1. Introduction
The Pinmany RZ-FD69 is a CAN Bus Data Converter designed to integrate aftermarket Android head units with the existing CAN Bus system in various Ford vehicles. This decoder facilitates communication between your new Android car radio and the vehicle's electronic systems, ensuring functions like steering wheel controls and other vehicle data are properly transmitted.
Figure 1: Pinmany RZ-FD69 CAN Bus Decoder
2. Specifications
Below are the detailed specifications for the RZ-FD69 CAN Bus Decoder:
| Feature | Description |
|---|---|
| Model Name | RZ-FD69 |
| Brand Name | Pinmany |
| Manufacturer | RAISE |
| Item Type | Cables, Adapters & Sockets |
| Special Features | CAN Bus Data Converter |
| Operating Voltage | 12 V (Range: +9V~+16V) |
| Interface | 16-PIN, 20-PIN (2.0mm pitch) |
| Item Size | 73.5mm x 46.5mm x 18.5mm |
| Item Weight | 50g |
| Material | Black plastic shell |
| Origin | Mainland China |
Figure 2: Product Dimensions
3. Compatibility
3.1. Compatible Android Head Units
This CAN Bus decoder is compatible with 7, 8, 9, and 10-inch Android head units. It requires an Android head unit with 8-pin connectors and serial communication capabilities (TX/RX).
Figure 3: Compatible Android Head Unit Sizes
3.2. Suitable Vehicle Models (Ford)
The RZ-FD69 CAN Bus Decoder is designed for the following Ford vehicle models and years:
- Ford Explorer: 2006-2010
- Ford Edge: 2008-2010
- Ford Fusion: 2006-2012
- Ford Escape: 2009-2012
- Ford F150: 2009-2018
- Ford F250: 2009-2014
- Ford F350: 2004-2008
- Ford F450: 2017-2022
- Ford E350: 2009-2012
- Ford Expedition: 2007-2019
- Ford Flex: 2013-2018
- Ford Taurus: 2013-2014
- Ford Navigator: 2006-2010
Figure 4: Suitable Vehicle Models
4. Installation
Important Pre-Installation Notes:
- This product does not include cables. If you do not have the necessary cables, it is recommended to purchase a CAN Bus adapter with cables.
- The CAN Bus box is only compatible with Android head units that have 8-pin connectors and support serial communication (TX/RX).
- Wiring requires certain professional knowledge. Please strictly follow the provided pin definition chart for wiring. Improper wiring can cause damage to the CAN Bus decoder.
- Ensure the operating voltage is within +9V to +16V. Voltages outside this range can damage the decoder.
- If you are unsure about fitting, please contact support before purchase.
Figure 5: Incompatible Cable Types (Cables are not included)
Figure 6: Required 8-pin connector for Android Head Unit
4.1. Pin Definition
Refer to the following pin definition for correct wiring of the 16-pin and 20-pin connectors:
Figure 7: Pin Definition for 16-pin and 20-pin Connectors
16-pin Connector:
- 1. Stereo RIN-
- 2. Stereo RIN+
- 3. Stereo LIN-
- 4. Stereo LIN+
- 5. MONO+
- 6. NC (Not Connected)
- 7. NC (Not Connected)
- 8. MONO-
- 9. NC (Not Connected)
- 10. AUX LOUT
- 11. AUX GND
- 12. AUX ROUT
- 13. NC (Not Connected)
- 14. NC (Not Connected)
- 15. NC (Not Connected)
- 16. NC (Not Connected)
20-pin Connector:
- 1. GND
- 2. BATT (+12V)
- 3. CAN-H
- 4. CAN-L
- 5. NC (Not Connected)
- 6. ACC-OUT
- 7. BRAKE-OUT
- 8. REV-OUT
- 9. SWC1
- 10. ILL-OUT
- 11. SWC2
- 12. NC (Not Connected)
- 13. UART-RX
- 14. NC/AD1
- 15. NC (Not Connected)
- 16. UART-TX
- 17. NC (Not Connected)
- 18. NC (Not Connected)
- 19. NC/AD2
- 20. NC/ACC-IN
4.2. Connecting the Cable Adapter
After identifying the correct pins, connect the 16-pin and 20-pin plugs of your wire harness to the corresponding sockets on the CAN Bus Box.
