1. Introduction
The CONENTOOL MK16-G is a high-precision 16-line green laser level designed for various leveling and alignment tasks. It projects two horizontal and two vertical 360° laser lines, offering comprehensive coverage for floor, ceiling, and wall applications. Featuring a high-visibility green beam, multiple operating modes, and a robust design, this tool ensures accuracy and efficiency in your projects.
2. Package Contents
Please check the box contents upon receipt to ensure all items are present and undamaged:
- 1 x Green Laser Level (MK16-G)
- 2 x 4500mAh Lithium Batteries
- 1 x USB-C Charging Cable
- 1 x Magnetic Bracket
- 1 x Fine-Tuning Base
- 1 x Lifting Base Stand
- 1 x Laser Target Plate
- 1 x Remote Control
- 1 x Tripod Thread Adapter
- 1 x User Manual
- 1 x Storage Bag
3. Product Overview
The CONENTOOL MK16-G laser level features a durable design with intuitive controls and versatile functionality.
Key Features:
- 4D Cross-Line Laser System: Projects two 360° horizontal and two 360° vertical green laser lines.
- High-Visibility Green Beam: Up to 4 times brighter than red lasers, with a fine 1.2mm line for precision.
- Multiple Operating Modes: Self-leveling, Manual/Tilt mode, and Pulse mode for outdoor use.
- Dual Rechargeable Batteries: Two 4500mAh lithium batteries provide extended runtime.
- IP54 Rating: Waterproof and dustproof for reliable performance in various work environments.
- Versatile Mounting: Compatible with tripods, magnetic brackets, and lifting bases.
- Remote Control: Conveniently switch modes and lines from a distance.
4. Setup
4.1 Battery Installation and Charging
- Ensure the laser level is powered off.
- Locate the battery compartment on the side of the device.
- Insert one of the provided 4500mAh lithium batteries, ensuring correct polarity.
- To charge, connect the USB-C cable to the charging port on the battery or the device, and then to a suitable USB power adapter (not included). The battery indicator on the device will show charging status. A full charge takes approximately 3-5 hours.
4.2 Mounting Options
The laser level offers several versatile mounting options:
- Tripod Mounting: Use the 1/4"-20 female mount on the bottom of the device to attach it to a standard tripod or the included mini-tripod/fine-tuning base.
- Magnetic Bracket: Attach the magnetic L-shaped bracket to metallic surfaces. The laser level can then be mounted onto the bracket for wall applications. The fine adjustment knob on the bracket allows for precise positioning.
- Lifting Base Stand: Use the included lifting base stand for free adjustment of height on flat surfaces. Turn the lift knob for up and down fine adjustment.
5. Operating Instructions
5.1 Power On/Off
Slide the red ON/OFF switch to turn the device on or off.
5.2 Self-Leveling Mode
When the device is powered on and the pendulum is unlocked (switch in the 'ON' position), it will automatically enter self-leveling mode. The laser will self-level within ±3°. If the device is beyond this range, the laser beam will blink continuously at 2Hz to indicate it cannot self-level.
5.3 Manual/Tilt Mode
To activate Manual/Tilt mode, ensure the power switch is in the 'OFF' position (pendulum locked). Then, press and hold either the 'H' or 'V' button for approximately 3 seconds. In this mode, the laser tool can be placed at any angle for alignment. The laser beam will blink every 3-5 seconds to remind you that it is not self-leveling.
5.4 Laser Line Selection
Press the 'H' button to cycle through horizontal laser lines. Press the 'V' button to cycle through vertical laser lines. Each line can be selected individually.
5.5 Brightness Adjustment
Long-press the 'H' button to increase the brightness of the laser lines. Long-press the 'V' button to decrease the brightness of the laser lines.
5.6 Pulse Mode (Outdoor Mode)
For use in bright light conditions or outdoors, activate Pulse mode by pressing the button with the asterisk/sun icon for 3 seconds. In Pulse mode, the laser works with a receiver (not included) to extend the working range up to 30 meters.
5.7 Remote Control Operation
The included remote control allows for convenient switching of modes and lines without needing to touch the device.
