SKYFAME G-RZ-FD60

Contents

SKYFAME Car 16pin Wiring Harness Adapter and Canbus Box Decoder

Instruction Manual for Android Radio Power Cable (Model: G-RZ-FD60)

1. Introduction

This manual provides detailed instructions for the installation and operation of the SKYFAME Car 16pin Wiring Harness Adapter and Canbus Box Decoder. This product is designed to facilitate the connection of an aftermarket Android car audio system to various Ford vehicle models, ensuring proper communication and power supply without the need for cutting original vehicle wires.

2. Product Overview

The SKYFAME wiring harness adapter and Canbus box decoder is an essential component for integrating an Android car radio into compatible Ford vehicles. It provides a standard 16-pin main power line interface and includes a Canbus protocol box to translate vehicle data (such as steering wheel controls, reverse gear signals, and ACC power) for the Android head unit. The design ensures a plug-and-play installation, preserving the integrity of the original vehicle's wiring.

SKYFAME Car 16pin Wiring Harness Adapter and Canbus Box Decoder
Figure 2.1: Complete SKYFAME Wiring Harness Adapter and Canbus Box Decoder.
Close-up of SKYFAME Wiring Harness and Canbus Box
Figure 2.2: Close-up view of the wiring harness and Canbus box assembly.

3. Compatible Models

This wiring harness and Canbus box decoder is compatible with various Ford models. Please verify your vehicle's model and year against the list below and the Canbus box label for exact compatibility.

Canbus Box Model G-RZ-FD60 Compatibility:

  • Ford Kuga: 2013-2017, 2016-2019
  • Ford Ecosport: 2013-2017, 2013-2018, 2019
  • Ford Escape: 2013-2017
  • Ford Fiesta: 2014, 2013-2014
  • Ford Tourneo: 2016-2017, 2017, 2019-2021 (courier)
  • Ford Mondeo: 2013-2020, 2007-2012
  • Ford Puma: 2022
  • Ford S-Max
  • Ford Edge: 2015-2020
  • Ford Everest: 2016-2020
  • Ford Transit: 2022
  • Ford TRUPUS: 2015-2018
  • Ford Titanium: 2020
  • Ford Focus: 2016-2017, 2019, 2019-2020, 2021, 2005-2018
  • Ford Ranger: 2016-2019, 2020-2021
Close-up of G-RZ-FD60 Canbus box with compatible models
Figure 3.1: Canbus Box (G-RZ-FD60) showing compatible models and software/hardware versions.
Close-up of FORD-RZ-10 Canbus box
Figure 3.2: Canbus Box (FORD-RZ-10).
Close-up of RZ-FD10 Canbus box
Figure 3.3: Canbus Box (RZ-FD10).

4. Package Contents

The package typically includes the following components:

  • 1x SKYFAME 16pin Wiring Harness Adapter
  • 1x RAISE Canbus Box Decoder (Model G-RZ-FD60, FORD-RZ-10, or RZ-FD10, depending on vehicle compatibility)
  • Various RCA cables for audio/video input/output
  • Additional connectors for USB, GPS, Radio Antenna, etc.
Wiring harness with various connectors
Figure 4.1: Overview of the wiring harness and included connectors.

5. Installation

The installation process is designed to be plug-and-play, requiring no cutting of original vehicle wires. However, professional installation is highly recommended due to the complexity of car audio systems and Canbus integration.

Installation Steps:

  1. Preparation: Ensure the vehicle's battery is disconnected before starting any electrical work.
  2. Connect Main Power Line: Connect the 16-pin main power line interface of the harness to your Android head unit.
  3. Vehicle Connection: Connect the vehicle-specific connectors from the harness to the corresponding ports in your car's wiring system. These are designed to match the original vehicle's standard.
  4. Canbus Box Integration: Connect the Canbus box decoder to the designated port on the wiring harness.
  5. Accessory Connections: Connect any additional accessories such as the radio antenna, USB cables, GPS navigation antenna, reverse video input cable, 360 reserve camera, and 4G antenna to their respective ports on the Android head unit via the provided RCA and other connectors.
  6. Secure Wiring: Ensure all connections are secure and properly routed to prevent interference or damage.
Wiring harness with pinout diagram
Figure 5.1: Wiring harness showing main connectors and a small pinout diagram (FL+, FL-, etc.).
Detailed wiring diagram for Android head unit connection
Figure 5.2: Detailed wiring diagram illustrating connections to an Android head unit, including Canbus box, power lines (KEY1, REVERSE, BRAKE CTL, AUTO ANT, ACC, Battery +12V, Battery GND), audio outputs (FR+, FR-, RR+, RR-, FL+, FL-, RL+, RL-), and various input/output ports.

