1. Introduction
The pinmany RZ-HD56 CAN Bus Decoder is designed to facilitate the integration of aftermarket Android head units with various Honda vehicle models. This device translates CAN Bus data, enabling the Android head unit to communicate effectively with the vehicle's systems, such as steering wheel controls and other essential functions. It ensures seamless operation and access to vehicle information through your new head unit.
2. Specifications
Below are the technical specifications for the RZ-HD56 CAN Bus Decoder:
| Feature | Detail |
|---|---|
| Model Name | RZ-HD56 |
| Special Features | CAN Bus Data Converter |
| Item Weight | 50g |
| Item Size | 73.5mm x 46.5mm x 18.5mm |
| Operating Voltage | +9V to +16V (DC 12V nominal) |
| Brand | pinmany |
| Manufacturer | Raise |
| Item Type | Cables, Adapters & Sockets |
| Material | Black plastic shell |
| Interface | 16-pin and 20-pin PH2.0 connectors |
| Connector Pin Pitch | 2.0mm |
3. Compatibility
3.1. Compatible Android Head Units
The RZ-HD56 CAN Bus Decoder is compatible with Android head units ranging from 7 to 10 inches in screen size.
3.2. Suitable Honda Vehicle Models
This CAN Bus decoder is designed for the following Honda models and years:
- Honda INSPIRE (Supports 360 NAV) 2019-2022
- Honda Accord10 (Turkey) 2020-2022
- Honda CRV 2009-2025
- Honda CRV (Malaysia) 2016-2019
- Honda Odyssey 2015-2024
- Honda Civic 2012-2022
- Honda Civic (Malaysia) 2016-2019
- Honda Civic (Turkey) 2016-2019
- Honda Civic Diesel (Turkey) 2016-2019
- Honda Civic-LPG (Turkey) 2016-2019
- Honda Breeze 2020-2022
- Honda Nbox (Japan) 2017-2023
- Honda Freed (Japan) 2016-2024
- Honda StepWGN (Japan) 2019-2023
- Honda HR-V 2021-2024
- Honda WR-V 2021-2024
- Honda BRV (SEA) 2016-2023
- Honda Pilot 2016-2018
- Honda Elysion 2016-2024
4. Setup Instructions
Proper installation and configuration are crucial for the correct functioning of the CAN Bus decoder. Please follow these steps carefully.
4.1. Pre-Installation Considerations
- The RZ-HD56 decoder operates within a voltage range of +9V to +16V. Voltages outside this range can damage the device.
- This product does not include connection cables. Ensure you have the appropriate 16-pin and 20-pin wire harnesses for your Android head unit and vehicle.
- Wiring must strictly adhere to the pin function descriptions. Incorrect wiring can cause irreversible damage to the CAN Bus decoder.
- If you are unsure about the fitting or wiring, it is highly recommended to seek professional assistance or contact support before proceeding with installation.
4.2. Pin Definition
Refer to the following diagram for the pin definitions of the 16-pin and 20-pin connectors. This information is critical for correct wiring.
| Pin No. | Definition | Pin No. | Definition |
|---|---|---|---|
| 1 | NC | 9 | CP TX+ |
| 2 | NC | 10 | CP TX- |
| 3 | NC | 11 | CP RX+ |
| 4 | NC | 12 | CP RX- |
| 5 | NC | 13 | NC |
| 6 | NC | 14 | NC |
| 7 | NC | 15 | NC |
| 8 | NC | 16 | NC |
| Pin No. | Definition | Pin No. | Definition |
|---|---|---|---|
| 1 | GND | 11 | CAN-H |
| 2 | BATT (+12V) | 12 | CAN-L |
| 3 | BUS+ | 13 | UART-RX |
| 4 | BUS- | 14 | CAM-PWR |
| 5 | ILL-OUT | 15 | NC |
| 6 | SWC-A | 16 | UART-TX |
| 7 | BRAKE-OUT | 17 | SYS-ON |
| 8 | REV-OUT | 18 | DUET-CONT |
| 9 | ACC-IN | 19 | DUET-RX |
| 10 | SWC-B | 20 | DUET-TX |
4.3. Connecting the CAN Bus Decoder
Connect the 16-pin and 20-pin plugs of your wire harness to the corresponding sockets on the CAN Bus Box. Ensure a secure connection for both plugs.
