Hcalory TC2-2S

Contents

Hcalory 8KW Diesel Heater TC2-2S User Manual

Model: TC2-2S | Brand: Hcalory

1. Introduction

Thank you for choosing the Hcalory 8KW Diesel Heater TC2-2S. This portable parking diesel air heater is designed to provide efficient and reliable heating for various applications, including vehicles, RVs, and small cabins. Featuring a compact toolbox design, multi-voltage compatibility (12V/24V DC, 100~240V AC), and smart app control, it offers convenience and comfort in cold environments. Please read this manual thoroughly before installation and operation to ensure safe and optimal performance.

Hcalory 8KW Diesel Heater overview, showing the main unit, LCD control panel, power adapter, and remote control.

Figure 1: Hcalory 8KW Diesel Heater with included accessories.

2. Safety Information

Always prioritize safety when operating the diesel heater. Failure to follow safety instructions can result in property damage, injury, or death.

  • Ensure adequate ventilation when operating the heater to prevent carbon monoxide buildup.
  • Do not block the air intake or exhaust outlets.
  • Keep flammable materials away from the heater.
  • Regularly inspect the fuel lines and connections for leaks.
  • Do not operate the heater if any part is damaged or malfunctioning.
  • Always use diesel fuel as specified.
  • The heater is equipped with multiple security protections, including:
    • Over-heating Protection
    • Short-circuit Protection
    • Reverse Connection Protection
    • Over Voltage Protection
  • If using the optional Smart Remote Control 2.0, be aware of its CO sniffing capabilities, but always ensure proper ventilation.
Diagram detailing multiple security protections: Over-heating Protection, Short-circuit Protection, Reverse Connection Protection, and Over Voltage Protection.

Figure 2: Built-in security protection features.

3. Package Contents

Please check the package contents against the list below. If any items are missing or damaged, contact your seller immediately.

  • 1 x Air Diesel Heater (Main Unit)
  • 1 x Remote Control
  • 1 x LCD Switch Control Panel
  • 1 x Controller Extension Cord
  • 1 x AC-DC Power Adapter (100~240V)
  • 1 x Wire Harness
  • 1 x Exhaust Silencer
  • 1 x Exhaust Pipe
  • 1 x Intake Pipe
  • 1 x Air Outlet Pipe
  • 1 x Air Filter
  • 1 x Vents
  • 1 x User Manual
  • 1 x Fastener Accessories Set
Detailed diagram of all included components for the diesel air heater, showing the main unit, pipes, wiring, and accessories.

Figure 3: All components included in the package.

4. Product Overview

The Hcalory TC2-2S diesel heater features a robust and portable design, making it easy to transport and set up in various locations. Its compact toolbox form factor integrates the fuel tank and main heating components.

4.1 Main Unit

The main unit houses the combustion chamber, heat exchanger, and fuel pump. It includes a built-in 5L fuel tank for extended operation.

4.2 Control Interfaces

  • LCD Control Panel: Provides real-time status, temperature display, and allows for direct control of settings.
  • Remote Control: Offers convenient wireless operation for basic functions like power on/off and temperature adjustment.
  • HCALORY App: Connects via Bluetooth for advanced control, scheduling, and monitoring from your smartphone.

4.3 Dimensions

The portable design allows for easy movement. Approximate dimensions are:

  • Length: 16.54 inches (42 cm)
  • Width: 10.63 inches (27 cm)
  • Height: 11.81 inches (30 cm)
Image highlighting the portable design of the heater, with dimensions (16.54 inches length, 10.63 inches width, 11.81 inches height) indicated.

Figure 4: Portable design with key dimensions.

5. Setup Instructions

Follow these steps for initial setup and installation:

5.1 Placement and Ventilation

  • Place the heater on a stable, non-flammable surface.
  • Ensure there is sufficient clearance around the heater for proper airflow and heat dissipation.
  • Always ensure adequate ventilation to prevent carbon monoxide buildup. Do not operate in completely sealed spaces.

5.2 Connecting Exhaust and Intake Pipes

  • Attach the intake pipe to the designated intake port on the heater.
  • Connect the exhaust pipe to the exhaust port. Secure it with the provided clamps.
  • Install the exhaust silencer onto the exhaust pipe if desired for reduced noise.
  • Ensure both pipes are routed safely, away from flammable materials and in a manner that allows for proper air intake and exhaust expulsion to the outside environment.
Heater with exhaust and intake pipes connected.

Figure 5: Exhaust and intake pipe connections.

5.3 Connecting Air Outlet Pipe and Vents

  • Attach the air outlet pipe to the hot air outlet of the heater.
  • Install the vents at the desired location for heat distribution.
Heater with air outlet pipe and vent connected.

Figure 6: Air outlet pipe and vent installation.

5.4 Electrical Connection

  • Connect the wire harness to the heater's power input.
  • For AC power (100~240V), use the included AC-DC power adapter. Plug the adapter into a standard household outlet.
  • For DC power (12V/24V), connect the wire harness directly to your vehicle's or battery's power source, ensuring correct polarity.
  • Connect the LCD switch control panel using the controller extension cord.
Image of the AC-DC power adapter and the wiring harness.

Figure 7: AC-DC power adapter and wiring harness.

5.5 Fuel Filling

  • Open the fuel tank cap.
  • Carefully fill the 5L built-in tank with clean diesel fuel. Do not overfill.
  • Ensure the cap is securely closed after filling.

6. Operating Instructions

6.1 Power On/Off

  • To Power On: Press the power button on the LCD control panel or remote control. The heater will initiate its startup sequence.
  • To Power Off: Press and hold the power button until the heater begins its shutdown cycle. Allow the heater to complete its cool-down process before disconnecting power.

