1. Introduction
This manual provides detailed instructions for setting up, operating, and troubleshooting your KCEVE KVM Switch. This device allows you to control multiple computers (desktops and laptops) using a single set of keyboard, mouse, and dual monitors, enhancing your productivity and simplifying your workspace.
The KVM switch comes in different configurations (302CDH, 302CCH, 302HHH) to suit various connectivity needs. Please refer to the specific details for your model throughout this manual.
2. Package Contents
Please check the package to ensure all items are present:
- 1 x KVM Switch (Model 302CDH, 302CCH, or 302HHH)
- USB 3.0 Cables (1.5m) - Quantity varies by model
- HDMI Cables (1.5m) - Quantity varies by model
- USB-C Cables - Quantity varies by model
- 1 x Wired Remote (1.5m)
- 1 x Power Adapter (DC 12V)
- 1 x User Manual

3. Setup Instructions
Follow these steps to connect your KVM switch:
3.1 General Connection Diagram

Important Note:
- Please use DP1.4 cable and HDMI2.1 cable and keep the cable length as short as possible to get a stable signal.
- Please connect the computer's USB cable to the KVM's USB port, otherwise the keyboard and mouse will not be recognized.
- Ensure your laptop's USB-C port and HDMI port can output video simultaneously for dual display functionality.
3.2 Model-Specific Connection Details
Model 302CDH (1 Laptop, 2 Desktops)
- Laptop (PC1): Connect 1 HDMI cable + 1 USB-C cable to the KVM switch.
- Desktop (PC2): Connect 1 HDMI cable + 1 DisplayPort cable + 1 USB cable to the KVM switch.
- Desktop (PC3): Connect 2 HDMI cables + 1 USB cable to the KVM switch.
- Monitors: Connect your two monitors to the "OUT A" and "OUT B" HDMI ports on the KVM switch.
- USB Devices: Connect your keyboard, mouse, printer, U disk, etc., to the USB 3.0 ports on the KVM switch.
- Power: Connect the DC 12V power adapter to the KVM switch.

Model 302CCH (2 Laptops, 1 Desktop)
- Laptop (PC1): Connect 1 HDMI cable + 1 USB-C cable to the KVM switch.
- Laptop (PC2): Connect 1 HDMI cable + 1 USB-C cable to the KVM switch.
- Desktop (PC3): Connect 2 HDMI cables + 1 USB cable to the KVM switch.
- Monitors: Connect your two monitors to the "OUT A" and "OUT B" HDMI ports on the KVM switch.
- USB Devices: Connect your keyboard, mouse, printer, U disk, etc., to the USB 3.0 ports on the KVM switch.
- Power: Connect the DC 12V power adapter to the KVM switch.

Model 302HHH (3 Desktops)
- Desktop (PC1): Connect 2 HDMI cables + 1 USB cable to the KVM switch.
- Desktop (PC2): Connect 2 HDMI cables + 1 USB cable to the KVM switch.
- Desktop (PC3): Connect 2 HDMI cables + 1 USB cable to the KVM switch.
- Monitors: Connect your two monitors to the "OUT A" and "OUT B" HDMI ports on the KVM switch.
- USB Devices: Connect your keyboard, mouse, printer, U disk, etc., to the USB 3.0 ports on the KVM switch.
- Power: Connect the DC 12V power adapter to the KVM switch.

3.3 Power Connection
Connect the provided DC 12V power adapter to the KVM switch. Ensure the KVM switch is powered on using the ON/OFF switch on the front panel.


4. Operating Instructions
4.1 Switching Between Computers
The KVM switch offers two convenient methods for switching between connected computers:
- Panel Button Switching: Press the corresponding PC1, PC2, or PC3 button on the front panel of the KVM switch to select the desired computer. LED lights above each button indicate the active computer.
- Wired Remote Control: Use the included 1.5m wired remote controller to switch between computers. This provides a simpler and more convenient desktop experience.
Note: Hotkey switching via keyboard is NOT supported.


4.2 Setting Display Modes (Mirror/Extend)
The KVM switch supports both Mirror (Duplicate) and Extend display modes for Windows operating systems. For macOS, only Mirror mode is typically supported, and extended mode functionality may be limited or unavailable depending on the Mac model (e.g., Apple M1/M2/M3).
To switch display modes in Windows:
- Press the "Windows + P" keys simultaneously on your keyboard.
- A small window will pop up, allowing you to select your desired display mode:
- Duplicate (Mirror) Mode: Both monitors will display the same image from the selected computer.
- Extend Mode: The window from the main screen can be dragged to the second screen, allowing for two different screens.


