Vandlion V68 Digital Voice Recorder User Manual

1. Important Cautions

Please read these cautions carefully before using the device to ensure safe and proper operation.

• Children should not operate the recorder unsupervised. Avoid dropping or colliding the device with hard objects to prevent data loss or hardware damage.
• Do not use this recorder while driving a motor vehicle or riding a bicycle. Prioritize driving safety.
• Regularly back up important files from the recorder. Data loss can occur, and files may be difficult to recover.
• Avoid using an overloaded charger or squeezing the charging cable with heavy objects for extended periods. Keep the device away from combustibles during charging to prevent fire hazards.
• Product performance and functions are subject to change without prior notice.
• Do not immerse the product in water or other liquids. Do not use organic solvents to clean parts, as this may cause damage.
• This product uses a built-in lithium battery. Do not disassemble it. Do not expose batteries to direct sunlight, fire, or similar overheating conditions.
• Avoid using the product in locations affected by strong magnetic/electromagnetic fields, radio waves, or high voltage, as this may impair its functionality.

Warm Tips for Battery Care:

If the device is not used for a long time, charge and discharge the product every 3 months to prevent battery failure.

2. Product Overview

The Vandlion V68 is a versatile digital voice recorder with noise reduction, MP3 player functionality, and a colorful TFT screen. It features a durable metal shell and supports voice-activated recording.

Key Features:

• Shell made from metal material, anti-fall strong.
• Professional recording chip for HD recording.
• Timestamp: Automatically names recording files by date.
• Timer Recording: Schedule recording at set times.
• AGC function: Automatically adjusts noise source.
• Real-time recording monitoring / Hearing aid function.
• Functions as a Voice Recorder, MP3 player, and USB drive.
• Playback functions: A-B segment repeat, variable speed playback, segmented playback.
• Built-in high-fidelity speakers for direct external sound.
• Password protection for files upon startup.
• Battery level checking.
• MIC recording.
• Eye-free operation with LED backlight and colorful TFT LCD screen.
• Voice-activated mode support.
• Low battery detection and automatic saving of recording files.
• Supports monitoring recording.
• Built-in rechargeable 580mAh lithium battery.
• Color: Black.

Product Diagram and Components:

Familiarize yourself with the device's layout and controls.

• USB port: Connects to a computer for file transfer (uploading and downloading).
• Lock button: Locks all buttons to prevent accidental operation.
• Reset button: Used to reset the device if it becomes unresponsive.
• Display screen: 1.44" TFT colorful screen (128*128 resolution).
• "+": Short press to increase volume.
• Return button: Short press to return to the previous menu level. During playback, short press to stop.
• Previous song button (<<): Short press to switch to the previous track. Long press to rewind.
• Delete button: Short press on the playback interface to access the delete menu.
• "-": Short press to decrease volume.
• Speaker hole: For external sound playback.
• Sound input port: For external audio input.
• Recording button (REC): One click to start recording.
• Next song button (>>): Short press to switch to the next track. Long press to fast forward.
• Play button (POWER/PLAY): Long press to turn on/off. Short press to play/pause. Short press to enter sub-menu or save settings in the main menu.
• Menu button (MENU): When pausing/stopping, short press to switch between music or recording files. When playing, short press to enter repeat mode, long press to enter settings menu.
• Headphone hole: Connects to headphone cable.
• TF card socket: Supports external memory expansion up to 128GB.
• Hanging rope hole: For attaching a lanyard.

3. Setup and Basic Operation

Power On/Off:

• To Turn On: When the device is off, long press the "Play" button.
• To Turn Off: When the device is on, long press the "Play" button.
• Automatic Shutdown: The device will automatically turn off after 3 minutes of inactivity.

Recording and Saving:

• From Power On State: Push the "Record" button upwards to enter recording state. Push the "Record" button downwards to save the recording file. Short press the "Play" button to pause or play the recording file.
• From Power Off State: Push the "Record" button upwards. The device will turn on and immediately enter the recording state.

Playback:

• Music Playback: After turning on, short press the "M" button to switch to music mode. Short press the "Play" button to play music files.
• Voice Playback: After turning on, short press the "M" button to switch to voice mode. Short press the "Play" button to play recording files.

4. Settings Menu

In standby mode, long press the "M" button to enter the main menu. Use the "Previous song" (<<) and "Next song" (>>) buttons to navigate, and the "Play" button to enter a selection. Use the "Return" button to exit a menu level.

4.1. Recording Settings:

• Recording Source:
  • Microphone Recording: Uses the built-in microphone.
  • Line-in Recording: Connect the device's headphone jack to the audio output of an external audio source (e.g., MP3 player) using recording cables.
• Recording Format: Select between "WAV Format" and "MP3 Format". Confirm with "Play", exit with "Return".
• Recording Bit Rate:
  • WAV: Options include 256kbps, 512kbps, 768kbps, 1024kbps, 1536kbps, 3072kbps.
  • MP3: Options include 32kbps, 64kbps, 128kbps.
  Confirm with "Play", exit with "Return".
• Recording Sensitivity: Select "Level 0" to "Level 7". Higher numbers indicate higher sensitivity (louder sound needed for activation). Confirm with "Play", exit with "Return".
• Segmented Recording: Set to "Off" or "On". Options for segment length: 30, 60, 90, or 120 minutes. If enabled, recordings will be automatically saved in segments of the chosen duration.
• Voice Control Mode (Voice Activated Recording):
  • Enable/Disable "voice switch".
  • Adjust "Voice sensitivity" (higher number = louder sound needed).

  Note: When "Sound activation mode" is on, the device records automatically when surrounding sound reaches a certain level and pauses when it falls below. Not recommended for critical environments.
• Monitoring Switch:
  • Enable/Disable "turn on/off listening".
  • When "Turn on Monitor listening" is selected and headphones are inserted, you can listen to the content being recorded in real-time.
• Scheduled Recording:
  • Enable/Disable "scheduled recording (on/off)".
  • Set "Start Time" and "End Time" using "+"/"-" to adjust numbers and "<<" / ">>" to adjust digits.
  • Set "scheduled recording period": "single/daily/working day".
• Recording Light Switch:
  • Select "off" to turn off the recording indicator light.
  • Select "on" to make the recording indicator light flash.
• Noise Reduction Settings:
  • Select "On/Off" and "Level 1~Level 7".
  • Higher levels provide more noise reduction.

4.2. Play Settings:

In playback mode, long press the "M" button to enter the main menu, then navigate to "Play settings".

• Play Mode: Select "random play/repeat all/single track repeat/single track play".
• A-B Segment Repeat: During playback, short press the "M" button once to mark point A. Short press "M" again to mark point B and repeat playback between A and B. Short press "M" again to exit A-B repeat mode.
• Sound Settings:
  • Equalizer: Select "Off/Rock/Funk/Hip Hop/Jazz/Classical/Electronic Music" and other 7 sound effect modes.
  • Variable Speed Playback: Select digits "+8, -8" for a total of 17 variable speed playback modes. Confirm with "Play", exit with "Return".

4.3. System Settings:

In standby mode, long press the "M" button to enter the main menu, then navigate to "System Settings".

• Storage Location: Select "FLASH/TF" (internal flash memory or external TF card).
• Shutdown Settings:
  • Power Saving Shutdown: Set from 0 to 30 minutes. Device automatically shuts down after inactivity.
  • Timed Shutdown: Set from 0 to 99 minutes. Device automatically shuts down after the set time, saving recordings first if in recording mode.
• Screen Saver: Select "turn off screen/digital clock".
• Backlight Time: Set to "10 seconds/20 seconds/30 seconds/always on".
• Contrast Ratio: Adjust screen brightness using "+"/"-".
• Date and Time: Set "Set Time" and "Set Date" using "+"/"-" and "<<" / ">>" buttons.
• Language: Select from various languages including English, Japanese, German, French, Italian, Spanish, etc.
• Password Settings:
  • Enable/Disable "password switch".
  • Change "Password Change". Original password is "00 00 00 00".
  • Note: If enabled, a password is required every time the device is turned on or connected to a computer. If you forget your password, enter "18 18 18 18" and long press the "Back" button for more than 3 seconds to crack it.
• Disk Space: View available and total storage space.
• Format Device:
  • Select "Yes/No" to confirm formatting.
  • Warning: Formatting will delete all files. Back up data before proceeding.
  • Formatting is similar to formatting a computer hard disk (e.g., selecting "USB DISK").
• Factory Settings: Restore all settings to their default values.

5. File Management

Connecting to a Computer (USB Drive Function):

Connect the device to your computer using the provided USB data cable. The device will appear as a removable drive in your operating system. You can then copy, move, or delete MP3 and recording files.

Deleting Files:

On the playback interface, short press the "Delete" button to enter the "Delete Files" menu. Use "Previous song" (<<) and "Next song" (>>) to navigate, and "Play" to enter sub-menus.

• Single Delete: Select a specific file to delete.
• Delete All: Deletes all files on the device.

Note: Deleted files cannot be restored. Use this function with caution.

6. Power Management and Charging

The device uses a built-in lithium polymer battery. When the power indicator shows low battery, please charge the device promptly.

• Charging Method: Connect the device to a computer's USB interface using the included data cable. You can also use a dedicated charger.
• Recommended Charger: For optimal performance and longevity, use a 3C certified charger with specifications: 5V 500mAh.
• Charging Time: Approximately 3 hours for a full charge.
• Charging Indicator: While charging, the battery symbol on the screen will be rolling. Once fully charged, the battery symbol will stop moving.

7. Troubleshooting (FAQ)

Q1: The storage capacity displayed on the device is not the same as the nominal value.

A1: Computer systems use binary calculations (1KB = 1024 bytes, 1MB = 1024KB, 1GB = 1024MB), which results in a slight difference compared to the nominal capacity. Additionally, internal system files and fonts occupy a small portion of the memory, leading to a displayed capacity that is less than the advertised nominal value.

Q2: Why can't some songs be played on the device?

A2: The audio format of the songs may not be compatible with the device. Please ensure the audio files are in a supported format (MP3/WMA/WAV/FLAC/APE/OGG).

Q3: Why does the product's response speed slow down?

A3: Prolonged use or frequent file deletions can lead to fragmentation of the internal flash memory, similar to a hard disk, which slows down performance. Formatting the flash memory with professional software can often resolve this. If an MP3 file on the device is corrupted, it can also cause slowdowns.

Q4: What if the software inside this product is damaged?

A4: This is typically caused by abnormal operation. Please contact your local dealer or customer support for assistance.

8. Specifications

Recording Capacity (Approximate Hours):

9. User Tips

• If you experience charging issues, try using a 5V=1A plug and a different USB cable.
• For language support beyond the included English manual, contact customer service for a document version that can be translated.
• If the device's response speed slows down, consider formatting the internal memory using professional software. Remember to back up all important files before formatting.

10. Warranty and Support

For any issues not covered in this manual, or if you suspect software damage due to abnormal operation, please contact your local dealer or the Vandlion Official Store customer support for assistance.

You can find more information and contact details on the Vandlion Official Store page.