1. Introduction
Thank you for purchasing the Sheik Mainland 3MIN Project MUFS-S5 Front Action Figure Stronghold 1/60 Scale Mini Plastic Model Kit. This manual provides essential information for the safe assembly, operation, and maintenance of your model kit. Please read these instructions carefully before beginning assembly and retain this manual for future reference.
2. Safety Information
- Recommended Age: This product is recommended for individuals aged 18 years and older.
- Small Parts Warning: This kit contains small parts which may pose a choking hazard. Keep out of reach of young children and pets.
- Chemical Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Sharp Edges: Exercise caution during assembly as some parts may have sharp edges. Use appropriate tools and wear protective eyewear if necessary.
- Ventilation: If using adhesives or paints (not included), ensure adequate ventilation.
3. Package Contents
Your model kit package typically includes:
- Unassembled plastic model parts (ABS or POK material, depending on variant)
- Instruction sheet/diagrams for assembly
- Optional: Retail box (some variants may be shipped without a box)
Please verify all parts are present and undamaged upon receipt. Contact customer support if any components are missing or faulty.
4. Specifications
| Feature | Detail |
|---|---|
| Item Type | Model |
| Brand Name | Bandai |
| Model Name | MUFS-S5 Stronghold |
| Scale | 1/60 |
| Material Options | ABS (Green, Grey), POK (Black) |
| Recommended Age | 18+ |
| Origin | Mainland China |
| Certification | CE |
| High-concerned chemical | None |
| Approx. Package Dimensions (L x W x H) | 33cm x 28cm x 20cm |
| Approx. Package Weight | 1.0 kg |
5. Assembly and Setup
This product is a mini plastic model kit and requires assembly. Follow the detailed diagrams and instructions provided within your kit packaging for step-by-step guidance. No special tools are typically required beyond standard model kit nippers and a hobby knife, but refer to your kit's specific instructions.
Assembly Overview:
- Carefully remove parts from the runners using appropriate tools.
- Assemble individual sections (e.g., limbs, torso, head) as per the diagrams.
- Connect the assembled sections to form the complete action figure.
- Ensure all joints are securely connected but allow for articulation.
Visual Guides:
6. Operation
Once fully assembled, the MUFS-S5 Stronghold action figure is designed for display and posing. Its articulated joints allow for a wide range of dynamic poses. Gently manipulate the joints to achieve desired positions. Avoid excessive force to prevent damage to the plastic components.
7. Maintenance
- Cleaning: To clean your model, use a soft, dry cloth. For stubborn dust, a slightly damp cloth can be used, followed immediately by a dry cloth.
- Avoid Chemicals: Do not use harsh chemicals, solvents, or abrasive cleaners, as these can damage the plastic and paint (if applied).
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
8. Troubleshooting
- Parts Not Fitting: Double-check the assembly diagrams. Ensure parts are oriented correctly and that no excess plastic (nubs) remains from the runners. Gentle sanding or trimming may be required for a perfect fit.
- Loose Joints: If joints become loose over time, a small amount of clear nail polish or hobby-grade joint tightener can be applied to the ball joint or peg, allowed to dry, and then reassembled.
- Missing Parts: If you discover any missing parts upon opening the kit, please contact the seller with your purchase details.
9. User Tips
- Color Variation: Please note that due to factors such as lighting, display color deviation, and individual perception of color, there may be slight color differences between the product images and the actual item.
- Measurement Accuracy: Manual measurements may have a small error of approximately 1 cm.
- Pre-Assembly Check: Before starting assembly, lay out all parts and compare them with the instruction diagrams to familiarize yourself with the components.
10. Warranty and Support
For any issues, questions, or support needs regarding your Sheik Mainland 3MIN Project MUFS-S5 Front Action Figure Stronghold model kit, please contact the seller directly through your purchase platform. Provide your order number and a clear description of the issue for prompt assistance.
11. Compliance
This product complies with CE certification standards. Please refer to the safety information section for important warnings regarding chemical exposure as required by California Proposition 65.
