STARTRC X100

Contents

GPS Remote Controller Instruction Manual

Model: X100

1. Introduction

This manual provides detailed instructions for the safe and effective use of your STARTRC X100 GPS Remote Controller. Please read this manual thoroughly before operating the device and keep it for future reference.

The STARTRC X100 is a Bluetooth 5.0 enabled remote control designed for Insta360 X4, Ace Pro, and Go 3S cameras. It features integrated GPS for motion data recording and offers versatile mounting options.

A hand holding the compact STARTRC X100 GPS Remote Controller.
Figure 1.1: The compact STARTRC X100 GPS Remote Controller.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Package Contents

Ensure all items are present and in good condition upon unpacking:

  • 1 x Bluetooth-Compatible Remote Control (Model X100)
  • 1 x Wrist Strap
  • 1 x Bicycle Strap
  • 1 x Charging Cable (Type-C)
  • 1 x Instruction Manual
Package contents including the remote control, wrist strap, bicycle strap, and charging cable.
Figure 3.1: Contents of the product package.

4. Specifications

Feature Detail
Model Number X100 (1153415)
Type Action Camera Remote Control
Compatible Camera Brands Insta360 (X4 series, ACE PRO series, Go3s series)
Connectivity Bluetooth 5.0
Wireless Range Up to 25 meters
GPS Positioning Multi-mode satellite positioning module for motion data recording
Color Black
Material ABS
Battery Capacity 400mAh
Product Weight 29g
Product Dimensions (L x W x H) 46.00 x 40.00 x 12.50 mm (1.81 x 1.57 x 0.49 inches)
Origin Mainland China
Diagram showing the dimensions of the remote control: 40mm width, 46mm height, and 12.5mm thickness.
Figure 4.1: Product dimensions.

5. Setup and Installation

5.1 Unpacking and Initial Inspection

  1. Remove all packaging materials and protective films from the remote control and accessories.
  2. Inspect the product and accessories for any visible damage. Do not use if damaged.

5.2 Mounting the Remote Control

The remote control offers two primary fixation methods:

  • Wrist Attachment: Use the provided wrist strap for close-range sports and general use. The extended wrist strap is designed to fit most users.
  • Handlebar/Bag Attachment: Use the provided bicycle strap to secure the remote to bike handlebars or bags, ideal for outdoor activities.
The remote control mounted on a bicycle handlebar.
Figure 5.1: Remote control mounted on a bicycle handlebar.
A hand wearing the wrist-mounted remote control, interacting wirelessly with an Insta360 camera on a tripod.
Figure 5.2: Remote control worn on the wrist, wirelessly connected to a camera.
Side view of the remote control with a wrist strap attached, showing the Type-C charging port.
Figure 5.3: Remote control with wrist strap and Type-C port.

5.3 Pairing with Your Camera

To connect the remote control to your Insta360 camera:

  1. Long press the "Keys to Frequency" button (often labeled as the FM button or a dedicated pairing button) on the remote control to initiate pairing mode.
  2. On your Insta360 camera (X4, Ace Pro, or Go 3S), navigate to the system control center.
  3. Enter "System Settings" > "Bluetooth Remote Controller".
  4. Enable the "Wake on Camera" function if desired.
  5. Select the remote control from the list of available devices on your camera screen and click "Accept" to complete the connection.

Note: The remote control will not work when you are in the mode of controlling multiple cameras simultaneously. Ensure the "Wake on Camera" function is enabled on your camera for full functionality while the remote remains connected.

6. Operation

6.1 Button Functions

Close-up of the remote control showing button labels and their functions: FM button, Fast switching buttons, and Shooting buttons.
Figure 6.1: Remote control buttons and their functions.
  • Shooting Buttons (Red Button):
    • Long press: To hibernate the camera or wake it up.
    • Short press: To take a picture or start/stop recording, wake up the camera when it is sleeping, and make Snapshot recording.
  • Quick Switch Keys (Power Button):
    • Long press: Turn on or off the remote control.
    • Short press: When the remote control is connected to the camera, you can switch the camera shooting mode.
  • Keys to Frequency (FM Button / Pairing Button):
    • Long press: Remote control and camera start pairing.
    • Short press: Wakes up the camera when the remote control is connected to the camera.
    • Cancel pairing when in pairing process.

6.2 Digital Display Information

The remote control features a digital display that provides real-time data and status indicators:

Digital display of the remote control with numbered indicators: 1. Camera Verification Code, 2. Camera micro SD card information, 3. GPS Positioning Status, 4. BT remote control battery level, 5. Link status (one-to-one or one-to-many), 6. Indicator: Charging display or connection status display.
Figure 6.2: Digital display indicators.
  1. Camera Verification Code: Displays the verification code for the connection between the remote control and the camera. Click "Accept" on the camera screen to confirm.
  2. Camera micro SD card information: Displays the number of photos that can be stored on the micro SD card in the camera or the number of hours that can be taken after successful connection to the camera.
  3. GPS Positioning Status: Displays the current GPS signal strength. When the remote control is searching for a GPS signal, it will display accordingly.
  4. BT remote control battery level: Indicates the current battery charge of the remote control.
  5. Link status: Shows whether the remote is connected in a one-to-one or one-to-many configuration.
  6. Indicator: Displays charging status or connection status.

6.3 GPS Data Recording

The integrated multi-mode satellite positioning module accurately records motion data. When the remote control is connected to the camera and the camera app, you can add real-time motion details such as speed and route to your recorded footage.

A cyclist with the remote on their wrist, with a map overlay showing GPS tracking data.
Figure 6.3: GPS tracking functionality in use.

7. Maintenance and Storage

7.1 Cleaning

Wipe the remote control with a dry or slightly damp cloth. Do not immerse in water or use harsh chemicals, as this may damage the device.

7.2 Storage

Store the remote control in a clean, dry place away from children and pets when not in use.

8. Troubleshooting

Problem Possible Cause Solution
Remote control does not turn on. Low battery. Charge the remote control using the provided Type-C charging cable.
Cannot pair with camera. Remote control not in pairing mode; camera Bluetooth off; camera already connected to another device; remote control too far from camera. Ensure remote is in pairing mode (long press FM button). Check camera Bluetooth settings. Disconnect other devices. Bring remote closer to camera (within 25m).
Remote control functions are unresponsive. Not properly connected to camera; camera in multi-camera control mode. Verify successful pairing. Ensure camera is not in multi-camera control mode. Restart both devices and attempt re-pairing.
GPS data not recording. Poor GPS signal; remote not connected to camera app. Move to an open area with clear sky for better GPS signal. Ensure the remote is connected to the camera and the camera app is active.

9. Warranty and Support

For warranty information and technical support, please contact the manufacturer:

Manufacturer: Shenzhen Huanjin Trading Co.,Ltd.

Address: 401 4th Floor, Madame Curie Road, Shenzhen City, Guangdong Province, China

Email: Report@ueb.cn

Tel: 0755-84525519

EU Authorized Representative: VALHALLA TAXE

Address: RUE GENERAL DE REFFYE EGD, 88000 EPINAL 913 439 188 R.C.S. Epinal

Contact Person: Qian LIU

Telephone: +33(0)629986194

Email: valhallatax@outlook.com

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

For detailed compliance information, please refer to the full Product Manual PDF available at Product Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.