4.4. Setting Up CAN Bus on Android Head Unit
After physical connection, you need to configure the CAN Bus settings on your Android head unit. The exact steps may vary depending on your head unit's manufacturer and software version. Consult your head unit vendor's manual if these instructions differ.
- Enter Settings: Navigate to the main settings menu on your Android head unit.
- Access Factory Settings: Look for a "Factory" or "Factory Settings" option. You may need a password to access this section. Common passwords include 3368, 1617, 8317, 8888. If these do not work, contact your Android radio seller for the correct password.
- Enter CAN Bus Settings: Within the factory settings, find the "CAN Bus Settings" or similar option.
- Select Manufacturer and Model:
- Select "Raise" as the CAN Bus Box manufacturer.
- Choose the correct Honda car model and year from the list provided.
- Save and Reboot: Save your settings and reboot the Android head unit for changes to take effect.
5. Operating Instructions
Once the RZ-HD56 CAN Bus Decoder is correctly installed and configured, your Android head unit should seamlessly integrate with your vehicle's CAN Bus system. This enables features such as:
- Steering Wheel Control (SWC) functionality.
- Display of vehicle information (e.g., door status, climate control, parking sensors) on the head unit, if supported by your specific vehicle and head unit model.
- Automatic detection of reverse gear for camera activation (REV-OUT).
- Illumination control (ILL-OUT).
Specific operational details for these features will depend on your Android head unit's software and the vehicle's original capabilities. Refer to your head unit's user manual for detailed operation of integrated features.
6. Maintenance
The RZ-HD56 CAN Bus Decoder is a low-maintenance device. To ensure its longevity and optimal performance:
- Keep the device free from dust and moisture.
- Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
- Do not attempt to open the device casing, as this may void any warranty and could damage internal components.
- Ensure all connections remain secure and free from corrosion.
7. Troubleshooting
If you encounter issues with your RZ-HD56 CAN Bus Decoder, consider the following troubleshooting steps:
- No Functionality / Incorrect Functionality:
- Verify all wiring connections are correct and secure, referring to the pin definition diagram (Figure 6).
- Check the operating voltage of your vehicle's electrical system to ensure it is within the +9V to +16V range.
- Confirm that the CAN Bus settings on your Android head unit are correctly configured, including the selected manufacturer ("Raise") and car model/year (Figure 9).
- Ensure your Android head unit has an 8-pin connector for serial communication, as required for compatibility.
- Head Unit Not Recognizing CAN Bus:
- Reboot the Android head unit after making any changes to the CAN Bus settings.
- If prompted for a factory settings password, ensure you are using the correct one provided by your head unit vendor.
- Confirm that the CAN Bus box is compatible with your specific Android head unit model.
- Intermittent Issues:
- Check for loose connections or damaged wires.
- Ensure the decoder is not exposed to excessive heat or vibration.
If problems persist after following these steps, please contact customer support for further assistance.
8. User Tips
- Professional Installation Recommended: Due to the complexity of automotive wiring and CAN Bus systems, professional installation is highly recommended to avoid damage to the decoder or vehicle electronics.
- Verify Head Unit Compatibility: Before purchase and installation, ensure your Android head unit has the necessary 8-pin connector for serial communication with the CAN Bus decoder.
- Double-Check Wiring: Always cross-reference your vehicle's wiring diagram with the RZ-HD56's pin definitions to prevent incorrect connections.
9. Warranty and Support
pinmany is committed to providing reliable products and customer satisfaction. For any questions or issues regarding your RZ-HD56 CAN Bus Decoder, please contact our customer support team.
- Customer Support: If you have any questions about the order or product, please contact us directly. We are dedicated to resolving any issues to your satisfaction.
- Returns: We offer a free return guarantee program in many countries. If the product is displayed with the "Free Return" service logo, you may return the goods within 15 days of receipt if you are dissatisfied. Please check the specific terms and conditions for your region.
