SMAILWOLF M5 Wireless Bluetooth Mouse User Manual

1. Introduction

Thank you for choosing the SMAILWOLF M5 Wireless Bluetooth Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your mouse to ensure optimal performance and a seamless user experience. The M5 mouse features a lightweight design, three-mode connectivity (2.4G wireless, Bluetooth, and wired), a high-precision PAW3311 sensor, and an RGB magnetic charging base.

2. Product Features

• Three-Mode Connectivity: Seamlessly switch between 2.4G wireless, Bluetooth 5.1, and USB wired connections.
• High-Precision Sensor: Equipped with a PIXART PAW3311 optical sensor for accurate tracking.
• Adjustable DPI: 6 adjustable DPI settings from 800 to 12000 DPI, configurable via driver.
• Lightweight Design: Weighs approximately 55±3g for flexible and swift operation.
• Durable Micro-switches: Features 20 million click micro-switches for long-lasting performance and fast feedback.
• RGB Magnetic Charging Base: Convenient and fast charging with an exclusive RGB light-emitting magnetic base, also equipped with a USB expansion interface.
• Rechargeable Battery: Built-in 500mAh battery.
• Multi-System Compatibility: Supports PC (Win2000/XP/ME/Vista/Win7/Win8/Win10/Win11), Android, Linux, Mac, etc.

3. Specifications

4. Package Contents

The SMAILWOLF M5 mouse package typically includes:

• SMAILWOLF M5 Wireless Bluetooth Mouse
• USB Type-C Charging Cable
• 2.4G USB Receiver (stored in the mouse)
• RGB Magnetic Charging Base
• User Manual (this document)

5. Setup and Connection

The M5 mouse offers three connection modes: Wired, 2.4G Wireless, and Bluetooth. You can switch between these modes freely.

5.1. Wired Mode Connection

1. Connect the provided USB Type-C cable to the mouse and then to an available USB port on your computer.
2. The mouse will automatically switch to wired mode. The computer screen pointer can be moved by moving the mouse, and the mouse can be used normally.

5.2. 2.4G Wireless Mode Connection

1. Locate the power switch on the underside of the mouse and slide it to the 2.4G position. The indicator light will flash red.
2. Remove the 2.4G USB receiver from its storage compartment on the mouse.
3. Plug the 2.4G USB receiver into an available USB port on your computer.
4. The mouse should connect automatically.

5.3. Bluetooth Mode Connection

1. Locate the power switch on the underside of the mouse and slide it to the Bluetooth position. The indicator light will flash green or blue.
2. To switch Bluetooth channels (BT1/BT2): Short press the PB button (located on the underside of the mouse) to toggle between BT1 (green light) and BT2 (blue light).
3. To enter pairing mode: Press and hold the PB button for 3 seconds. The green or blue light will flash rapidly, indicating the mouse is ready for pairing.
4. On your computer, tablet, or mobile phone, search for Bluetooth devices and select the corresponding Bluetooth name (e.g., "SMAILWOLF M5 BT1" or "SMAILWOLF M5 BT2").
5. Once connected, the mode indicator light on the mouse will stay on for 3 seconds to confirm a successful connection.

6. Operating Instructions

6.1. Key Functions

The M5 mouse features 6 programmable buttons and additional functional elements:

1. Left Click Button
2. Right Click Button
3. Side Key + (Forward)
4. Side Key - (Backward)
5. Scroll Wheel (Roller)
6. DPI Key (Cycle through DPI settings)
7. PB Button (Bluetooth/Wireless switching, Pairing)
8. Bluetooth/Wireless Switching (Toggle switch on underside)
9. Charging Copper Columns (for magnetic charging base)
10. Type-C Charging Port
11. 2.4G USB Receiver Storage Compartment
12. Fingerprint Light Switching (Touch area on charging base for RGB control)

6.2. Indicator Light Description

The mouse has indicator lights for DPI, mode, and battery status:

• DPI Light: Changes color to indicate the current DPI setting:
  • 1200 DPI: Red
  • 1600 DPI: Green
  • 2400 DPI: Blue
  • 3200 DPI: Yellow
  • 6400 DPI: Cyan
  • 12000 DPI: Purple
• Mode Lights: Indicates the active connection mode:
  • 2.4G Mode: Red light
  • BT1 Mode: Green light
  • BT2 Mode: Blue light
• Battery Indicator:
  • Low Battery: Flashing red light
  • Charging: Constantly on red light
  • Fully Charged: Light off

6.3. Return Rate Adjustment

You can adjust the return rate (polling rate) of the mouse:

• Hardware Adjustment: Simultaneously press the middle button (scroll wheel) and the right mouse button for 3 seconds.
• Software Adjustment: The return rate can also be adjusted through the dedicated mouse driver software.

6.4. Sleep and Wake-up Instructions

To conserve battery, the mouse enters sleep modes after periods of inactivity:

• Mild Sleep: After 15 seconds of inactivity, the mouse enters a mild sleep state. It can be woken up by moving the mouse or pressing any button.
• Deep Sleep: After 20 minutes of inactivity, the mouse enters a deep sleep mode. It can be woken up by pressing any button.

6.5. Software Application for Comprehensive Control

The SMAILWOLF M5 mouse supports a dedicated application for comprehensive control, allowing you to customize various settings:

• DPI adjustment
• Return rate configuration
• Key function programming
• Other advanced configurations

7. Maintenance and Care

• Cleaning: Use a soft, dry cloth to clean the mouse. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the mouse.
• Charging: Charge the mouse using the provided Type-C cable or the magnetic charging base. Avoid using unapproved chargers or cables.
• Storage: When not in use for extended periods, store the mouse in a cool, dry place.
• Avoid Extreme Conditions: Do not expose the mouse to extreme temperatures, direct sunlight, or high humidity.
• Handle with Care: Avoid dropping the mouse or subjecting it to strong impacts.

8. Troubleshooting

• Mouse not responding: Check battery level. Ensure the correct connection mode (2.4G, Bluetooth, or wired) is selected. Re-plug the USB receiver or Type-C cable. Re-pair Bluetooth if necessary.
• Lag or intermittent connection: Ensure the mouse is within the 10m transmission distance. Avoid interference from other wireless devices. Ensure the receiver is plugged into a direct USB port, not a hub.
• DPI not changing: Press the DPI button firmly. If using software, ensure the driver is installed correctly and settings are applied.
• Charging issues: Ensure the Type-C cable or magnetic base is properly connected. Check if the charging indicator light is on. Try a different USB port or power adapter.
• Mouse not waking from sleep: Press any button to wake the mouse. If in deep sleep, it requires a button press.

9. User Tips

• For optimal gaming performance, use the 2.4G wireless or wired mode, as they offer higher return rates (up to 1000Hz) compared to Bluetooth (125Hz).
• Regularly check for and install the latest mouse driver software from the SMAILWOLF website to unlock full customization options and performance enhancements.
• Utilize the magnetic charging base for convenient charging and to keep your workspace tidy. The RGB lighting on the base can also be adjusted.
• Experiment with different DPI settings to find what best suits your tasks, whether it's precise graphic design or fast-paced gaming.

10. Warranty and Support

SMAILWOLF products are designed for reliability and performance. For any issues or inquiries, please refer to the following:

• Warranty Information: Please retain your proof of purchase for warranty claims. Specific warranty terms and conditions may vary by region.
• Technical Support: For technical assistance, troubleshooting, or driver downloads, please visit the official SMAILWOLF support website or contact their customer service.
• User Manual PDF: A digital version of this user manual is available for download at https://manuals.plus/m/6b4e8ff8efff80ceb4f4ffc1ac4669404b645112ac3dc06aa8014f117e7a3f14.