6. Operation

After physical installation, the Android head unit requires configuration to properly utilize the Canbus decoder.

Configuration Steps:

  1. Power On: Reconnect the vehicle's battery and power on the Android head unit.
  2. Access Factory Settings: Navigate to the factory settings menu on your Android host. This usually requires a specific password (refer to your Android head unit's manual).
  3. Select Canbus Configuration: Within the factory settings, locate the car bus configuration menu.
  4. Choose Canbus Brand and Model: Select the corresponding CANbus brand (RAISE) and the specific model (e.g., G-RZ-FD60, FORD-RZ-10, RZ-FD10) from the available options.
  5. Update Firmware (Recommended): It is recommended to connect the Android head unit to Wi-Fi and update to the latest MCU (Microcontroller Unit) and configuration files for optimal performance and compatibility.

Once configured, the Android head unit should be able to communicate with the vehicle's Canbus system, enabling features like steering wheel controls, automatic reverse camera activation, and proper ignition power management.

7. Maintenance

The SKYFAME wiring harness and Canbus box decoder are designed for durability and require minimal maintenance. Ensure all connections remain secure and free from moisture or physical damage. Periodically check for any loose wires or connectors, especially after driving on rough terrain.

8. Troubleshooting

If you encounter issues after installation, consider the following troubleshooting steps:

  • No Power to Android Unit: Double-check all power connections, including the 16-pin main power line and the vehicle's battery connection. Ensure the ACC wire is receiving power when the ignition is on.
  • Canbus Features Not Working (e.g., Steering Wheel Controls): Verify that the Canbus box is correctly connected and that the appropriate Canbus brand and model have been selected in the Android head unit's factory settings. Ensure the Android unit's MCU and configuration files are up to date.
  • Audio Issues: Check all RCA audio connections between the harness and the Android unit.
  • Reverse Camera Not Activating: Confirm the reverse video input cable is correctly connected and the Canbus settings are properly configured to detect the reverse signal.
  • Compatibility Issues: Note that some decoders may only be compatible with specific Android head unit solution providers (e.g., TOPWAY, XYAUTO, NOWADA, FTYTEK). If issues persist, consult the manufacturer of your Android head unit.

If problems persist, please refer to the Warranty and Support section for assistance.

9. Specifications

Feature Specification
Brand SKYFAME
Model Name G-RZ-FD60 (also FORD-RZ-10, RZ-FD10 variants)
Canbus Box Brand RAISE
Main Power Line Interface 16-pin
External Testing Certification CCC
Origin Mainland China
Package Length 26 cm
Package Width 20 cm
Package Height 6 cm
Package Weight 0.19 kg
Wiring harness with length measurement
Figure 9.1: Wiring harness illustrating a cable length of 22cm.

10. User Tips

  • Professional Installation: For optimal performance and to avoid potential damage to your vehicle's electrical system or the product, it is strongly recommended to have the wiring harness and Canbus box installed by a qualified professional or an experienced individual.
  • Firmware Updates: Always ensure your Android head unit's MCU and configuration files are updated to the latest version, especially after initial installation or if you experience compatibility issues.
  • Verify Compatibility: Before installation, double-check the specific Canbus box model (e.g., G-RZ-FD60, FORD-RZ-10, RZ-FD10) against your vehicle's make, model, and year to ensure full functionality.

11. Warranty and Support

All SKYFAME products come with a one-year warranty against manufacturing defects. If you encounter any defects within this period, please contact customer support for assistance.

For any problems encountered during use, please provide detailed feedback, preferably with videos and pictures, to our customer support team. We aim to respond and provide solutions within 12 hours.

Please note that the warranty does not cover issues caused by abuse, human damage, accidental damage, water ingress, improper operation, or exceeding the prescribed scope of use.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.