ECHTPower Wireless Game Controller User Manual

1. Introduction

This manual provides detailed instructions for setting up, operating, and maintaining your ECHTPower Wireless Game Controller (Model ES01GY). This versatile controller is designed for an enhanced gaming experience across multiple platforms, including Nintendo Switch, PC, iOS, and Android devices. It features Hall Effect joysticks for precision, customizable RGB lighting, programmable macro functions, and adjustable vibration.

2. Package Contents

• Wireless Controller x 1
• Charging Cable x 1
• Instruction Manual x 1

3. Product Overview

Familiarize yourself with the controller's layout and components.

3.1. Specification Diagram

• Left Joystick/L3: Left analog stick and L3 button.
• Left 3D Ring: LED ring around the left joystick.
• D-pad: Directional pad.
• Screen Capture Button: For taking screenshots.
• Home Button: Power on/off, wake up console.
• Turbo Button: Activates/deactivates turbo function.
• A/B/X/Y Buttons: Standard action buttons.
• Right 3D Ring: LED ring around the right joystick.
• M Button: For macro programming.
• Right Joystick/R3: Right analog stick and R3 button.
• Charging Indicator: Shows charging status.
• Pairing Button: For wireless pairing.
• R Button: Right shoulder button.
• L Button: Left shoulder button.
• ZR Button: Right trigger button.
• Type-C Charging Port: For charging the controller.
• ZL Button: Left trigger button.
• Channel LED: Indicates connection status and player number.
• ML Button: Left macro button on the back.
• MR Button: Right macro button on the back.
• Vibration Switch: Controls vibration function.
• Light Switch Key: Controls LED lighting.

4. Specifications

5. Setup and Connection

5.1. Initial Activation

Before initial use, the controller needs to be charged using the provided data cable to activate it.

5.2. Power On/Off

• Power On: Press the Home button lightly.
• Power Off: Press the pairing button lightly.

5.3. Connection Methods for Various Devices

Note for Switch Wired Connection: When connecting the Switch via cable, ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

6. Operating Instructions

6.1. TURBO Rapid Fire Function

Supported buttons: A/B/X/Y/L/R/ZL/ZR/D-pad

• Manual Turbo: Hold the T button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Automatic Turbo: Hold the T button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Disable Turbo: Hold the T button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Clear All: Press and hold the "TURBO" button for 3 seconds to clear rapid fire settings for all buttons.
• Speed Adjustment: Rapid fire speed can be adjusted to fast, medium, or slow. Default is slow. Hold the "TURBO" button on the controller and simultaneously operate the right joystick up or down to adjust the speed.

6.2. Macro Setting for Back Buttons (ML/MR)

Supported buttons: A/B/X/Y/L/R/ZL/ZR/L3/R3/D-PAD

• Entering Programming Mode: Press and hold the M button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: Press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press ML or MR. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming (mapping).
• Note: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the M button for 2 seconds and seeing the left and right 3D rings flash slowly, press ML or MR to clear the programmed back button settings.

6.3. Light Adjustment

• Light Key + R3: Switch between 3 modes (steady, breathing /running horse, rainbow).
• Light Key + L3: In steady mode: Switch colors. In breathing/running horse mode: No effect. In rainbow mode: Pause rainbow effect.
• '+' and Turbo Combo Key: Press both simultaneously for 3 seconds; the motor vibrates briefly, resetting the lights to default settings.
• Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold the lighting button again for 10 seconds to reactivate the joystick ring lighting.

6.4. Vibration Adjustment

• After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment. Four intensity levels are available: 100%, 70%, 30%, and 0%, with 70% set as default.
• Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function of both motors.

7. Maintenance

7.1. Charging

Connect the adapter using a USB data cable. The orange charging indicator will remain orange while charging. Once fully charged, the orange charging indicator will turn off.

7.2. Low Battery

When the battery is low, the light of the current channel will flash quickly as a reminder to charge the handle.

7.3. Standby Mode

• When the handle is powered on, short press the "Pairing" button to enter standby mode.
• When the handle is in pairing mode, it will automatically enter standby mode if pairing is unsuccessful after 60 seconds.
• When the handle is connected to the console, it will automatically enter standby mode after 15 minutes of inactivity.

8. Troubleshooting

8.1. Resetting the Controller

If the handle malfunctions, you can reset it by pressing and holding the "HOME" button for 10 seconds.

8.2. Joystick Drift Prevention and Solution

Joystick drift can occur due to incorrect operation during connection. To prevent drift, avoid touching the joysticks when powering on and connecting the controller wirelessly.

If joystick drift occurs, the problem can often be solved by simply reconnecting the joystick. Ensure no input is given to the joysticks during the reconnection process.

9. User Tips

• For optimal performance and to avoid potential drift issues, always ensure the joysticks are in their neutral position and not being touched when connecting the controller, especially during wireless pairing.
• The controller supports USB connection, providing a reliable wired option for platforms like PC and Switch.

10. Safety Precautions

• Do not expose the product to liquid.
• Do not disassemble the product.
• Avoid dropping the product.
• Avoid extremely high or low temperatures.

11. Compliance Information

11.1. Declaration of Conformity (Model: ES01)

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that ES01 radio equipment conforms to Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The product also conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that ES01 radio equipment conforms to Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

11.2. FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

FCC ID: 2A88F-ES01

The symbol indicates that the product should not be disposed of with household waste but should be brought to an appropriate collection point for recycling. Dispose of the product and rechargeable battery according to local regulations to help prevent negative impacts on the environment and human health.

12. Support and Contact Information

For any inquiries or support, please use the following contact details:

• Email: service@echtpower.com
• Web: www.echtpower.com
• Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
• Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen