1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your INQMEGA Ubox 4K 60X Optical Zoom Solar Camera. This advanced security camera features 12MP Ultra HD resolution, dual lenses for simultaneous monitoring, 60X optical zoom, and a solar-powered design for 100% wire-free operation. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Figure 1.1: Key Features of the Solar Camera
2. Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
- Ensure all connections are secure and properly insulated before operation.
- Do not expose the camera or solar panel to extreme temperatures, corrosive substances, or open flames.
- Keep the solar panel clean and free from obstructions for optimal charging performance.
- Do not attempt to disassemble, modify, or repair the camera yourself. Unauthorized tampering may void the warranty and pose safety risks. Contact customer support if issues arise.
- Use only the provided power cable and accessories to prevent damage.
3. Package Contents
Verify that all items listed below are included in your package:
Figure 3.1: Detailed List of Product Components
- Camera x 1
- Solar Panel x 1
- User Manual x 1
- Camera Bracket x 1
- Solar Panel Bracket x 1
- Power Cable x 1
- Screw Package x 1
Note: This camera does not support ONVIF to work with NVR or DVR. PC client is not supported.
4. Specifications
| Feature | Description |
|---|---|
| Brand Name | INQMEGA |
| Model Number | 637-60X |
| Resolution | 12MP Ultra HD (Dual 6MP HD Resolution) |
| Lens (mm) | 2.8mm (wide-angle) + 5-50mm (60x zoom PTZ) |
| Optical Zoom | 60X |
| Viewing Angle | 360° (PTZ) |
| Pan & Tilt | Pan 355°, Tilt 100° |
| Connectivity | 2.4G WiFi, 4G (Optional) |
| Supported Mobile Systems | iOS, Android (UBox App) |
| Sensor | CMOS, 1/2.7" Sensor Size |
| Audio Output | 1CH BNC (Two-way audio) |
| Technology | Infrared (IR) |
| Night Vision | Color & IR Night Vision (IR distance 40 meters) |
| Alarm Type | Local Alarm, PIR + AI Humanoid Detection |
| PIR Detection Distance | Within 12 meters |
| Power Source | Solar Panel (6W) with built-in 10050mAh battery |
| Storage | TF Card (Max 128GB, 256GB with INQMEGA card), Cloud Storage (Amazon Cloud) |
| Waterproof Rating | IP66 |
| Installation | Normal (Ceiling Hanging, Wall Mounting) |
| Origin | Mainland China |
Figure 4.1: Product Parameters and Components
Figure 4.2: Solar Panel Dimensions
Figure 4.3: Product Features Overview
5. Setup Guide
5.1 Physical Installation
The camera supports multiple installation methods, including ceiling hanging and wall mounting. Choose the method best suited for your environment and ensure a stable mounting surface.
Figure 5.1: Multiple Installation Methods (Ceiling Hanging & Wall Mounting)
- Attach Bracket: Secure the camera bracket to your desired location (ceiling or wall) using the provided screws. Ensure the bracket is firmly attached.
- Mount Camera: Carefully slide the camera onto the attached bracket until it clicks securely into place.
- Adjust Solar Panel: Position the solar panel to receive maximum direct sunlight throughout the day for optimal charging.
5.2 Powering the Camera
Connect the solar panel to the camera using the 3m extension cord. The solar panel will charge the built-in 10050mAh battery, providing uninterrupted power day and night. Ensure the connection is tight and weatherproof.
Figure 5.2: Solar Energy Connection and Charging
5.3 App Setup (UBox)
- Download App: Download the "UBox" app from your mobile device's app store (available for iOS and Android).
- Create Account: Open the app and create a new account or log in if you already have one.
- Add Camera: Tap the '+' icon to add a new device. You can add the camera using either Bluetooth quick connection or by scanning the QR code located on the camera body.
- Network Configuration: Follow the on-screen prompts to connect the camera to your 2.4GHz WiFi network. If you have the 4G version, configure the 4G connectivity as instructed.
- Initial Setup: Complete any remaining setup steps, such as naming your camera and setting initial preferences.
6. Operating Instructions
6.1 PTZ Rotation and Zoom
Control the camera's pan, tilt, and zoom functions directly from the UBox app to adjust your viewing area.
- Pan: Rotate the camera horizontally up to 355° to cover a wide area.
- Tilt: Adjust the camera vertically up to 100° to change the vertical viewing angle.
- 60X Optical Zoom: Use the zoom controls in the app to magnify or reduce the view, allowing for detailed inspection of distant objects without loss of clarity.
Figure 6.1: PTZ Rotation Control via App
Figure 6.2: Demonstrating 60X Optical Zoom
6.2 Dual View Monitoring
The camera features dual lenses, providing two simultaneous video streams within the UBox app. One stream is from the wide-angle lens, and the other is from the zoom lens, helping to avoid monitoring dead ends and blind zones.
- Free Switching: Double-click on either view in the app to switch between them or to make one view primary.
- Drag to View: The zoom lens can follow the position of the wide-angle lens. Simply drag a selection box on the wide-angle view to control what the zoom lens focuses on.
Figure 6.3: Dual View Monitoring Interface
Figure 6.4: Drag to View Functionality
6.3 Video Quality
The camera provides 12MP Super HD videos and live view, achieved by combining two 6MP HD resolutions. This ensures a clear, smooth picture that accurately records details in the monitoring area.
Figure 6.5: 12MP Super HD Video Quality
6.4 Night Vision Modes
The camera offers two night vision modes for optimal visibility in low-light conditions:
- Color Night Vision: Utilizes white LED lights to provide full-color video in the dark.
- IR Night Vision: Uses infrared (IR) LED lights for clear black and white video, effective up to 40 meters.
You can switch between these modes within the UBox app settings to suit your monitoring needs.
Figure 6.6: Color vs. IR Night Vision Comparison
6.5 Two-Way Audio
The built-in microphone and speaker allow for clear two-way voice communication. Use the intercom function in the UBox app to speak with visitors, delivery personnel, or deter potential intruders from a distance.
Figure 6.7: Two-Way Audio Communication
6.6 PIR Human Detection & Tracking
The camera features advanced PIR (Passive Infrared) and AI humanoid detection. When a moving object, specifically a human, is detected within 12 meters, the camera will:
- Automatically wake up and begin recording.
- Send an instant alarm notification to your UBox app.
- Pan or tilt to automatically follow the detected human's movement (Human Tracking).
You can configure the PIR detection sensitivity and set specific alarm deployment times within the app settings.
Figure 6.8: PIR Human Detection and Tracking
6.7 Preset Points & Guards
Set up to four preset points in the UBox app to quickly navigate the camera to important, pre-defined areas without manual adjustment. This allows for rapid monitoring of critical zones.
Figure 6.9: Preset Points for Quick Viewing
6.8 Storage Options
The camera supports both local and cloud storage for recorded video and audio, ensuring safe backup and that important information is not missed.
- TF Card Storage: Insert a TF card (up to 128GB, or 256GB with an INQMEGA provided card) into the designated slot. The camera will automatically record and save detected events locally.
- Cloud Storage: Utilize Amazon Cloud storage for secure backup of your recordings. This service typically requires a subscription and provides an additional layer of data security.
Figure 6.10: Multiple Storage Methods
6.9 Multi-User Remote Access
You can share access to your camera with family and friends through the UBox app. This feature allows multiple authorized users to remotely view the live feed and recorded events from anywhere.
Figure 6.11: Multi-User Access
7. Maintenance
- Cleaning: Regularly wipe the camera lens, IR/white LEDs, and solar panel with a soft, damp cloth to remove dust, dirt, and debris. A clean solar panel ensures efficient charging.
- Weather Resistance: The camera has an IP66 waterproof rating, making it highly resistant to rain, dust, snow, and hot weather. While designed for outdoor use, avoid submerging the camera in water or exposing it to high-pressure water jets.
- Battery Health: The solar panel continuously charges the built-in battery. Ensure the solar panel is positioned in an area with ample direct sunlight for optimal battery performance and longevity.
- Firmware Updates: Periodically check the UBox app for available firmware updates. Installing updates ensures your camera has the latest features, security enhancements, and bug fixes.
Figure 7.1: IP66 Waterproof Rating
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not connecting to Wi-Fi/4G | Incorrect Wi-Fi password, weak signal, 4G SIM card issues, incorrect network type (e.g., 5GHz Wi-Fi). | Ensure correct password. Move camera closer to a 2.4GHz Wi-Fi router. Check 4G signal and SIM card activation. Reconfigure network via UBox app. |
| No video feed in app | Camera offline, network issue, app malfunction, insufficient battery. | Check camera's power and network connection. Ensure solar panel is charging. Restart camera and app. Verify internet connectivity on your phone. |
| Poor night vision quality | Dirty lens, IR/white LEDs obstructed, incorrect night vision mode selected. | Clean the camera lens. Ensure no obstructions block the LEDs. Switch between Color and IR Night Vision modes in the app settings. |
| PIR detection not working or false alarms | PIR sensor obstructed, sensitivity too low/high, incorrect alarm settings, environmental factors (e.g., moving branches). | Ensure PIR sensor is clear. Adjust PIR sensitivity in app settings. Check alarm deployment time settings. Minimize environmental factors. |
| Solar panel not charging battery | Insufficient sunlight, dirty panel, faulty connection, panel orientation. | Relocate panel to an area with more direct sunlight (4-6 hours daily). Clean the solar panel surface. Check the connection cable between the panel and camera. Adjust panel angle for optimal sun exposure. |
| Two-way audio issues | Microphone/speaker obstruction, app volume settings, network latency. | Ensure microphone and speaker are clear. Check volume settings in the app and on your phone. Verify stable network connection. |
9. User Tips
- For optimal solar charging, ensure the solar panel is installed in a location that receives at least 4-6 hours of direct sunlight daily, especially during peak sun hours.
- Regularly check the UBox app for notifications and review recorded events to stay informed about activities on your property.
- When setting up preset points, choose distinct landmarks or areas of high activity to make camera navigation quick and accurate.
- Consider utilizing the cloud storage option for important recordings to ensure data safety and accessibility, even if the local TF card is compromised or full.
- To maximize battery life, adjust PIR sensitivity and recording duration settings in the app to capture only relevant events.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official INQMEGA website. Keep your purchase receipt as proof of purchase for any warranty claims.