ECHTpower 1133

Contents

ECHTpower Wireless Gamepad 1133 User Manual

Model: 1133

For PC, Nintendo Switch, Android, and iOS Devices

Introduction

Thank you for choosing the ECHTpower Wireless Gamepad 1133. This manual provides detailed instructions on how to set up, operate, and maintain your new gamepad. Please read this manual thoroughly before use to ensure optimal performance and a satisfying gaming experience.

Supported Platforms

  • Windows 7 and above
  • Nintendo Switch (NS) 3.0 and above
  • Android 8.0 and above
  • iOS 18 and above

Package Contents

Please check that all items are present in your package:

  • Game Controller x1
  • Controller Charging Dock x1
  • Controller Receiver x1
  • Type-C Charging Cable x1
  • User Manual x1
Package contents of ECHTpower Wireless Gamepad 1133, showing controller, charging dock, receiver, Type-C cable, and user manual.
Contents of the ECHTpower Wireless Gamepad 1133 package.

Product Specifications

Feature Specification
Product Model 1133
Product Dimensions 110*158*75mm
Product Weight 380g
Charging Power 5V/0.5A Max
Charging Time 3 hours
Battery Life 6-8 hours
Battery Capacity 800mAh
Battery Included Yes
Trigger Button Type Hall-Linear
Compatible Brand/Model PC
Type Gamepads

Controller Layout

Familiarize yourself with the buttons and features of your ECHTpower Wireless Gamepad.

Front view of the ECHTpower Wireless Gamepad 1133, showing Home, View, Menu, ABXY buttons, Left/Right Joysticks, D-pad, M button, and Channel Light.
Front View: Button Map
  • Home button: Powers on/off, returns to home screen.
  • View Button/- Button: Accesses system menus or specific game functions.
  • Menu Button/+ Button: Accesses system menus or specific game functions.
  • ABXY Buttons: Standard action buttons.
  • Left Joystick: Movement and camera control.
  • D-pad: Directional input.
  • M button: Multi-function button for programming and adjustments.
  • Channel Light: Indicates connection status and player number.
  • Right Joystick: Camera control and other functions.
Rear view of the ECHTpower Wireless Gamepad 1133, showing RB, LB, RT, LT buttons, Type-C Charging Port, Trigger Switch, M1/M2 programmable back buttons, and Reset Hole.
Rear View: Button Map
  • RB button: Right Bumper.
  • LB button: Left Bumper.
  • RT button: Right Trigger (Hall-Linear).
  • LT button: Left Trigger (Hall-Linear).
  • Type-C Charging Port: For charging the controller.
  • Trigger Switch: Adjusts trigger travel (Short-travel Micro Trigger 2mm, Long-travel Hall Trigger 9mm).
  • Toggle Switch (NS/BT/0): Switches between Nintendo Switch, Bluetooth, and Receiver modes.
  • M1/M2 buttons: Dual programmable back buttons for macros and remapping.
  • Reset Hole: For resetting the controller.
  • Charging Contact Point: For use with the charging dock.
Detailed view of the D-pad micro switch mechanism, showing 1M-click mechanical switches for lightning-fast actuation and crisp rebound.
D-Pad Micro Switch Mechanism

Setup Instructions

1. Initial Activation and Charging

Before using the controller for the first time, it must be charged to activate it. The controller cannot be activated by any other method.

  • Connect the Type-C charging cable to the controller's Type-C port and a power source.
  • Alternatively, place the controller on the charging dock.
  • The charging time is approximately 3 hours.