Figure 8: Cable Adapter Connection
5. Setting Up CAN Bus on Android Head Unit
The setup process on the Android head unit may vary depending on the specific model and manufacturer. The following steps provide a general guide. If you encounter difficulties, please consult your head unit vendor's manual or support.
5.1. Enter Settings and Factory Settings
- From the Android head unit's home screen, navigate to the 'Settings' menu.
- Look for an option like 'Car Settings' or 'Factory Settings'.
- You may be prompted for a factory password. Common passwords include: 3368, 1617, 8317, 8888. If these do not work, contact the seller of your Android radio for the correct password.
Figure 9: Android Head Unit Setup Steps
5.2. Select CAN Bus Box Manufacturer and Car Model
- Within the factory settings or a dedicated 'CAN Bus Settings' menu, locate options to configure the CAN Bus.
- Select 'Raise' as the CAN Bus Box manufacturer.
- Choose the correct car model and year from the provided list (e.g., Ford Explorer 2006-2010).
- Save the settings and reboot your Android head unit for changes to take effect.
Figure 10: Selecting CAN Bus Manufacturer and Car Model
6. Operation
Once properly installed and configured, the RZ-FD69 CAN Bus Decoder operates automatically in the background. It translates the CAN Bus signals from your vehicle into a format that your Android head unit can understand, and vice-versa. This enables features such as:
- Steering wheel control functionality.
- Display of vehicle information (if supported by the head unit and CAN Bus data).
- Integration of reverse camera signals (if wired correctly).
No direct user interaction with the decoder is required after initial setup.
7. Maintenance
The Pinmany RZ-FD69 CAN Bus Decoder is a low-maintenance device. To ensure optimal performance and longevity:
- Keep the device free from moisture and extreme temperatures.
- Ensure all connections remain secure and free from corrosion.
- Avoid physical impact or excessive force on the device or its connectors.
- Periodically check for any loose wiring, especially after driving on rough terrain.
No user-serviceable parts are inside the decoder. Do not attempt to open or repair the device yourself.
8. Troubleshooting
If you experience issues with your RZ-FD69 CAN Bus Decoder, consider the following troubleshooting steps:
- No Functionality / Incorrect Functionality:
- Verify all wiring connections are correct and secure according to the pin definition chart (Figure 7).
- Ensure the Android head unit is properly configured for the CAN Bus, with the correct manufacturer ('Raise') and car model selected (Figure 10).
- Check the power supply to the CAN Bus decoder; ensure it receives stable 12V power within the +9V~+16V range.
- Confirm your Android head unit has the necessary 8-pin connector for serial communication.
- Intermittent Issues:
- Check for loose connections or damaged wires.
- Ensure the decoder is securely mounted and not subject to excessive vibration.
- Head Unit Not Recognizing CAN Bus:
- Re-enter the factory settings on your Android head unit and re-select the CAN Bus manufacturer and model.
- If prompted for a factory password, ensure you are using the correct one. Contact your Android radio seller if unsure.
- Verify that your specific car model and year are listed as compatible.
If problems persist after attempting these steps, please contact customer support for further assistance.
9. User Tips
- Professional Installation Recommended: Due to the complexity of car wiring and CAN Bus systems, professional installation is highly recommended to avoid damage to the decoder or vehicle electronics.
- Double-Check Compatibility: Always confirm that both your vehicle model/year and your Android head unit are compatible with the RZ-FD69 decoder before attempting installation.
- Power Cycle for Troubleshooting: If you experience unexpected behavior, try turning off your vehicle, removing the key, waiting a few minutes, and then restarting. This can sometimes reset the CAN Bus system.
- Document Factory Passwords: Keep a record of any factory passwords used for your Android head unit's settings, as these are crucial for CAN Bus configuration.
10. Warranty and Support
This product is manufactured by RAISE under the Pinmany brand. For any questions regarding the product, installation, or troubleshooting, please contact the seller or manufacturer directly. Ensure you have your purchase details and product model (RZ-FD69) available when seeking support.
The manufacturer aims to provide the best service to meet your needs. If you have any ideas about product requirements or encounter issues, please reach out to them in advance.
