1. Introduction
The MACHENIKE KG98 is a high-performance tri-mode mechanical keyboard designed for both gaming and general use. It offers versatile connectivity options, a premium acoustic design, hot-swappable switches, and a long-lasting battery. This manual provides detailed instructions to help you set up, operate, and maintain your keyboard.
2. Package Contents
- MACHENIKE KG98 Mechanical Keyboard
- USB Type-C Cable
- 2.4G Wireless Receiver
- Keycap Puller
- Switch Puller
- User Manual (this document)
3. Product Overview
The KG98 features a 98-key layout with an integrated Numpad, designed for efficiency and comfort. It incorporates a premium 5-layer acoustic filling gasket design for enhanced sound and feel.
4. Setup and Connectivity
4.1 Charging the Keyboard
Before first use, fully charge the keyboard using the provided USB Type-C cable. Connect one end to the keyboard's Type-C port and the other end to a USB power source (e.g., computer, wall adapter).
4.2 Tri-Mode Connectivity
The KG98 supports three connection modes: Type-C wired, 2.4G wireless, and Bluetooth.
4.2.1 Switching Modes
Use the multifunction toggle switch located on the top right of the keyboard to select your desired connection mode.
4.2.2 2.4G Wireless Connection
- Locate the 2.4G wireless receiver, usually stored in a compartment on the keyboard.
- Plug the 2.4G receiver into an available USB port on your computer.
- Slide the toggle switch on the keyboard to the '2.4G' position. The keyboard should connect automatically.
4.2.3 Bluetooth Connection
- Slide the toggle switch on the keyboard to the 'BT' position.
- On your device (PC, laptop, tablet), go to Bluetooth settings and enable Bluetooth.
- Search for new devices. The keyboard should appear as 'MACHENIKE KG98' or similar.
- Select the keyboard to pair. Follow any on-screen prompts to complete the pairing process.
4.2.4 Type-C Wired Connection
- Connect the provided USB Type-C cable to the keyboard's Type-C port.
- Connect the other end of the cable to a USB port on your computer.
- The keyboard will automatically switch to wired mode.
5. Operating Instructions
5.1 Basic Key Functions
The KG98 features a standard 98-key layout. All keys function as labeled. Refer to your operating system's keyboard settings for any specific key remapping or customization.
5.2 Multifunction Toggle Switch and Rotary Knob
The multifunction toggle switch (as shown in Section 4.2.1) also controls the keyboard's power and connection mode. The rotary knob next to it provides quick access to volume and RGB lighting controls.
- Volume Control: Rotate the knob to adjust system volume.
- Mute: Press the knob to mute/unmute audio.
- RGB Lighting Control: Press and hold the knob to cycle through different RGB lighting modes.
5.3 Adjustable Feet
The keyboard is equipped with three-stage height-adjustable feet on the underside. Adjust them to your preferred typing angle for ergonomic comfort.
5.4 RGB Lighting
The keyboard features a surround RGB light strip with multiple lighting modes. Use the rotary knob (press and hold) to cycle through various effects and colors.
6. Maintenance
6.1 Cleaning
- Disconnect the keyboard from all power sources before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and casing.
- For deeper cleaning, use the provided keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Do not immerse the keyboard in water or use harsh chemicals.
6.2 Hot-Swappable Switches
The KG98 supports full-key hot-swapping, allowing you to easily change switches without soldering.
- Removing Keycaps: Use the keycap puller to gently pull up on the keycap you wish to remove.
- Removing Switches: Use the switch puller to grasp the top and bottom clips of the switch and pull it straight up.
- Installing Switches: Align the pins of the new switch with the holes on the PCB. Gently press the switch down until it clicks into place. Ensure the pins are not bent.
- Installing Keycaps: Place the keycap over the switch stem and press down firmly.
7. Troubleshooting
- Keyboard not responding: Check the connection mode (wired, 2.4G, Bluetooth) and ensure it matches your device. Recharge the battery if using wireless modes.
- 2.4G wireless not connecting: Ensure the 2.4G receiver is properly plugged in and the keyboard is in 2.4G mode. Try a different USB port.
- Bluetooth not pairing: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again.
- Keys not working: If individual keys are not working, try reseating the keycap and switch. If the issue persists, the switch may need replacement (utilize the hot-swap feature).
- RGB lighting not working: Check if the lighting is turned off or if the brightness is set to minimum. Cycle through lighting modes using the rotary knob.
8. Specifications
| Feature | Description |
|---|---|
| Brand Name | MACHENIKE |
| MACHENIKE Model | KG98 |
| Keyboard Standard | 98 Keys |
| Operation Style | Mechanical |
| Type | Bluetooth Wireless |
| Interface Type | USB |
| Application | Desktop, Laptop, Tablet |
| Full Size keyboard | Yes |
| Wrist Support | No |
| Backlight Type | Multicolor (RGB) |
| Switches Hot swap | Yes |
| Switches manufacturer | Kailh |
| Axis Body Brand | Kailh |
| Keycup material | PBT plastic |
| Keycup printing | Doublshot |
| Battery Included | Yes |
| Battery Capacity | 5000mAh - 10000mAh (depending on switch type) |
| System Compatibility | WIN/MAC |
| PCB | 1.2 mm Flex-cut PCB |
| Structure | Gasket |
| Filling | 5-layer acoustic padding |
| Package Dimensions | Length: 43 cm, Width: 20 cm, Height: 9 cm |
| Package Weight | 1.571 kg |
8.1 Switch Specifications
9. User Tips
- Experiment with different RGB lighting modes and brightness levels to find your preferred aesthetic.
- Take advantage of the hot-swappable switches to customize your typing feel or replace worn-out switches easily.
- Adjust the keyboard's feet to find the most comfortable typing angle for long sessions.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official MACHENIKE website or the comprehensive user manual available as a PDF. The PDF manual can be accessed via this link: MACHENIKE KG98 User Manual (PDF).