6.2 Using the LCD Control Panel and Remote Control

  • The LCD panel displays current temperature, operating mode, and other relevant information.
  • Use the buttons on the LCD panel or remote to adjust the target temperature, switch modes, and access settings.
Close-up of the LCD switch and remote control, showing their buttons and display.

Figure 8: LCD Control Panel and Remote Control.

6.3 HCALORY App Control

The HCALORY app provides comprehensive control over your heater via Bluetooth.

  • Bluetooth Connection: Ensure Bluetooth is enabled on your smartphone and the heater is powered on. Open the HCALORY app and follow the on-screen instructions to pair with your heater.
  • Temperature Setting: Adjust the desired temperature remotely.
  • Multiple Timing Groups: Set schedules for the heater to turn on and off automatically.
  • Gear Setting: Control the fan speed and heating intensity.
  • Altitude Mode: Activate or monitor the automatic altitude adjustment feature.
  • Auto Start-Stop: Enable the intelligent auto start-stop function for optimized fuel consumption.
  • Blowing Mode: Use the heater for air circulation without heating.
Image demonstrating multi-function smart APP control, with icons for temperature setting, multiple timing groups, gear setting, altitude mode, auto start-stop, and blowing mode.

Figure 9: HCALORY App control features.

6.4 Automatic Plateau Mode

The heater features an intelligent control panel that automatically adjusts the air and diesel mixing ratio to optimize performance at altitudes up to 18,000 ft (approximately 5.0 KM). This ensures reliable heating across varying terrains without manual adjustments.

Image illustrating the Automatic Plateau Mode, showing intelligent adjustment of air and diesel mixing ratio for altitudes up to 5.0 KM.

Figure 10: Automatic Plateau Mode for high-altitude operation.

7. Maintenance

Regular maintenance ensures the longevity and efficient operation of your Hcalory diesel heater.

7.1 General Cleaning

  • Wipe the exterior of the heater with a damp cloth. Do not use abrasive cleaners or solvents.
  • Ensure all air inlets and outlets are free from dust and debris.

7.2 Air Filter Maintenance

  • Periodically check the air filter for cleanliness.
  • Clean or replace the air filter as needed to maintain optimal airflow and prevent dust from entering the combustion chamber.

7.3 Fuel System Checks

  • Inspect fuel lines and connections for any signs of wear, cracks, or leaks.
  • Ensure the fuel tank cap is always securely fastened.

8. Troubleshooting

If you encounter issues with your heater, refer to the following common troubleshooting steps:

  • Heater not starting:
    • Check power connection and ensure sufficient voltage (12V/24V DC or 100~240V AC).
    • Verify there is enough diesel fuel in the tank.
    • Ensure all connections (electrical, fuel, air pipes) are secure.
  • No heat or insufficient heat:
    • Check the set temperature on the control panel or app.
    • Ensure air intake and exhaust are not blocked.
    • Clean the air filter if it's dirty.
  • Unusual noise:
    • Inspect for loose components or obstructions in the fan or exhaust system.
    • Ensure the heater is placed on a stable surface.
  • Error codes on LCD:
    • Refer to the specific error code displayed on the LCD panel. Consult the full manual (if available) or contact customer support for detailed explanations and solutions.

If the problem persists after troubleshooting, please contact Hcalory customer support.

9. Specifications

Attribute Value
Brand NameHcalory
ModelTC2S
Power8KW
Voltage12V / 24V DC / 100~240V AC
MaterialMetal and Plastic
Fuel Tank Capacity (Built-in)5L
Fuel TypeDiesel
Item Length54cm (21.26 inches)
Item Width53cm (20.87 inches)
Item Height27cm (10.63 inches)
Item Diameter7.5cm (2.95 inches)
Item Weight11.6kg (25.57 lbs)
Package Dimensions48cm x 32cm x 41cm (18.9 x 12.6 x 16.1 inches)
Package Weight12.6kg (27.78 lbs)
External Testing CertificationCE
CertificationCE, RoHS, FCC
Operating Temperature-40℃~40℃ (-40℉~104℉)
Bluetooth APP ControlSupported
Remote ControlSupported
LCD Panel ControlSupported
AC AdapterIncluded (100~240V)
Altitude ModeAutomatically Adjusts (up to 18,000 ft / 5.0 KM)
Diesel Consumption0.12 L/h - 0.36 L/h
Special FeaturesAutomatic Start and Stop
Switch TypeLCD Switch
1.5M Switch Extension CableIncluded

10. User Tips

  • Pre-fill Fuel Lines: For the first use or after running out of fuel, it may take a few minutes for the fuel pump to prime. You might need to run the heater a couple of times to ensure the fuel lines are fully primed.
  • Optimal Placement: To maximize heating efficiency and minimize noise, consider placing the heater outside your tent or vehicle and routing the hot air duct inside.
  • App Control Convenience: Utilize the HCALORY app for scheduling heating times, especially useful for pre-warming your space before you arrive.
  • Altitude Awareness: While the heater has an automatic plateau mode, be mindful of extreme altitude changes and ensure proper exhaust routing to avoid performance issues.
  • Silent Operation: The silent fuel pump significantly reduces ticking noise. For even quieter operation, ensure the heater is on a stable, level surface to prevent vibrations.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the Hcalory customer service department. Keep your purchase receipt as proof of purchase.

Note: The Smart Remote Control 2.0 with wireless temperature sensing and CO sniffing is an upgradable feature and is not included with the standard package. It must be purchased separately if desired.

Image showing the upgradable Smart Remote Control 2.0 with wireless temperature sensing and CO sniffing capabilities, including a CO port detecting feature. Note: Remote Control 2.0 is sold separately.

Figure 11: Optional Smart Remote Control 2.0 (sold separately).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.