Flytec V802 Pro

Contents

Flytec V802 Pro RC Bait Boat User Manual

Model: V802 Pro | Brand: Flytec

1. Introduction

Thank you for choosing the Flytec V802 Pro RC Bait Boat. This advanced remote-controlled bait boat is designed to enhance your fishing experience with its intelligent features, including GPS positioning, automatic return, and a large bait capacity. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new bait boat. Please read it thoroughly before first use.

Flytec V802 Pro RC Bait Boat with remote control and accessories

Figure 1: Flytec V802 Pro RC Bait Boat and included components.

2. Package Contents

Please check the package contents carefully upon unboxing. If any items are missing or damaged, contact your retailer.

  • 1x Flytec V802 Pro Bait Boat
  • 1x Remote Controller
  • 1x 18000mAh 7.4V Boat Battery
  • 2x Antennas
  • 2x Control Sticks
  • 1x Remote Control Back Cover Screw
  • 1x Hanging Rope
  • 1x USB Charging Cable
  • 1x Instruction Manual
  • 2x Propellers

Note: 4x AA batteries for the remote control are NOT included and must be purchased separately.

All components included in the Flytec V802 Pro package

Figure 2: Visual representation of all items included in the package.

3. Product Features

  • Waterproof Design: Features a 5-level wind resistant, seamless hull and a fully enclosed waterproof cabin for reliable operation in various water conditions.
  • Waterproof hull design of the V802 Pro bait boat

    Figure 3: The V802 Pro's waterproof and wind-resistant hull.

  • High Bait Capacity: Equipped with 4 independent bait chambers, capable of carrying a maximum load of 3KG of bait.
  • Four independent bait chambers on the V802 Pro bait boat

    Figure 4: The four independent bait chambers with 3KG max load capacity.

  • Advanced GPS Positioning: Supports up to 160 fixed positioning points for precise bait delivery and automatic navigation.
  • Multi-Satellite Hybrid Engine Positioning: Utilizes GPS L1, Galileo E1, G1SBAS L1, GLONASS, QZSS L1, and BEIDOU B1 for highly accurate positioning within 1 meter.
  • Diagram showing multi-satellite hybrid engine positioning systems

    Figure 5: Multi-satellite positioning for enhanced accuracy.

  • Automatic Return Functions: Features automatic return to the starting point in cases of lost signal, low battery, or exceeding the control range (superflight).
  • Diagram illustrating fixed-point baiting and automatic return paths

    Figure 6: Fixed-point baiting and automatic return capabilities.

  • Gyroscope System: A built-in gyroscope automatically corrects yaw, ensuring the boat maintains a straight course even in wind, waves, and under load.
  • Illustration of the gyroscope system correcting boat yaw

    Figure 7: Gyroscope system for stable navigation.

  • Cruise Control: Offers a fixed-speed cruise function for consistent movement.
  • Instructions for activating cruise mode on the remote control

    Figure 8: Cruise mode activation.

  • Long-Range Remote Control: High-frequency wireless remote control with a stable signal transmission and reception range of up to 500 meters, supported by dual antennas.
  • Diagram showing 500 meters remote control distance

    Figure 9: 500-meter remote control range.

  • Night Navigation Lights: High-bright front and rear dual-color LED lights provide clear positioning and enhanced safety during night fishing.
  • Close-up of the blue and red LED night lights on the bait boat

    Figure 10: Front and rear LED night lights.

  • Efficient Power System: Dual power cables support uninterrupted power supply from dual batteries (if two are installed).
  • Internal view of the dual battery compartment

    Figure 11: Dual battery compartment for extended operation.

  • Powerful Propulsion: Equipped with powerful propellers and anti-winding protective covers to effectively prevent weeds and debris from entanglement.
  • Close-up of the powerful propellers with anti-winding protective covers

    Figure 12: Propellers with anti-winding covers.

  • Hook Feeding Support: Features a stern hook design to support hook feeding for precise bait placement.
  • Stern hook design for attaching a fish finder or hook feed line

    Figure 13: Stern hook design for fish finder or hook feed line.

  • Additional: Low battery reminder, real-time distance transmission.

4. Setup

4.1 Battery Installation

  • Boat Battery: Open the battery compartment on the bait boat. Insert the 7.4V 18000mAh lithium battery and ensure it is securely connected to the boat's power connector. Close the compartment.
  • Remote Control Batteries: Open the battery cover on the back of the remote control. Insert 4x AA batteries (not included), ensuring correct polarity. Close the cover.

4.2 Antenna Installation

Carefully screw the two provided antennas onto the designated antenna ports located on the top of the bait boat. Do not overtighten.

4.3 Power On Sequence

  1. First, turn on the bait boat using its power switch.
  2. Next, turn on the remote control. The remote control should automatically connect to the boat. If not, refer to the full instruction manual for pairing procedures.

4.4 Initial Calibration

Before first use, or when operating in a new location, perform the Beidou intelligent calibration as detailed in the comprehensive instruction manual. This ensures accurate GPS functionality and stable navigation.

5. Operation

5.1 Remote Control Overview

Diagram of the remote control with labeled buttons and joysticks

Figure 14: Remote Control Layout.

  • Left Joystick: Controls forward/backward movement and left/right turning.
  • Right Joystick: Controls bait chamber release (specific controls for front/back, left/right silos).
  • Lighting Button: Toggles the boat's LED lights.
  • Battery Indicator: Displays the remote control's battery level.
  • GPS Button: Activates GPS functions, including setting and recalling fishing points.
  • Calibration: Initiates the Beidou intelligent calibration.
  • Cruise: Activates/deactivates cruise control.
  • Original: Returns to the original starting point.
  • Delete: Deletes saved fishing points.
  • OK/UP/LEFT/RIGHT/DOWN: Navigation buttons for menu selection on the remote's display.

