MACHENIKE G3 V2 PC Gaming Controller User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your MACHENIKE G3 V2 PC Gaming Controller. Please read this manual thoroughly before use and keep it for future reference to ensure optimal performance and longevity of your device.

The MACHENIKE G3 V2 is a versatile gaming controller designed for multi-platform compatibility, featuring Hall Effect joysticks and triggers, customizable buttons, and multiple connectivity options.

2. Package Contents

Please check and confirm that all the following accessories are included in your package:

• 1 x MACHENIKE G3 V2 Controller
• 1 x Controller Stand (Optional)
• 1 x Joystick Torque Tab (Optional)
• 1 x USB Charging Cable
• 1 x User Manual, Certificate Of Compliance
• 1 x 2.4G Receiver

3. Product Overview & Button Layout

Familiarize yourself with the controller's layout and functions:

Front View

• BACK button (“-”)
• HOME button
• Indicator light
• START button (“+”)
• Left Joystick (LS/L3)
• Directional Pad
• ABXY buttons
• Right Joystick (RS/R3)
• TURBO button
• FN button

Top & Back View

• Bumper RB (R1)
• Bumper LB (L1)
• Trigger RT (R2)
• Trigger LT (L2)
• M1 Programming Button
• M2 Programming Button

4. Connectivity

The MACHENIKE G3 V2 controller supports Wired, 2.4G Wireless, and Bluetooth connectivity. Before establishing a wireless connection, ensure to switch to the correct wireless mode using the combination keys.

Wireless Connection

Hold down the specified combination keys until the indicator light flashes rapidly. The controller will enter pairing mode, allowing you to connect to the corresponding device.

Wired Connection

With the controller powered off, directly connect the device and the controller using the data cable to use.

Controller Sleep/Reconnect

In wireless mode (Bluetooth/2.4G), if there's no activity for 10 minutes, the controller will automatically power off. Press the HOME button to wake up the controller, and it will automatically reconnect to the previous device.

Turn off the controller

When using wireless connection (Bluetooth/2.4G), press and hold the HOME button for more than 5 seconds to shut down the controller.

5. Controller Functions

Combination Buttons

When using combination keys, it is essential to follow the specified button sequence; otherwise, switching may not work correctly.

Macro Programming

The controller features 2 programmable macro buttons (M1, M2).

Record Operations

1. With the controller connected, press FN + M1/M2 simultaneously. The joystick light ring will breathe, indicating recording mode. If it doesn't flash, repeat the operation.
2. Input the desired function keys in sequence.
3. After setup, briefly press the corresponding macro key (M1/M2). The decorative lights will stop flashing and return to the previous mode, indicating setup completion.

Clear Macro (Example with M1)

1. With the controller on, press FN + M1 simultaneously. The joystick light ring will breathe.
2. Press M1 again. The decorative lights will stop flashing, clearing the custom macro function for M1.

TURBO Function

The TURBO function allows for continuous rapid input of button presses.

• Supported TURBO buttons: A/B/X/Y/LB/LT/RB/RT
• Manual TURBO Function: When enabled, you need to manually hold down the button to activate continuous fire.
• Automatic TURBO Function: When enabled, the button will continuously fire without needing to be held down.

To enable/disable TURBO function:

1. Press and hold TURBO + [Target Button] and then release it. The button activates manual continuous fire.
2. Press TURBO + [Target Button] again. The button activates automatic continuous fire.
3. Press TURBO + [Target Button] once more to disable the continuous fire function.

Note: When buttons are in continuous fire mode, the Home button indicator light will flash in synchronization.

6. Battery Information

The controller is equipped with a 1000mAh high-capacity battery for extended playtime.

Check Current Battery Level

Press [FN] + [TURBO] simultaneously to display the current battery level via the LOGO light:

• ≥75%: LOGO light flashes red 4 times
• 50%-75%: LOGO light flashes red 3 times
• 25%-50%: LOGO light flashes red 2 times
• ≤25%: LOGO light flashes red 1 time

Low Power Indicator

The LOGO light will stay red when the battery is low.

Charging Indicator

• When charging, the indicator light breathes.
• After fully charged, the indicator light is always blue.

Attention! Do not use a power source exceeding 5V == 1A to charge the controller to avoid damage to the device.

7. Calibration

Proper calibration ensures accurate input from joysticks and triggers. During calibration, gently rotate the joystick and press the trigger to the end; otherwise, issues like incomplete range may occur.

Joystick Calibration

1. With the controller powered off, press [☑] + [B] + [HOME] simultaneously to start (LED ring flashes).
2. Slowly rotate both joysticks to their limits for 3 full rotations.
3. Press [≡] once to complete calibration and automatically power off.

Trigger Calibration

1. With the controller powered off, press [☑] + [Y] + [HOME] simultaneously to start (LED ring flashes).
2. Press both triggers to the end 3 times each.
3. Press [≡] once to complete calibration and automatically power off.

Motion Sensing Function (Optional)

Motion Sensing Calibration

1. Simultaneously press the [☑] button + [A] button + [HOME] button to activate the calibration function.
2. Place the controller flat on the tabletop.
3. Press the [≡] button to initiate automatic calibration.
4. Wait for the controller to automatically power off. This indicates that the calibration process has been completed.

Motion-Sensing Controls

• Press FN + L3 to map motion controls to the left joystick.
• Press FN + R3 to map motion controls to the right joystick.

8. APP Support - Keylinker 2.0

For more customized functions and settings, you can use the Keylinker app. It offers smart, hassle-free quick setup with no manual pairing required.

APP Download for Android/HarmonyOS/iOS

1. Download the app and related firmware updates from the Machenike official website: https://global.machenike.com/
2. Alternatively, scan the QR code below using your browser to access the download page.
3. For HarmonyOS, please download the Android version of the app.

Note: Harmony 5.0 and above do not support Keylinker.

Connection Steps

1. After correctly installing the Keylinker software on your phone, confirm the relevant permissions prompts that appear when you first start the app.
2. Start the controller in any mode, and you can find "G3V2 _APP" on the Keylinker app's main page.
3. Click "G3V2_APP" to connect and enter the customization interface.

Note: This function does not require the controller to connect to the mobile phone via Bluetooth. Follow the above operations to open Keylinker to change the controller settings.

9. Reset

If the controller is unresponsive or unable to recognize, try the following steps:

1. Unplug the USB cable and plug it back in.
2. Move the connection toggle switch to use another mode.
3. If the issue persists, use a pin to poke the reset hole on the back of the controller to perform a hard reset.
4. Check the compatibility of your operating system (OS) and device.

If the problem still cannot be resolved, please contact customer service for assistance.

10. Specifications

Key technical specifications for the MACHENIKE G3 V2 controller:

General Specifications:

• Input Power: 5.0V == 500mA
• Use Distance Range: ≤ 10M
• Compatible Platforms: PC, NS (Nintendo Switch), Tablet, Mobile, Car System, Steam, Android, iOS
• Trigger Button Type: Hall-Linear
• Joystick Sensor Module Brand/Type: Hall Effect
• D-pad Switch Type: Membrane (G3V2) / Conductive Rubber (G3 Pro)
• ABXY Switch Type: Membrane (G3V2) / Conductive Rubber (G3 Pro)
• Bumpers Switch Type: Membrane (G3V2) / Tactile Switch (G3 Pro)
• Wear-resistant joysticks: Yes
• RGB lighting joysticks: Yes
• Support Software configuration: Yes
• Certification: CE, EAC, FCC, RoHS

11. Battery Safety Guidelines

CAUTION: Failing to follow all safety guidelines may result in product damage, explosion, fire, and/or electric shock.

• DO NOT replace the battery with a different model.
• DO NOT use this product if the battery shows signs of damage including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
• DO NOT touch the battery if material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
• DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating conditions.
• DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
• DO NOT impact, bend, alter, disassemble, or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful.

12. Environmental Information & Recycling

MACHENIKE advocates for environmentally friendly consumption. Users are encouraged to comply with national waste electrical and electronic product recycling laws and regulations. Please hand over this product to a qualified recycling vendor when it is no longer needed, to reduce waste and protect the environment.

Hazardous Substances in Products

This table indicates the presence of hazardous substances in the product, in accordance with SJ/T 11364 regulations.

O: Indicates that the concentration of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.

X: Indicates that the concentration of the hazardous substance in at least one homogeneous material of the component exceeds the limit specified in GB/T 26572.

Due to current international and domestic industry technical levels, some components of this product contain restricted substances. During the environmental protection use period, these substances will not leak or precipitate, nor will they affect consumer health during normal use. Printed Circuit Board Assembly includes printed circuit boards and their components, electronic components, etc. Depending on the product model, the product you purchased may not contain all components.

In China, electrical and electronic products sold must be marked with this logo. The number inside the logo represents the environmental protection use period of the product under normal use conditions.

13. Warranty and Support

Warranty Statement

Under the premise of correct use according to this technical manual, this product enjoys a one-year free warranty from the date of purchase. Warranty service is provided through factory repair. For repair requests, please scan the after-sales QR code on the product packaging box.

Exclusions from Free Warranty Service

The company will not provide free warranty service for failures caused by the user's personal reasons, including but not limited to:

• Unauthorized disassembly, modification, or alteration of the product.
• Damage caused by accidental drops, impacts, liquid ingress, or incompatible power supply specifications during use or transportation.
• Failures due to lack of reasonable maintenance.
• Failure to operate according to the instructions in the user manual.
• Failures or damage caused by third-party products, services, or actions.

When requesting free warranty service, you must provide a clear, complete, and accurate sales invoice and warranty card. When purchasing the product, you can request the seller to provide the aforementioned sales invoice and warranty card.

Repair services outside the warranty scope will be charged according to regulations.

Official Website

For updates to product firmware and further support, please visit the official Machenike website: https://global.machenike.com/

You can also refer to the original user manual PDF for additional details: User manual (PDF)

14. User Tips

• Hall Effect: The MACHENIKE G3 V2 features Hall Effect joysticks and Hall-Linear triggers, providing precise and durable input without drift.
• App Customization: Utilize the Keylinker 2.0 app for advanced customization of button mappings, joystick dead zones, and lighting effects to tailor your gaming experience.
• Polling Rate: For the lowest latency and most responsive gameplay, use the wired or 2.4G wireless connection modes, both offering a 1000Hz polling rate.

15. Frequently Asked Questions (FAQ)

Q: Does this controller work on the PS5?

A: No, the MACHENIKE G3 V2 controller is compatible with Nintendo Switch, PC, Android, iOS, and Steam platforms. It does not support PS5.

Q: Does it have Hall effect in the triggers?

A: Yes, the controller features Hall-Linear triggers, providing precise and durable input.