1. Product Overview
The Xiaomi Smart Door Lock E30 Visual Screen is an advanced smart lock system designed for enhanced home security and convenience. It integrates multiple unlocking methods, a visual screen with a wide-angle camera, and smart home connectivity through the Mi Home App.
Key Features:
- 160° Ultra-wide Angle Camera: Provides a broad view of your doorstep.
- 3.5-inch IPS Visual Color Screen: Allows you to see visitors from inside the door.
- Full-Color Night Vision: Clear visibility even in low-light conditions.
- Multiple Unlocking Methods: Fingerprint, password (fixed, virtual, cycle/one-time), NFC, Bluetooth, and mechanical keys.
- AI Smart Cat's Eye: Automatic recording of activity in front of the door.
- Mi Home App Integration: Remote monitoring, alarm notifications, and smart scene customization.
- Dual Power Supply System: Ensures long-lasting operation and emergency power options.
- Three-Proof Smart Lock Body: Enhanced security against demolition, broadcast interference, and virtual mask detection.
2. Setup and Installation
2.1 Pre-installation Checklist
- Ensure your door thickness is between 40-120mm.
- The lock is suitable for wooden doors.
- Confirm compatibility with 6068 mortise locks.
- Installation requires drilling. Professional installation is recommended.
2.2 Power Supply
The lock operates using a dual power system:
- Main Power: 4 No. 5 batteries.
- Rechargeable Battery: A 5000mAh lithium battery (7.4V) provides approximately 5 months of life.
- Emergency Power: A Type-C port (5V-0.5A) is available for emergency power supply if batteries run out.
2.3 Mi Home App Connection
- Download and install the Mi Home App on your smartphone.
- Important: Before connecting, change the region setting within the Mi Home App to "Chinese mainland".
- Follow the in-app instructions to add and pair your Xiaomi Smart Door Lock E30.
3. Operating Instructions
3.1 Unlocking Methods
The lock supports various convenient unlocking methods:
- Fingerprint: Utilizes AI fingerprint recognition technology with a recognition speed of less than 0.5 seconds and a recognition rate of 99.29%. The system learns and accumulates fingerprint characteristics over time for improved accuracy.
- Password:
- **Fixed Password:** For long-term effectiveness.
- **Virtual Password:** Enter random numbers before and after your actual password to prevent peeping.
- **Cycle/One-time Password:** Generate temporary passwords for guests or specific timeframes via the Mi Home App.
- NFC: Unlock by swiping compatible NFC devices (e.g., Xiaomi phones, bracelets, watches, smart door lock NFC cards). Additional purchases may be required for some NFC devices.
- Bluetooth: Unlock via your mobile phone's Bluetooth connection through the Mi Home App.
- Mechanical Keys: For emergency unlocking.
3.2 Visual Screen and Camera Functions
- Indoor Visual Screen: The 3.5-inch IPS screen on the rear panel automatically lights up when the doorbell rings, allowing you to see visitors. You can also manually wake up the screen to check outside activity.
- AI Smart Cat's Eye: Automatically records video when someone stays in front of the door, providing video notifications for security.
- 160° Ultra-wide Angle Camera: Offers a comprehensive view of your entrance.
- Full-Color Night Vision: Maintains a clear, full-color picture even in weak light conditions, without relying solely on infrared.
- Two-way Audio & Voice Changer: Communicate with visitors through the built-in doorbell and microphone. A voice changer function is available for privacy when alone at home.
3.3 Mi Home App Functions
The Mi Home App provides comprehensive control and monitoring capabilities:
- Remote Monitoring: View the dynamics outside your door remotely from your mobile phone.
- Multi-screen Linkage: Connect with other Xiaomi smart devices (e.g., Xiaomi TV, smart home screens) to view the door's activity.
- Alarm Notifications: Receive alerts for various events such as low battery, multiple incorrect attempts, or tampering.
- Access Management: Share management rights of the door lock with family members.
- Smart Scene Customization: Integrate the lock into smart home routines.
- Do Not Disturb Mode: Activate to silence notifications or doorbell rings during specific times.
4. Maintenance
4.1 Battery Management
- Regularly check the battery level via the Mi Home App.
- Replace the 4 No. 5 dry batteries when a low battery alarm is issued.
