manner, ensuring they are firm. - Step 4: Attach the Light
Slide the bicycle light into place on the mounted base. Tighten the screws on the brackets to fix the light securely.
6. Operation
Power On/Off
Press and hold the power button (usually marked with a power symbol) to turn the light on or off.
Changing Light Modes (LIG003)
The LIG003 model features 4 lighting modes. Short press the light mode button to cycle through:
- Floodlight: Wide beam for general illumination.
- Spotlight: Focused beam for distant visibility.
- High Light: Combination of floodlight and spotlight for maximum brightness.
- Flash: Pulsating light for increased visibility to others.
Changing Light Modes (LIG610)
The LIG610 model features 5 lighting modes:
- Short press to cycle through: Near light - Far light - Far and near full light - Flicker.
- Long press to activate: Daytime running light.
Changing Light Modes (LIG008)
The LIG008 model features 4 lighting modes:
- Near light - High beam bright - Far and Near full light - Flashing.
Digital Display
The integrated digital display shows battery power (0-100) and the current light mode or remaining runtime, depending on the model.
7. Charging
Charging the Light
Connect the provided USB-C cable to the light's charging port and to a suitable USB power source (e.g., wall adapter, computer USB port). The digital display will indicate charging status. A full charge for the LIG003 model takes approximately 8 hours.
Power Bank Function (LIG003 & LIG008)
The LIG003 and LIG008 models can be used as a power bank to charge other USB-powered devices. Connect your device to the light's USB-C port using a compatible cable. The digital display will show the remaining battery percentage.
8. Maintenance
- Cleaning: Wipe the light's body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Resistance: The light is designed for daily life waterproofing (IP65 for LIG003, IPX-5 for LIG610/LIG008). Avoid soaking it in water or exposing it to heavy rain for prolonged periods to maintain its integrity.
- Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, charge the battery to about 50-70% every few months to prolong battery life.
- Battery Care: Avoid fully discharging the battery frequently. Charge it regularly to maintain optimal performance.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Low battery; Power button not pressed correctly; Internal fault. | Charge the light fully. Press and hold the power button for 3 seconds. If problem persists, contact support. |
| Light modes not changing | Light mode button not pressed correctly; Software glitch. | Short press the mode button firmly. Try turning the light off and on again. |
| Light not charging | Charging cable faulty; USB power source faulty; Charging port obstructed. | Try a different USB-C cable and power source. Check the charging port for debris. |
| Power bank function not working | Device not compatible; Cable faulty; Light battery too low. | Ensure your device is compatible. Try a different cable. Charge the bicycle light fully. |
| Mounting bracket loose | Screws not tightened sufficiently; Incorrect spacer used. | Re-tighten all mounting screws. Ensure correct spacers are used for your handlebar diameter. |
10. Specifications
| Feature | LIG003-14000mAh | LIG610-2000mAh | LIG008-4000mAh |
|---|---|---|---|
| Material | Aluminum Alloy | Aluminum Plastic Shell | Aluminum Plastic Shell |
| Lumens (Max) | 4500 LM | 2000 LM | 3000 LM |
| Battery Capacity | Approx. 14000mAh (26800*2) | Approx. 2000mAh | Approx. 4000mAh |
| Working Time | 9-13.5 hours | 2-3.5 hours | 2.5-4.5 hours |
| Charging Time | Approx. 8 hours | Approx. 3 hours | Approx. 4.5 hours |
| Charging Type | Type-C | Type-C | Type-C |
| Waterproof Level | IP65 | IPX-5 | IPX-5 |
| Power Bank Function | YES | NO | YES |
| Lamp Bead Type | P9 | N/A | N/A |
| Mounting Placement | Handlebar | ||
| Support Dimmer | 2-4 Files | ||
| Origin | Mainland China | ||
11. User Tips
- For optimal visibility, especially in urban areas, consider using the 'Flash' mode during the day to attract attention.
- When using the power bank function, monitor the light's battery level to ensure you have enough charge for your ride.
- Regularly check the mounting bracket for tightness, especially after riding on rough terrain, to prevent the light from shifting or falling.
- Clean the lens periodically with a soft cloth to maintain maximum light output.
12. Warranty and Support
NEWBOLER products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or the NEWBOLER customer service department. Keep your proof of purchase for warranty claims.