- Press 'H/+' on the remote to switch horizontal lines or raise brightness.
- Press 'V/-' on the remote to switch vertical lines or lower brightness.
- Press '*/' on the remote to activate Manual mode or Outdoor mode.
5.8 Applications
The CONENTOOL MK16-G is suitable for a wide range of leveling and alignment requirements, including:
- Tile installation
- Wall decoration
- Cabinet installation
- Picture hanging
- Staircase layout
- General construction and renovation tasks
6. Maintenance
- Cleaning: Regularly clean the laser windows and the device body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the laser level in its storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the pendulum is locked (power switch in 'OFF' position) during storage and transport.
- Battery Care: Charge the batteries regularly, even if not in use, to maintain their lifespan. Avoid fully discharging the batteries for extended periods.
- Water and Dust: While the device is IP54 rated for water and dust resistance, avoid prolonged exposure to harsh conditions.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Laser lines are blinking rapidly (2Hz) in self-leveling mode. | The device is tilted beyond its self-leveling range (4°±1°). | Place the laser level on a more level surface or adjust its position until it is within the self-leveling range. |
| Laser lines are blinking every 3-5 seconds. | The device is in Manual/Tilt mode. | This is normal behavior for Manual/Tilt mode. If you need self-leveling, unlock the pendulum and ensure the device is within its self-leveling range. |
| Laser lines are dim or not visible outdoors/in bright light. | Not in Pulse mode or no laser receiver is being used. | Activate Pulse mode (long press asterisk/sun button) and use a compatible laser receiver (not included) for enhanced visibility and extended range. |
| Device does not power on. | Low battery or incorrect battery installation. | Check battery charge level and ensure batteries are correctly installed. Recharge if necessary. |
| Remote control not working. | Remote battery low or out of range. | Ensure the remote control is within 16 ft of the laser level. Replace the remote control battery if needed. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | CONENTOOL |
| Model Number | MK16-G |
| Measurement Model | 16 Lines (4x360° Vertical & Horizontal) |
| Laser Wavelength | 635nM |
| Beam Color | Green |
| Precision | ±1.5 mm at 7m |
| Working Distance | 10~30M (up to 30m with receiver in Pulse mode) |
| Automatic Leveling Range | 4°±1° |
| Alarm Degree | 3°±1° |
| Laser Class | Class 2, <1mW |
| Battery Capacity | 2 x 4500mAh Lithium Batteries |
| Full Charge Time | 3~5 hours |
| Working Time | 6~8 hours (continuous use) |
| Working Voltage | 110~220V (charger input) |
| IP Rating | IP54 (Waterproof & Dustproof) |
| Size | 23.50cm*20.00cm*16.00cm |
| Gross Weight | 1.63kg |
| Certification | CE, WEEE |
| Smart Device | Yes |
| Origin | Mainland China |
9. User Tips
- For optimal visibility in bright outdoor conditions, always use the Pulse mode in conjunction with a compatible laser receiver.
- When working on uneven surfaces, utilize the lifting base stand for precise height adjustments to ensure accurate leveling.
- To conserve battery life, turn off unused laser lines using the 'H' and 'V' buttons, or adjust brightness to the lowest effective setting.
- Always lock the pendulum (power switch to 'OFF') before transporting the device to prevent damage to the internal components.
10. Safety Information
WARNING: This is a Class 2 laser product. Do not stare directly into the laser beam. Avoid direct eye exposure.
- Always operate the laser level in a safe manner, following all instructions in this manual.
- Do not attempt to disassemble or modify the laser level. This can cause hazardous laser radiation exposure and will void the warranty.
- Keep the device out of reach of children and unauthorized personnel.
- Ensure the work area is clear of obstacles and potential hazards.
- Use only the specified batteries and charging cable.
- Do not operate the laser level in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
11. Warranty and Support
CONENTOOL products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official CONENTOOL website. Please retain your proof of purchase for warranty claims.
12. Product Demonstration Video
Watch this video for a visual guide on the features and operation of the CONENTOOL MK16-G Laser Level:
