1. Product Overview
The SKMEI 2514 is a stylish retro digital watch featuring a square case and a stainless steel strap. It offers multiple functions including time display, alarm, stopwatch, complete calendar, and LED backlight. Designed for both men and women, this watch combines classic aesthetics with modern digital functionality.


2. Setup and Initial Use
2.1 Button Functions

- LIGHT Button: Activates the LED backlight. Also functions as a RESET button in certain setting modes.
- MODE Button: Cycles through different modes (Time, Alarm, Stopwatch, Date).
- START/STOP Button: Used to start/stop the stopwatch or adjust settings.
2.2 Setting Time and Date
- In normal time display mode, press the MODE button repeatedly until you enter the time setting mode (usually indicated by flashing digits).
- Use the START/STOP button to adjust the flashing digit (hours, minutes, seconds).
- Press the MODE button to move to the next setting (e.g., from hours to minutes, then to date, month, day of week).
- Once all settings are correct, press the MODE button again to exit the setting mode and return to normal time display.
2.3 Setting the Alarm
- From normal time display, press the MODE button until the alarm time is displayed (often indicated by 'AL' or a bell icon).
- Press the START/STOP button to adjust the alarm hour.
- Press the MODE button to move to the alarm minute setting.
- Use the START/STOP button to adjust the alarm minute.
- Press the MODE button to confirm and exit.
- To activate/deactivate the alarm, typically a short press of the START/STOP button in alarm display mode will toggle it on/off.
2.4 Using the Stopwatch
- From normal time display, press the MODE button until the stopwatch mode is displayed (usually '00:00:00').
- Press the START/STOP button to start the stopwatch.
- Press the START/STOP button again to pause/resume.
- To reset the stopwatch, press the LIGHT button while the stopwatch is paused.
2.5 Activating the Backlight
- Press the LIGHT button to illuminate the display. The backlight will typically stay on for a few seconds.
3. Maintenance
3.1 Water Resistance
This watch is rated for 3 ATM (30 meters) water resistance. This means it is suitable for daily use and can withstand splashes, sweat, and light rain. It is NOT suitable for showering, swimming, diving, or any activities involving submersion in water.

3.2 Cleaning
- Wipe the watch case and strap regularly with a soft, dry cloth to remove dust and dirt.
- For stainless steel straps, a slightly damp cloth can be used, followed by immediate drying.
- Avoid using chemical cleaners, solvents, or abrasive materials as they may damage the watch's finish.
3.3 Battery Replacement
The watch comes with a battery included. When the display becomes dim or the watch stops functioning, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
4. Troubleshooting
- Display is blank or dim: The battery may be low or depleted. Replace the battery.
- Time is incorrect: Re-set the time following the instructions in Section 2.2. Ensure the 12/24 hour format is correctly set if applicable.
- Alarm not sounding: Check if the alarm function is activated (refer to Section 2.3). Ensure the alarm time is set correctly.
- Buttons are unresponsive: Ensure the watch is not in a locked mode (if applicable, though not a stated feature for this model). If the issue persists, a battery replacement or professional inspection may be needed.
- Water inside the watch: Despite its water resistance, extreme temperature changes or improper handling can sometimes lead to condensation. If water appears inside, stop using the watch immediately and seek professional repair to prevent further damage.
5. Specifications

| Feature | Specification |
|---|---|
| Brand Name | Skmei |
| Model Number | SKMEI 2514 |
| Movement | Digital |
| Display Type | Digital |
| Case Material | Alloy (Zinc Alloy) |
| Case Shape | Rectangle |
| Case Thickness | 9.3mm |
| Dial Diameter | 35.2mm |
| Dial Window Material Type | Glass |
| Band Material Type | Stainless steel |
| Band Width | 20.5mm |
| Band Length | 23cm |
| Clasp Type | Bracelet Clasp |
| Water Resistance Depth | 3Bar (30 meters) |
| Features | Luminous, LED Display, Chronograph, Complete Calendar, Alarm, Week Display, 12/24 Hour Format |
| Battery Included | Yes |
| Weight | 63g |
| Certification | CE |
6. User Tips
- Versatile Style: The unisex design makes this watch suitable for a wide range of users, including men, women, students, and couples.
- Gift Idea: Its classic retro appeal makes it a thoughtful gift for family and friends.
- Readability: The LED display and luminous features ensure good readability in various lighting conditions.
7. Warranty and Support
For any questions, concerns, or support regarding your SKMEI 2514 Digital Watch, please contact the seller directly. They can provide assistance with product inquiries, troubleshooting, and any potential warranty claims.
Please note that while the product is designed for durability, misuse or unauthorized modifications may void any applicable warranty.





