Prelingcar Digital Dashboard Cluster for Audi A6 A7

Contents

Prelingcar Digital Dashboard Cluster User Manual

For Audi A6 A7 (2012-2018)

1. Introduction

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your new Prelingcar 12.3 inch LCD Digital Dashboard Cluster. This product is designed for Audi A6 and A7 models manufactured between 2012 and 2018. Please read this manual thoroughly before installation and use to ensure proper functionality and to maximize your driving experience.

The digital dashboard cluster offers a new UI design, 1920*720 resolution, and SYNC display capabilities, enhancing both aesthetics and functionality in your vehicle.

Prelingcar 12.3 inch Digital Dashboard Cluster for Audi A6 A7 (2012-2018)

Image: The 12.3 inch Digital Dashboard Cluster, compatible with Audi A6 and A7 models from 2012-2018.

2. Safety Information

Always ensure the vehicle's ignition is off and the battery is disconnected before performing any installation or maintenance. Improper installation can lead to damage to the product or vehicle's electrical system. If you are unsure about any step, seek professional assistance.

3. Installation

3.1. Pre-Installation Requirements

  • Keep Original Buzzer: If your original car motherboard has a buzzer, it must be kept. Failure to do so may result in alarm sounds or other functions not working.
  • Keep Small Motherboard: If your old cluster includes a small motherboard, keep it as shown in the manual's image.
  • Non-Destructive Installation: The installation is designed to be non-destructive, meaning no cutting of wires, soldering, or drilling is required. It retains original car information functions and does not affect the original car warranty.
Non-destructive installation features: no unbroken line, solderless, no-drill, retaining original car information.

Image: Illustration of non-destructive installation, highlighting no wire cutting, no soldering, and no drilling.

3.2. Installation Video Reference

For a visual guide, refer to the installation video available on Google Drive: Installation Video. Search for your specific car model on this website for detailed installation and modification instructions.

3.3. HDMI Connection

To enable synchronized display features (rear camera, 360 camera, DVR, CarPlay), connect the digital cluster's HDMI port to an HDMI cable. Then, connect the HDMI cable to an HDMI exchange box, and finally, connect the HDMI exchange box to the USB port of your Android player. Once connected, open the digital cluster and navigate to the navigation interface. Press the down button to activate the function.

HDMI connection diagram for synchronized display, showing digital cluster, HDMI cable, HDMI exchange box, and Android player USB port.

Image: Diagram illustrating the HDMI connection process for synchronized display features.

4. Initial Setup

4.1. Speed Limit and Winter Tire Settings

Before installing the digital cluster, set the speed limit and turn off winter tires in your vehicle's original settings. Set the speed limit alarm to 250 km/h. If your original car does not have a speed limit or winter tire setting, this step is not necessary.

Dashboard display showing speed limit and winter tire settings.

Image: Digital dashboard displaying options for setting speed limits and managing winter tire settings.

4.2. Fuel Tank Calibration

If the fuel tank level displayed is inaccurate, first fill the tank completely. Then, proceed with the setup in the dashboard settings. Remember the value when the tank is full and input it into the system.

4.3. Car Type Setting

Go to the dashboard settings, select 'Car Type', and choose your specific car model. After selection, turn off the engine, cut power, lock the car, and wait for 5 minutes before restarting. The system should then function correctly.

4.4. LHD/RHD Configuration

If your vehicle is Right-Hand Drive (RHD), go to the configuration settings and adjust it to either LHD or RHD as appropriate.

4.5. Language Selection

Navigate to the settings menu and select 'Language Setting'. The system supports 14 different languages, including English, Russian, German, French, Spanish, Italian, Korean, Japanese, Arabic, and Turkish.

Dashboard display showing multi-language support and language selection menu.

Image: Digital dashboard showing the multi-language selection interface.

5. Operating Instructions

5.1. Dashboard Features

The digital cluster supports displaying original vehicle information such as Miles/KM, band pressure, oil/water temperature, oil pressure, fuel consumption, and auto body balance.

5.2. Display Modes and Themes

You can choose from 3 or 4 different display modes (Simple, Comfort, Technology, Track) and 4 theme colors. The UI design is compatible with Audi A8's new UI style, offering a simpler and more beautiful overall interface.

New Audi A8 UI Style display options for the digital dashboard.

Image: Various UI layouts available, inspired by the new Audi A8 UI style.

5.3. CarPlay and Android Auto

The system supports wireless CarPlay and Android Auto. To connect, go to the 'CarPlay' option. Once connected, press down to access a menu for adjusting the display region or switching devices. If you have an Android phone, select Android Auto for direct Bluetooth connection.

Wireless CarPlay and Android Auto functionality with phone integration.

Image: Demonstrates wireless CarPlay and Android Auto connectivity.

5.4. Trip Data Management

To manage trip data, go to 'Travel Data' in the settings, press OK, and select 'Reset Trip' then OK to clear trip information.

5.5. Radio Display Zone

In the settings, navigate to 'Preference' then 'Zoom Radio'. Press OK to set the radio display zone from 1.0 to 0.** as desired.

5.6. Vehicle Control

The digital cluster supports control using the original vehicle's steering wheel buttons, enhancing comfort and ease of use.

Steering wheel control buttons for the digital cluster.

Image: Steering wheel with control buttons for the digital cluster, indicating Bluetooth connectivity.

5.7. Product Overview and UI Demonstration Video

Video: A comprehensive demonstration of the digital dashboard's user interface, settings, and various features in action, including different display modes and synchronized content.

6. Settings and Customization

6.1. Speed Calibration

In the dashboard settings, navigate to 'Calibration Settings' and select the second item. Enter the difference between the displayed speed and the actual speed to calibrate the average speed value.

6.2. Consumption Calibration

In the dashboard settings, go to 'Calibration Settings' and select the third item. Change the setting to 'Manual' and enter the difference between the actual consumption and the displayed consumption to calibrate the average consumption value.

6.3. Preference Settings

Access the 'Performance' section in the settings to configure various preferences, including:

  • Voltage display frequency
  • Reverse left and right display
  • Width indicator light
  • Move up and down / left and right adjustments
  • Zoom ratio
  • Time Source (Original car)
  • Race mode
  • Boot Sound
  • Tire pressure display
  • Check MIL (Malfunction Indicator Lamp)
  • Phone mirror
  • OBD Silence

6.4. Unit Settings (PQ Platform)

For PQ platform vehicles, you can set various units, including temperature, pressure, time, distance, vehicle speed, volume, and consumption.

6.5. Physical Light Settings

Normally, the 'Physical Light' setting should be closed. It only needs to be opened for rare car models that have physical light in the digital cluster, allowing its activation.

7. Specifications

7.1. Digital Dashboard Cluster

  • Operating System: Linux
  • CPU: T5 1.5Ghz
  • Screen: 12.3 inch HD IPS
  • Resolution: 1920x720
  • Voltage: 9V-16V
  • Operating Current: 0.8A-1.5A
  • Standby Current: Less than 3MA
  • Startup Time: <2 seconds (Fast response, quick start)
  • Multilingual Support: English, Russian, German, French, Spanish, Italian, Korean, Japanese, Arabic, Turkish, etc.
  • Special Features: 12.3 inch LED digital display
  • Placement on Vehicle: Dashboard
  • Material: ABS
  • Country/Region of Manufacture: China (Mainland China)
  • OEM NO.: For Audi A6 A7 2012-2018 Years

7.2. Android Player (Optional/Combined)

  • CPU: QUAD CORTEX-A53, 2.0GHZ
  • GPU: IMG GE8300GPU
  • RAM: DDR3: 2GB
  • Storage: 4G+64G, 8G+128G (optional)
  • System: Pure Android 13.0
  • Audio: Built-in LM DSP, 32GEQ band for effective EQ sound setting
  • Connectivity: Wireless CarPlay (via USB port, Siri voice control), 4G LTE internet, 5G WiFi, Bluetooth 5.0
  • Output: Video output for headrest monitors, optical fiber interface output with RDS
  • Video Format: Supports 4K VIDEO format for high-resolution display
  • USB Ports: Supports 2 USB port cables
  • Radio: AM/FM radio with built-in RDS function
  • Applications: Supports downloading various apps (e.g., YouTube, Facebook, Netflix, TikTok)
  • Browsing: Supports browsing via WiFi hotspot or 4G LTE internet

7.3. Physical Dimensions and Environmental Resistance

  • Item Length: 40 cm
  • Item Width: 30 cm
  • Item Height: 20 cm
  • Item Weight: 3.5 kg
  • Temperature Resistance: Resistant to high temperatures up to 80°C and low temperatures down to -40°C.
Automotive Grade Chip resistant to extreme temperatures.

Image: Illustration of the automotive-grade chip's resistance to high (80°C) and low (-40°C) temperatures.

8. Maintenance

To ensure the longevity and optimal performance of your digital dashboard cluster, follow these guidelines:

  • Keep Original Components: As mentioned in the installation section, it is crucial to retain the original car motherboard buzzer and small motherboard if your vehicle's original cluster had them. These components are essential for the proper functioning of alarms and other features.
  • General Care: Keep the screen clean using a soft, lint-free cloth. Avoid using harsh chemicals or abrasive materials that could damage the display.
  • Software Updates: Periodically check for any available software updates to ensure you have the latest features and bug fixes.

9. Troubleshooting

  • Alarms or Functions Not Working: If alarm sounds or other functions are not working, verify that the original car motherboard buzzer was kept and properly connected during installation.
  • Inaccurate Fuel Tank Level: If the fuel tank level is inaccurate, ensure the tank was filled completely before calibration. Re-calibrate the fuel tank settings as described in Section 4.2.
  • Speed/Consumption Display Discrepancies: If there's a difference between the displayed and actual speed or consumption, perform the respective calibration steps (Section 6.1 and 6.2) to correct the values.
  • Physical Light Not Activating: The 'Physical Light' setting (Section 6.5) is typically off. Only activate it if your specific car model has physical light integrated into the digital cluster.

10. User Tips

  • Confirm Compatibility: Before purchasing or installing, double-check that the digital dashboard cluster is compatible with your specific Audi A6 or A7 model year (2012-2018).
  • Utilize Support: If you encounter any issues or have questions, reach out to the manufacturer's support. Users have reported excellent and helpful assistance, even across different time zones.
  • Explore Customization: Take advantage of the multiple display modes, themes, and unit settings to personalize your driving experience.

11. Warranty and Support

For further assistance, you can refer to the official user manual PDF: User Manual (PDF).

The manufacturer offers one-on-one technical guidance to ensure worry-free after-sales service. If you have specific language requirements not listed, contact support, and they may develop the system language you need.

Service Upgrade: One-on-one technical guidance, fast delivery, free gifts.

Image: Details on service upgrade, including one-on-one technical guidance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.