2. Bluetooth Connection to Nintendo Switch

  1. With the controller powered off, toggle the switch to the NS position.
  2. Hold the Home button for 3 seconds until the LED light flashes white.
  3. Turn on your Nintendo Switch console, navigate to the 'Controllers' menu, and select 'Change Grip/Order'.
  4. Wait for the Bluetooth pairing to complete.
Diagram showing steps for Bluetooth connection to Nintendo Switch, including toggling the switch, holding the Home button, and the Switch pairing screen.
Bluetooth Pairing Steps for Nintendo Switch

3. Wired Connection to Nintendo Switch

  • Connect the controller to the Nintendo Switch console via a USB cable.
  • Press any button on the controller to wake it up. It will be ready for use.
  • When the cable is disconnected, the controller automatically switches to Bluetooth connection with the Switch console.
Diagram illustrating wired connection of the gamepad to a Nintendo Switch console via a USB cable.
Wired Connection to Nintendo Switch

4. Connecting the Receiver to PC

  1. With the controller turned off, flip the toggle switch to the receiver position (indicated by a USB dongle icon).
  2. Press and hold the Home button for 3 seconds until the LED light flashes red.
  3. Plug the receiver into the PC's USB port.
  4. Press and hold the pairing button on the receiver for 3 seconds until its LED light flashes.
  5. Wait for pairing to complete. Once successful, the LED indicator on the receiver will remain lit.
  6. Alternatively, you can plug the receiver into the controller's base, connect the base to the PC via the data cable, and follow the above pairing steps.
Diagram showing steps for connecting the wireless receiver to a PC, including controller switch position, Home button press, plugging in receiver, and pressing receiver pairing button.
Receiver Connection to PC

5. Wired Connection to PC

  • Use a data cable to connect the controller to your computer.
  • Press the Home button on the controller to start up and use it normally.
Diagram showing wired connection of the gamepad to a PC via a USB cable.
Wired Connection to PC

6. Bluetooth Connection (PC/iOS/Android Phone/TV)

  • When the controller is turned off, switch the power switch to “BT” mode.
  • Press and hold the Home button for 3 seconds until the LED light flashes blue (entering pairing mode).
  • Open the device's Bluetooth settings, search for and connect to "Xbox Wireless Controller".
Diagram showing Bluetooth connection steps for PC, iOS, Android, and TV, including switching to BT mode, holding Home button, and connecting to 'Xbox Wireless Controller'.
Bluetooth Connection to PC/iOS/Android/TV

Operating Instructions

1. Controller PC Mode Switch

Mode switching is only available when connected via a wired connection or receiver. It is not supported when connected via Bluetooth (including PC) or other devices.

  • After the controller is properly connected to the PC, the initial state is Xinput mode. Device name: Xbox 360 controller, LED display: red steady light.
  • In Xinput mode, press and hold the View Button/- Button and Menu Button/+ Button simultaneously for 3 seconds to switch to Dinput mode. Device name: Gamepad, LED display: red and blue LEDs lit.
  • In Dinput mode, press and hold the View Button/- Button and Menu Button/+ Button simultaneously for 3 seconds to switch to NS mode. Device name: Pro Controller, LED display: blue LED stays on.
  • In NS mode, holding down the View Button/- Button and Menu Button/+ Button simultaneously for 3 seconds switches back to Xinput mode.

2. Rapid Fire Function (Turbo Function)

Supported buttons for Rapid Fire: ABXY buttons, LB/RB buttons, LT/RT triggers.

  • Manual Rapid Fire: Hold down the M button and press the desired button once to activate the manual rapid fire function.
  • Automatic Rapid Fire: After setting manual rapid fire, hold down the M button again and press the same button once to switch to the automatic rapid fire function.
  • Burst Fire Clear: After setting burst fire, hold down the M button and press the same button once to disable the burst fire function.
  • Clear All Burst Fire at Once: Hold down the M button for 5 seconds to disable the burst fire function for all buttons.

3. Back Button Programming Function (M1/M2)

Supported buttons for programming: ABXY, D-pad, LB, RB, LT, RT, L3, R3.

  • Back Button Setting: After successfully connecting the controller, hold down the M1 or M2 button, then press the M button for 2 seconds. The status indicator light will flash slowly. Release all buttons. Input the action buttons you wish to record in sequence. After recording is complete, press the M1 or M2 button again to finish the setup. The controller will vibrate once. Up to 16 buttons can be recorded.
  • Back Button Clear: Hold down the M1 or M2 button, then press the M button for 2 seconds. The status indicator light will flash slowly. At this point, press the M1 or M2 button again to clear the back button (M1 or M2) you wish to delete.

4. Vibration Intensity Adjustment Function

The motor vibration intensity has four levels: 100%-60%-30%-0%. The factory default vibration intensity level is 60%.

  • After successfully connecting the controller to the device, press and hold the M key, then push the left joystick up and down to adjust the motor vibration intensity.

5. RGB Light Mode Switching Function

Four RGB light modes: asynchronous different colors breathing, synchronous same colors breathing, synchronous different colors breathing, and mixed colors.

  • Press the M key + R3 key once to switch the light mode.

6. RGB Light Brightness Adjustment Function

Three levels of RGB light brightness: 100%-60%-30%. Factory default is 100% brightness.

  • Decrease brightness: Hold down the M key and tilt the left joystick to the left.
  • Increase brightness: Hold down the M key and tilt the left joystick to the right.
  • Turn RGB on and off: Hold down the M key + R3 key for 5 seconds.

7. Joystick and Trigger Calibration Function

  1. Place the controller flat on a table and ensure that it is turned off.
  2. Press the L3 and R1 buttons simultaneously and wait for the controller's LED light to flash red and green alternately to enter calibration mode.
  3. Press the A button, and the blue LED light will illuminate.
  4. Pick up the controller and rotate the left and right joysticks three times each.
  5. Press the long-travel trigger all the way down three times.
  6. Press the A button again. The green LED light will illuminate, indicating calibration is complete. The controller will automatically power off.

8. Controller Reset

When the controller malfunctions or freezes, simply charge the controller to reset it.

9. Other Functions (KeyLinker App)

For functions such as firmware updates, key setting changes, and joystick dead zone adjustments, please download the “KeyLinker" application to configure settings.

User Tips

  • Initial Activation: Remember that the controller can only be activated by charging it for the first time. No other method will work.
  • Automatic Sleep Mode: To conserve battery, the controller will automatically enter sleep mode after approximately 5 minutes of inactivity (no key presses) when paired with a device.
  • High Polling Rate: For optimal performance on PC, ensure your system supports a 1000 Hz polling rate when connected wirelessly via the receiver.

Troubleshooting

  • Controller Unresponsive/Frozen: If the controller stops responding or freezes, connect it to a power source to charge. This action will reset the controller.
  • Pairing Issues: Ensure the controller is in the correct mode (NS, BT, or Receiver) for your device. Double-check that the LED indicators are flashing as described in the setup instructions. For Bluetooth, ensure your device is searching for "Xbox Wireless Controller".
  • Connectivity Drops: If experiencing frequent disconnections, ensure the controller is fully charged. For wireless connections, try to minimize interference from other wireless devices.
  • Buttons Not Responding: Perform a controller reset by charging it. If the issue persists, consider using the KeyLinker app for firmware updates or button remapping.
  • Inaccurate Joystick/Trigger Input: Perform the Joystick and Trigger Calibration function as described in the operating instructions.

Care and Maintenance

  • Avoid Liquids: Do not expose the controller to liquid.
  • No Disassembly: Do not attempt to disassemble the controller. This will void the warranty and may cause damage.
  • Handle with Care: Avoid dropping the controller.
  • Temperature: Avoid exposing the controller to extremely high or low temperatures.
  • Cleaning: Use a soft, dry cloth to clean the controller. Do not use harsh chemicals or abrasive materials.

Warranty and Support

For technical support or inquiries, please contact ECHTpower customer service:

  • Tel: 0755-21010839
  • Email: service@echtpower.com
  • Web: www.echtpower.com
  • Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
  • Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen

Declaration of Conformity

The product Model 1133 conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. announces that 1133 radio equipment conforms to the Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

The full text of the EU Declaration of Compliance can be found on: www.echtpower.com

The product also conforms to UK standards for radio interference. The full text of the UKCA Declaration of Compliance can be found on: www.echtpower.com

FCC and CE compliance markings, indicating product adherence to regulatory standards.
Compliance Markings
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.