DNXT NR800

Contents

DNXT NR800 5G CPE Industrial Modem Outdoor Router

User Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your DNXT NR800 5G CPE Industrial Modem Outdoor Router. The NR800 is a high-performance wireless router designed for industrial applications, offering 5G/4G/3G network connectivity, Wi-Fi 6 support, and multiple LAN ports. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Package Contents

Please check the package contents carefully. If any items are missing or damaged, contact your vendor.

  • DNXT NR800 5G CPE Industrial Router
  • 6 External Antennas
  • Power Adapter (Type-C 12V 1A)
  • User Manual (This document)

3. Product Overview

3.1 Device Layout

Front view of the DNXT NR800 5G CPE Industrial Router with six external antennas and front panel indicators.
Figure 3.1: Front View of the NR800 Router

The image displays the front of the DNXT NR800 router, featuring six external antennas (four on top, two on the side) and a front panel with LED indicators for network status.

3.2 Ports and Indicators

Rear view of the DNXT NR800 5G CPE Industrial Router showing power input, LAN ports, SIM card slot, and USB port.
Figure 3.2: Rear View of the NR800 Router

This image shows the rear panel of the NR800 router, detailing the power input, four LAN ports, a SIM card slot, and a USB port.

Top view of the DNXT NR800 5G CPE Industrial Router with labeled indicators and ports.
Figure 3.3: Top View of the NR800 Router

The top view highlights the various ports and indicators, including RST (Reset), DC-12V (Power Input), LAN1-LAN4, SIM card slot, and USB. LED indicators for WiFi, NET, LET, and 5G are also visible.

The DNXT NR800 router features the following components:

  • External Antennas: Six high-gain antennas for enhanced signal reception and transmission.
  • RST (Reset) Button: Used to reset the device to factory settings.
  • DC-12V Power Input: Connects to the provided power adapter.
  • LAN Ports (LAN1-LAN4): Four Gigabit Ethernet ports for wired network connections.
  • SIM Card Slot: Supports one SIM card for 5G/4G/3G cellular connectivity.
  • USB Port: For potential future expansion or specific functionalities.
  • LED Indicators:
    • WiFi: Indicates Wi-Fi status.
    • NET: Indicates general network activity.
    • LET: Indicates LTE (4G) network connection status.
    • 5G: Indicates 5G network connection status.

4. Specifications

FeatureDescription
ModelNR800
ChipsetUNISOC UDX710
Network Support5G/4G/3G
5G Bands (NR800-Europe)n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n77/n78
4G LTE Bands (NR800-Europe)B1/B3/B5/B7/B8/B20/B28/B38/B39/B40/B41/B42/B43
Wi-Fi StandardWi-Fi 6 (802.11b, 802.11g, 802.11n, 802.11ac, WiFi 802.11 ax)
Wi-Fi Supported Frequency2.4GHz & 5.8GHz
Max. LAN Data Rate1900Mbps
2.4G Wi-Fi Transmission Rate1200 Mbps
Wi-Fi Support Rate (Down/Up-link)150Mbps / 50Mbps
Antennas6 External Antennas
LAN Ports4
WAN Ports4
SIM Card Slot1 SIM Card Support
Weight900g
Power InputType-C 12V 1A
Transmission DistanceDefault coverage radius 150m (open environment)
Shared UsersUp to 16 users
System CompatibilityWindows/XP/Vista/7/8/10, OS/Android/Linux
FunctionsFireWall, VPN, Supports WPS
Encryption TypeWPA2-PSK
Metal ShellYes, for anti-interference shielding.

5. Setup Instructions

5.1 Antenna Installation

  1. Carefully screw the six external antennas onto their respective connectors on the router.
  2. Ensure they are securely tightened but do not overtighten.
  3. Adjust the antennas for optimal signal reception, typically pointing them upwards or slightly angled.

5.2 SIM Card Insertion

Diagram showing how to insert a SIM card into the router's SIM card slot.
Figure 5.1: SIM Card Insertion

The diagram illustrates the correct orientation for inserting a SIM card into the designated slot on the router's rear panel.

  1. Locate the SIM card slot on the rear panel of the router.
  2. Insert your activated 5G/4G SIM card into the slot with the correct orientation (refer to Figure 5.1).
  3. Push the SIM card gently until it clicks into place.

5.3 Power Connection

  1. Connect the provided Type-C power adapter to the DC-12V power input port on the router.
  2. Plug the other end of the power adapter into a suitable power outlet.
  3. The router will power on automatically, and the LED indicators will light up.