- The 5000mAh rechargeable lithium battery provides approximately 5 months of life. Recharge it using the Type-C emergency power port when needed.
- For optimal performance, ensure both battery systems are adequately charged.
4.2 Cleaning
- Wipe the lock's surface with a soft, dry cloth.
- Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- Keep the fingerprint sensor and camera lens clean for optimal performance.
5. Troubleshooting
5.1 Common Issues and Solutions
| Issue | Possible Cause | Solution |
|---|---|---|
| Lock not responding / Low battery alarm | Depleted batteries. | Replace the 4 No. 5 dry batteries or recharge the 5000mAh lithium battery via the Type-C port. |
| Unable to connect to Mi Home App | Incorrect app region setting. | Ensure the Mi Home App region is set to "Chinese mainland". |
| Fingerprint recognition failure | Dirty sensor, incorrect finger placement, or unregistered fingerprint. | Clean the fingerprint sensor. Ensure proper finger placement. Re-register fingerprint if necessary. |
| Doorbell not ringing / No visual feed | Do Not Disturb mode active, connectivity issue, or camera obstruction. | Check Mi Home App settings for Do Not Disturb. Verify Wi-Fi connection. Clean camera lens. |
| Multiple trial and error alarm | Repeated incorrect unlocking attempts. | Verify the correct password/fingerprint. The lock will temporarily disable certain functions after too many failed attempts. |
5.2 Security System Alarms
The lock is equipped with multiple security alarms:
- External Panel Cover-up Alarm: Detects attempts to obscure the outdoor unit.
- Low Battery Alarm: Notifies when power is critically low.
- Coercion of Fingerprints Alarm: Alerts if an unrecognized fingerprint is used under duress.
- Multiple Trial and Error Alarm: Triggers after repeated incorrect unlocking attempts.
- Anti-demolition Alarm: Detects attempts to forcibly remove the lock.
- Anti-broadcast Alarm: Protects against signal interference.
- Anti-door Virtual Mask Detection: Prevents unlocking with virtual masks.
6. Specifications
| Feature | Specification |
|---|---|
| Product Model | XMZNMST11LK |
| Front Panel Dimensions | 420 x 76.5 x 1.5 mm |
| Rear Panel Dimensions | 420 x 76.5 x 30.5 mm |
| Net Weight | Approx. 3.7 kg |
| Power Supply | 4x No. 5 batteries, 5000mAh Lithium Battery (7.4V) |
| Emergency Power Supply | Type-C (5V-0.5A) |
| Product Safety Level | Class B (GA 374-2019) |
| Lock Cylinder Security Level | C Level |
| Wireless Connection | Bluetooth 5.0, Wi-Fi IEEE 802.11b/g/n/ax 2.4GHz, NFC |
| Environmental Adaptability Level | Level I (GA 374-2019) |
| Working Humidity | 0-93% RH, no condensation |
| Working Temperature | -10°C to 55°C |
| Camera Angle | 160° Ultra-wide angle |
| Camera Resolution | 1 Million Pixels |
| Screen Type | 3.5-inch IPS Visual Color Screen |
| Material | Aluminium alloy |
| Suitable Door Type | Wooden Door |
| Fit Door Thickness | 40-120mm |
| Suitable for Mortise | 6068 |
7. Warranty and Support
- Warranty: The product comes with a 3-year free warranty.
- Customer Service: A 24-hour customer service hotline is available at 400-100-5678 for any inquiries or issues.
- Emergency Service: Quick response night emergency service is provided.
- Installation Support: Free door-to-door service for initial installation and disassembly.
- Service Outlets: Over 2000 direct service outlets are available.
8. User Tips
- App Region Setting: Always ensure your Mi Home App is set to "Chinese mainland" for proper functionality and connectivity with the lock. This is a common point of confusion for international users.
- Fingerprint Enrollment: When enrolling fingerprints, try to capture different angles and pressures of your finger to improve recognition accuracy over time.
- Virtual Passwords: Make use of the virtual password feature to enhance security when entering your code in public or when someone might be watching.
- NFC Device Compatibility: If using NFC, verify that your Xiaomi or Redmi brand phone, bracelet, or watch is supported and has the NFC function enabled.
- Regular Checks: Periodically check the battery status through the Mi Home App to avoid unexpected lockouts.