SmallRig Wireless Remote Controller

1. Introduction

The SmallRig Wireless Remote Controller 5462 is designed for seamless control of mainstream action cameras and smartphones. It enables remote shooting at extended distances, making it ideal for self-portraits, group photos, and various creative shooting scenarios. This versatile remote enhances your photography and videography experience by providing convenient control over your devices.

2. Package Contents

Please check the package to ensure all items are present:

• Wireless Remote Controller x 1
• Wrist Strap x 1
• USB-C Cable (20cm / 7.87in) x 1

3. Product Overview

Familiarize yourself with the buttons and indicators on your SmallRig Wireless Remote Controller:

Figure 1: Front view of the SmallRig Wireless Remote Controller 5462, showing three LED indicators at the top, a power button (circle with line) below them, an 'M' button (mode switch) in the middle, and a red-ringed circular button (shutter/record) at the bottom.

• LED Indicators: Three small lights at the top, indicating status (e.g., power, connection, mode).
• Power Button (⏻): Located below the LEDs, used to power the remote on/off.
• Mode Switch Button (M): In the middle, used to cycle through different shooting modes (e.g., photo, video, time-lapse).
• Shutter/Record Button (◯): The red-ringed circular button at the bottom, used to trigger photo capture or start/stop video recording.

4. Specifications

5. Compatibility

The SmallRig Wireless Remote Controller 5462 is compatible with a wide range of action cameras and smartphones:

Action Cameras:

• GoPro HERO13 / 12 / 11 Black
• DJI Osmo Action 5 Pro / Osmo Action 4
• Insta360 X5 / X4 / X3, GO 3S / GO 3, Ace Pro / Ace Pro 2

Smartphones:

• iPhone 16 Pro / 15 Pro / 14 Pro Max
• Samsung Galaxy S24 Ultra / Galaxy S20
• vivo X100 Pro
• HONOR 20 Pro
• Huawei Mate 30
• iQOO Neo 10
• Xiaomi 14 Pro
• OPPO Find X5 Pro

6. Setup

6.1 Charging the Remote Controller

1. Connect the supplied USB-C cable to the charging port on the remote controller.
2. Connect the other end of the USB-C cable to a standard USB power adapter (not included) or a computer's USB port.
3. The LED indicators will show charging status. Once fully charged, the indicators will change (refer to the product's specific LED behavior for full charge indication).

6.2 Pairing with Your Device

The pairing process may vary slightly depending on your action camera or smartphone model. Generally, follow these steps:

1. Power On the Remote: Press and hold the Power Button (⏻) until the LED indicators light up.
2. Activate Pairing Mode on Remote: The remote will typically enter pairing mode automatically when powered on for the first time or if no device is connected. If not, consult the remote's specific instructions for manual pairing mode activation (often involves holding the Power or M button).
3. Enable Bluetooth on Your Device: On your action camera or smartphone, go to the Bluetooth settings and ensure Bluetooth is enabled.
4. Search for Devices: Your device should scan for available Bluetooth devices. Look for "SmallRig Remote 5462" or a similar name in the list.
5. Connect: Select the remote controller from the list to initiate pairing. Once connected, the remote's LED indicators will typically show a stable light, indicating a successful connection.

Note: For detailed pairing instructions specific to your action camera or smartphone, please refer to their respective user manuals.

7. Operating Instructions

7.1 Basic Functions

• Power On/Off: Press and hold the Power Button (⏻) for a few seconds to turn the remote on or off.
• Sleep Mode: The remote may enter sleep mode after a period of inactivity to conserve battery. Press any button to wake it up.
• Shutter/Record: Press the Shutter/Record Button (◯) to take a photo or start/stop video recording.

7.2 Mode Switching (Action Cameras)

The Mode Switch Button (M) allows you to cycle through different shooting modes on compatible action cameras (e.g., photo, video, time-lapse photography). The exact modes and their order may vary by camera brand and model.

• Press the M Button to switch between available modes.
• Observe your action camera's screen or indicators to confirm the selected mode.

Note: The Mode Switch (M) button is ineffective with smartphones. Mode switching on smartphones must be done manually on the device itself.

8. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote controller. Do not use harsh chemicals or abrasive materials.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the remote frequently. Charge it regularly, even if not in use for extended periods.
• Water Resistance: The remote is not waterproof. Avoid exposing it to water or high humidity.

9. Troubleshooting

9.1 Remote Not Pairing/Connecting

• Ensure the remote is charged and powered on.
• Make sure Bluetooth is enabled on your action camera or smartphone.
• Move the remote closer to your device (within 30m / 98.4ft).
• Try restarting both the remote controller and your device.
• Forget the device in your phone's Bluetooth settings and attempt to re-pair.
• Check if your device is listed in the compatibility section.

9.2 Remote Not Responding

• Check the battery level of the remote controller.
• Ensure the remote is still connected via Bluetooth to your device.
• If using with a smartphone, remember that the 'M' button for mode switching is not functional; modes must be changed on the phone itself.
• Verify that the action camera or smartphone is in a state ready to receive commands (e.g., not in a menu, not frozen).

9.3 Short Battery Life

• Ensure the remote is fully charged before use.
• Avoid leaving the remote powered on when not in use.
• Extreme temperatures can affect battery performance.

10. User Tips

• Secure Your Remote: Always use the included wrist strap to prevent accidental drops of the remote controller during active shooting sessions.
• Optimal Setup: For best remote shooting performance and composition, consider mounting your action camera or smartphone on a selfie stick (e.g., SmallRig ID 5403) or a magic arm with crab clamp kit (e.g., SmallRig ID 4766, 3757B).
• Integrated Solutions: If you prefer an all-in-one solution for remote control and device support, explore selfie tripods designed for action cameras and phones (e.g., SmallRig ID 5464).
• Smartphone Mode Control: Remember that while the remote can trigger the shutter/record on smartphones, mode switching (e.g., photo to video) must be done directly on the smartphone's screen.

11. Warranty and Support

SmallRig products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact SmallRig customer support through their official website or your point of purchase. Keep your proof of purchase for any warranty claims.