5.4 Wired Network Connection (Optional)

Diagram showing how to connect an Ethernet cable to a LAN port on the router.
Figure 5.2: LAN Port Wired Access

This image demonstrates connecting an Ethernet cable to one of the router's LAN ports for a wired network connection.

  1. If you wish to connect a device via a wired connection, use an Ethernet cable.
  2. Connect one end of the Ethernet cable to one of the LAN ports (LAN1-LAN4) on the router.
  3. Connect the other end of the Ethernet cable to the Ethernet port of your computer or other network device.

6. Operating Instructions

6.1 Initial Power-On and Network Acquisition

  1. After connecting the power, wait for the router to boot up. This may take a few minutes.
  2. Observe the LED indicators:
    • The NET indicator should light up, indicating network activity.
    • The LET or 5G indicator will light up solid when a successful 4G or 5G cellular connection is established, respectively.
  3. If the 5G/LET indicator does not light up, ensure your SIM card is active and correctly inserted, and that you are within cellular network coverage.

6.2 Connecting to Wi-Fi

  1. On your Wi-Fi enabled device (smartphone, laptop, etc.), search for available Wi-Fi networks.
  2. Locate the Wi-Fi network name (SSID) of your DNXT NR800 router. The default SSID and password are usually printed on a label on the bottom or back of the router.
  3. Select the network and enter the Wi-Fi password (WPA2-PSK).
  4. Once connected, your device should have internet access through the router's cellular connection.

6.3 Accessing the Router's Web Interface

For advanced settings and configuration, you can access the router's web-based management interface:

  1. Ensure your device is connected to the router via Wi-Fi or an Ethernet cable.
  2. Open a web browser and enter the default IP address of the router (e.g., 192.168.1.1 or 192.168.0.1). This information is typically found on a label on the router or in the quick start guide.
  3. Enter the default username and password (also usually on the router label).
  4. From the web interface, you can configure Wi-Fi settings, network modes, firewall rules, VPN, and other advanced features.

7. Maintenance

  • Cleaning: Regularly clean the router with a soft, dry cloth. Do not use liquid or aerosol cleaners.
  • Placement: Place the router in a well-ventilated area, away from direct sunlight, heat sources, and moisture. The metal shell provides anti-interference shielding, but proper placement still aids performance.
  • Firmware Updates: Check the manufacturer's website periodically for firmware updates. Keeping the firmware updated ensures optimal performance and security.
  • Resetting: If the router experiences persistent issues, you can perform a factory reset by pressing and holding the RST button for approximately 10 seconds while the device is powered on. Note that this will erase all custom settings.

8. Troubleshooting

8.1 No Internet Connection

  • Check SIM Card: Ensure the SIM card is correctly inserted and activated with a data plan.
  • Check LED Indicators: Verify that the NET and 5G/LET indicators are lit solid, indicating a successful cellular connection.
  • Antenna Position: Adjust the external antennas to improve signal reception.
  • Reboot Router: Power off the router, wait 30 seconds, then power it back on.
  • Network Coverage: Confirm that you are in an area with adequate 5G/4G cellular network coverage.

8.2 Slow Wi-Fi Speed

  • Signal Strength: Move closer to the router or reposition it to minimize obstructions.
  • Interference: Keep the router away from other electronic devices that might cause interference (e.g., microwaves, cordless phones).
  • Number of Users: The router supports up to 16 users. Excessive connected devices or high bandwidth usage can affect speed.
  • Channel Congestion: If possible, change the Wi-Fi channel in the router's web interface to a less congested one.

8.3 Cannot Access Router Web Interface

  • IP Address: Ensure you are using the correct default IP address (e.g., 192.168.1.1).
  • Connection: Verify your device is connected to the router's Wi-Fi or via an Ethernet cable.
  • Firewall/Antivirus: Temporarily disable any firewall or antivirus software on your computer that might be blocking access.
  • Browser Cache: Clear your web browser's cache and cookies, or try a different browser.

9. User Tips

No specific user tips are available from customer reviews or Q&A at this time. However, general best practices for routers include:

  • For optimal Wi-Fi performance, place the router in a central location, elevated, and away from large metal objects or thick walls.
  • Regularly change your Wi-Fi password to a strong, unique one to enhance security.
  • Consider using the wired LAN ports for devices that require stable, high-speed connections, such as desktop computers or gaming consoles.

10. Warranty and Support

The DNXT NR800 5G CPE Industrial Modem Outdoor Router comes with a 12-month warranty from the date of purchase.

For technical support, warranty claims, or any product-related inquiries, please contact your vendor or the manufacturer using the following details:

  • Whatsapp: +86 18817769642
  • Email: 836661924@qq.com

Please have your product model (NR800) and purchase details ready when contacting support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.