5.2 Basic Movement

Use the left joystick to control the boat's direction. Push forward to move forward, pull back to move backward, and move left/right to turn.

5.3 Bait Release

The boat has four independent bait chambers. Use the corresponding controls on the remote (typically the right joystick or dedicated buttons) to open and release bait from each chamber individually or simultaneously.

Bait boat releasing bait from its chambers

Figure 15: Bait release in action.

5.4 Fixed-Point Baiting & Navigation

The V802 Pro can store up to 160 fixed fishing points across 4 fishing grounds. Use the GPS functions on the remote control to:

  • Set Points: Navigate the boat to your desired location and save it as a fishing point.
  • Navigate to Points: Select a saved point, and the boat will automatically navigate to it.
  • Cruise Between Points: Program the boat to cruise between multiple saved points.
Diagram showing fixed-point baiting and auto-return paths

Figure 16: Fixed-point baiting and auto-return.

5.5 Cruise Control

To activate fixed-speed cruise mode, push both joysticks forward for approximately 5 seconds. The boat will maintain its current speed and direction. To exit cruise mode, pull both joysticks back.

5.6 Automatic Return

The boat is equipped with several automatic return features:

  • Lost Signal Return: If the boat loses connection with the remote control, it will automatically return to its last known starting point.
  • Low Power Return: When the boat's battery reaches a critically low level, it will automatically initiate a return to the starting point.
  • Superflight Return: If the boat travels beyond the maximum control range, it will automatically return.

5.7 Night Fishing

Activate the boat's high-bright front and rear LED lights using the remote control for improved visibility and precise positioning during night operations.

5.8 Hook Feeding

Utilize the stern hook design to attach your fishing line with a hook for accurate and controlled bait delivery directly to your desired fishing spot.

Video 1: Product demonstration showing various features of the bait boat.

6. Maintenance

6.1 Cleaning

  • After each use, especially in saltwater, thoroughly rinse the boat hull and propellers with fresh water to remove any salt, dirt, or debris.
  • Ensure all compartments are dry before closing and storing the boat.

6.2 Battery Care

  • Always charge the boat battery fully after each use to prolong its lifespan.
  • Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
  • If storing the boat for an extended period, charge the boat battery to approximately 50-60% capacity.
  • Remove AA batteries from the remote control if it will not be used for a long time to prevent potential leakage and damage.

6.3 Propeller Inspection

  • Regularly inspect the propellers and their anti-winding protective covers for any entangled weeds, fishing lines, or other debris.
  • Carefully remove any obstructions to maintain optimal propulsion and prevent motor strain.

6.4 General Storage

Store the bait boat and remote control in a dry, shaded area, protected from dust and moisture. Avoid placing heavy objects on top of the boat.

7. Troubleshooting

ProblemPossible CauseSolution
Boat not responding to remote controlLow battery in boat or remote; Out of range; Connection issueCharge all batteries. Ensure boat is within 500m range. Power cycle both devices. Re-pair if necessary (refer to full manual).
Boat not sailing straightGyroscope needs calibration; Propeller obstructionPerform Beidou intelligent calibration. Check propellers for debris.
Bait not releasingBait chambers overloaded; Mechanical obstructionReduce bait load. Inspect release mechanism for blockages.
GPS positioning inaccuratePoor satellite signal; Calibration neededOperate in an open area with clear sky. Perform Beidou intelligent calibration.
Low battery warningBoat battery is lowReturn the boat to shore immediately and recharge the battery.

8. Specifications

FeatureDetail
Model No.V802 Pro
MaterialABS Plastic, Electronic Components
ColorBlack / Orange
Bait Load Capacity3 KG
Boat Dimensions (L x W x H)52.7 cm x 26.4 cm x 50 cm (20.6 in x 10.4 in x 19.7 in)
Motor390 Powerful Motor
Remote Control Frequency2.4G
Control DistanceUp to 500 meters
Boat Battery7.4V 18000mAh Lithium Battery (also available in 5200mAh/12000mAh options)
Remote Control Battery4x AA Batteries (Not Included)
Charging Time (Boat Battery)6-10 hours (depending on capacity)
Playing Time (Boat Battery)2-6 hours (depending on capacity)
Speed250 meters/minute
Bait Chambers4 Independent Silos
GPS Positioning Points160 points
Positioning AccuracyWithin 1 meter
Package Weight3259g
Diagram showing boat dimensions and key specifications

Figure 17: Boat dimensions and specifications.

9. User Tips

  • Battery Life: Always ensure both the boat and remote control batteries are fully charged before heading out for a fishing trip to maximize operating time and prevent unexpected auto-returns.
  • Range Awareness: While the boat has a 500m range, it's good practice to keep it within a comfortable visual distance, especially in windy conditions or strong currents, to maintain optimal control.
  • GPS Calibration: Regularly calibrate the GPS system, especially when operating in new locations, to ensure precise bait delivery and accurate auto-return functionality.

10. Warranty & Support

10.1 Warranty Information

The Flytec V802 Pro RC Bait Boat comes with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please note that the warranty does not cover damage caused by human error, misuse, accidents, unauthorized modifications, or improper maintenance.

Important: If product damage is caused by human-made factors, the warranty will be void.

10.2 Technical Support

For any technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please refer to the detailed instruction manual included in your package. You may also contact the seller or manufacturer's customer support directly for further assistance.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.