Video 4.1: How to set the output mode in Windows OS (Mirror/Extend)
4.3 EDID Emulator Function
The KVM switch features an EDID emulator, which helps maintain your display settings and window arrangements when switching between computers. This prevents windows from being rearranged or resized unexpectedly.
- The EDID function automatically adjusts monitor settings for optimal resolution and refresh rate.
- When switching back to a computer, the original window order will not change.
- The KVM switch provides an option to enable or disable the EDID function.


5. Maintenance
To ensure the longevity and optimal performance of your KVM switch, please follow these maintenance guidelines:
- Keep the device in a cool, dry place away from direct sunlight and heat sources.
- Avoid exposing the device to moisture or extreme temperatures.
- Clean the exterior of the KVM switch with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ensure all cables are securely connected to prevent signal loss or intermittent issues.
6. Troubleshooting
If you encounter issues with your KVM switch, please refer to the following common problems and solutions:
- No display or unstable signal:
- Ensure all HDMI, DisplayPort, and USB-C cables are securely connected.
- Use high-quality DP1.4 and HDMI2.1 cables.
- Keep cable lengths as short as possible (ideally not exceeding 1.5m for 4K resolution) to maintain signal integrity.
- Verify that your monitors and computers support the desired resolution (e.g., 4K@60Hz).
- Keyboard/Mouse not recognized:
- Confirm that the USB cable from your computer is connected to the corresponding USB input port on the KVM switch.
- Try connecting the keyboard/mouse directly to the computer to rule out peripheral issues.
- Laptop not charging:
- Ensure you are using a PD 100W charger connected to the KVM switch.
- Only the currently active laptop will be charged. Unused laptops will not receive power.
- Display issues with Apple M1/M2/M3 Macs:
- Apple M1/M2 Macs typically support only single-screen output.
- MacBook Pro (M3) may not output images through both USB-C and HDMI ports simultaneously; it might only output one image.
- Verify your specific Mac model's external display capabilities.
- Window arrangement changes after switching:
- Ensure the EDID emulator function is enabled on the KVM switch. This feature is designed to prevent window rearrangement.
- Cannot switch using hotkeys:
- This KVM switch model does not support hotkey switching. Please use the panel buttons or the wired remote control.
- Dual display not working on a computer:
- Ensure each computer has a dual graphics card and supports dual display when directly connected with two monitors.
- For laptops, confirm that both the USB-C and HDMI ports can output video simultaneously.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | AIMOS |
| Model Number | HDMI USB KVM Switch (Variants: 302CDH, 302CCH, 302HHH) |
| Type | USB Adapter |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS, UL |
| Video Resolution Support | Up to 4K@60Hz, 4K@30Hz, 2K@144Hz, 1080P@144Hz (backward compatible) |
| USB Ports | 4 x USB 3.0 (up to 5Gbps data transfer) |
| PD Charging (302CDH) | 73W (requires 100W PD charger) |
| PD Charging (302CCH) | 85W (requires 100W PD charger) |
| Video Standards (302CDH) | HDMI 2.0, DisplayPort 1.4 |
| Video Standards (302CCH) | HDMI 2.0, HDCP 2.2 |
| EDID Emulator | Yes |
| Switching Methods | Panel Button, Wired Remote (1.5m) |
| Power Supply | DC 12V |
| Dimensions (approx.) | 15.80cm x 6.60cm x 2.95cm (6.22in x 2.60in x 1.16in) |
| Weight (approx.) | 360g / 0.8LB |
| Operating Systems | Windows 7/8/10/11/XP/Vista, Mac OS, Linux, Chrome OS |



8. User Tips
- For optimal performance, always use high-quality, certified cables (HDMI 2.0/2.1, DisplayPort 1.4) and keep their lengths to a minimum.
- When connecting a laptop that supports PD charging, ensure you use a 100W Power Delivery charger for the KVM to enable efficient charging (73W or 85W output depending on model).
- If you experience display issues with macOS, remember that Apple M1/M2/M3 chips may have limitations on extended display modes. Verify your Mac's capabilities.
- Always connect the USB data cables from your computers to the KVM for proper recognition of shared peripherals.
- The EDID emulator is designed to prevent screen rearrangement. If you notice issues, check the EDID ON/OFF switch on the KVM.
- This KVM switch is ideal for various environments, including office work, multimedia teaching, home theaters, and gaming setups.
9. Warranty and Support
Your KCEVE KVM Switch is manufactured with high-quality standards and is certified with CE, FCC, RoHS, and UL. For any technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt for warranty validation.