NJTY L50P

Contents

NJTY L50P Laser Distance Meter

Electronic Angle Level & Digital Tape Measure

Model: L50P | Brand: NJTY

Introduction

The NJTY L50P is a versatile digital laser distance meter designed for precise distance and angle measurements. Featuring an aluminum alloy body, a built-in electronic angle sensor, and multiple measurement modes, it is an essential tool for professionals and DIY enthusiasts alike. This manual provides detailed instructions for safe and effective use of your device.

Package Contents

Please check the package carefully to ensure all items are present and in good condition:

  • 1x NJTY L50P Laser Distance Meter
  • 1x User Manual (this document, also available as PDF: User Manual PDF)
  • 1x Type-C Charging Cable
  • 1x Lanyard
Packing List: Laser Rangefinder, User Manual, Type-C charging cable, Lanyard
Image: Contents of the NJTY L50P package.

Specifications

Feature Specification
Model L50P
Measuring Range 0.05-50m
Measuring Accuracy ±3mm
Display Accuracy 1mm
Laser Power <1mW
Laser Class Class 2
Area/Volume Measurement Yes
Indirect Pythagorean Theorem Measurement Yes
Storage Function 50 groups
Continuous Measurement Maximum/Minimum
Operating Temperature Range 0℃~40℃
Electronic Level Yes
Measurement Reference Front /Rear
Storage Temperature Range -20℃~50℃
Charging Port Type Type-C
Power Supply 5V1A
Battery Type 110 (Built-in Lithium)
Battery Capacity 3.7V 250mAh
Laser Auto-off Time 30s
Device Auto-off Time 60s
Full-charge Measurement Life 1500 times
Product Dimensions 22.5x65x15mm (0.9x2.6x0.6 inches)
Product Weight 25g
Product dimensions of the NJTY L50P laser distance meter.
Image: Detailed product dimensions.

Setup

1. Charging the Device

The NJTY L50P comes with a built-in 230mAh lithium battery. Before first use, or when the battery indicator on the screen shows low power, charge the device using the provided Type-C USB cable.

  1. Connect the Type-C end of the charging cable to the charging port on the device.
  2. Connect the USB-A end of the cable to a 5V1A USB power adapter (not included) or a computer USB port.
  3. The battery indicator on the screen will show charging status.
  4. Once fully charged, disconnect the cable. A full charge provides approximately 1500 measurements.
NJTY L50P with Type-C charging cable connected, showing battery icon.
Image: Type-C charging port and battery indicator.

2. Powering On/Off

  • To Power On: Press and hold the 'MEAS/on' button. The screen backlight will illuminate.
  • To Power Off: Press and hold the 'MEAS/on' button again, or the device will automatically shut down after 60 seconds of inactivity. The laser will auto-off after 30 seconds of inactivity.

Operating Instructions

Button Function Description

  • MEAS/on: Power on/Measurement button/Continuous measurement.
  • FUNC: Function button (e.g., Area/Volume/Pythagorean/Unit switch).
  • U: Unit switch.
  • Trash Can Icon: Clear/Delete button.
  • Folder Icon: Historical data/Page through historical records.

1. Basic Distance Measurement

  1. Power on the device by pressing 'MEAS/on'.
  2. Aim the laser point at the target.
  3. Press 'MEAS/on' again to take a measurement. The measured result will be displayed on the screen immediately.
Person using the laser distance meter to measure a narrow crack.
Image: Measuring in a narrow space with the laser.

2. Electronic Angle Level Function

The device features an electronic angle sensor that refreshes the angle in real-time, ensuring higher accuracy for leveling tasks.

  • The current angle is displayed on the screen, updating as the device's orientation changes.
  • This is useful for checking slopes, ensuring level surfaces, or setting angles for installations.
NJTY L50P showing real-time angle measurement from 0 to 90 degrees.
Image: Real-time angle measurement display.

3. Multiple Measurement Modes

Press the 'FUNC' button to cycle through various measurement modes:

  • Distance: Single point-to-point measurement.
  • Continuous Measurement (Min/Max): Tracks the minimum and maximum distances as you move the device, useful for finding shortest/longest distances or diagonals.
  • Area: Measures length and width to calculate area.
  • Volume: Measures length, width, and height to calculate volume.
  • Pythagorean Theorem (Indirect Measurement): Calculates inaccessible distances using two or three measurements (Pythagoras 1, 2, and 3 modes).
Diagram showing various measurement modes: Distance, Continuous, Area, Volume, Pythagoras 1, Pythagoras 2, Pythagoras 3.
Image: Visual representation of multiple measurement modes.

4. Data Storage

The device can store up to 50 sets of measurement data. Press the 'Folder' icon button to access and scroll through your stored measurements.

Person using the laser distance meter, with a computer screen showing data storage of 50 sets.
Image: Data storage feature, showing 50 sets of data.

5. Unit Switching

Press the 'U' button to switch between different measurement units (e.g., meters, feet, inches).

Product Demonstration Video

Video: A short demonstration of the NJTY L50P's features, including electronic level, real-time angle, multiple measuring modes, and USB charging.

Maintenance

  • Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a dry, cool place, away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in use for extended periods.
  • Laser Lens: Keep the laser lens clean and free from dust or debris to ensure accurate measurements.

Troubleshooting

  • Device does not power on: Ensure the battery is charged. Connect the device to a power source using the Type-C cable and try again.
  • Inaccurate measurements:
    • Check if the laser lens is clean.
    • Ensure the measurement reference point (front/rear) is correctly set for your application.
    • Avoid measuring on highly reflective or transparent surfaces, which can interfere with laser accuracy.
    • Ensure the device is stable during measurement.
  • Laser not visible: The laser is Class 2 (<1mW) and may be difficult to see in bright sunlight. Try to shade the target area or use the device in lower light conditions.
  • Battery drains quickly: Ensure the device is fully charged. If the issue persists, the battery may need replacement (contact support).

Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the NJTY customer service directly. Keep your purchase receipt as proof of purchase.

© 2024 NJTY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.