SKYFAME Car 16pin Wiring Harness Adapter with Canbus Box Decoder User Manual

1. Product Overview

The SKYFAME Car 16pin Wiring Harness Adapter with Canbus Box Decoder is designed to facilitate the installation of aftermarket car audio and navigation systems, particularly Android solutions, in compatible vehicles. This harness ensures a seamless connection without the need for cutting original vehicle wires, offering a plug-and-play installation experience.

The product has undergone rigorous testing to ensure 100% electrification performance and reliability.

Compatible Models:

• Hyundai Rohens Genesis Coupe 2012

CANbus Box Details:

• Brand: OUDI (OD)
• Model: OD-HY-18
• Config Patch: OUDI(OD)\Hyundai KIA Fully compatible or RAISE(RZC)\HYUNDAI\IX45

Figure 1: Overview of the SKYFAME Wiring Harness and Canbus Box.

Figure 2: Close-up of the Canbus box label (Model OD-HY-18).

2. Installation Guide

Installation of this wiring harness is designed to be straightforward, following the original vehicle's standard design for a plug-and-play experience. No wire cutting is required.

2.1 Safety Precautions

• Always disconnect the vehicle's battery before starting any electrical installation.
• Ensure all connections are secure to prevent short circuits or loose contacts.
• It is highly recommended to seek assistance from experienced professional installers or local automotive multimedia modification shops for installation.
• If self-installation is undertaken, evaluate your own operating skills and strictly follow standard operating procedures.

2.2 Wiring Diagram and Connections

Refer to the detailed wiring diagram below for proper connection of the harness to your Android head unit and vehicle's existing wiring. The main power line interface is a 16-pin connector.

Figure 3: Application Scenario and Wiring Diagram for Android Head Unit.

The diagram illustrates connections for:

• Main Power Line: 16-pin connector to the Android head unit.
• CANbus Box: Connects to the main harness to decode vehicle data.
• Radio Antenna: Connect the vehicle's radio antenna to the head unit.
• USB: Connect USB cables for data transfer or charging.
• SPDIF: Digital audio output (if applicable).
• GPS Navigation Antenna: Connect the GPS antenna for navigation functionality.
• Reverse Video Input Cable: For connecting a reverse camera.
• 4G Antenna: For internet connectivity (if applicable).
• RCA Cables: For audio/video input/output (e.g., FL+, FL-, FR+, FR-, RR+, RR-, RL+, RL-).
• Vehicle Signals: KEY1, KEY2 (steering wheel controls), REVERSE, BRAKE CTL, AUTO ANT, ILL (illumination), ACC (accessory power), BATT (battery constant power), GND (ground).

Figure 4: Pinout Diagram for the 16-pin Main Power Connector.

3. Operating Instructions

After physical installation, proper configuration of the Android head unit is essential for the CANbus box to function correctly.

3.1 CANbus Configuration

1. Power on your Android head unit.
2. Navigate to the factory settings menu on the Android host. (The access method for factory settings may vary by head unit manufacturer; consult your head unit's manual if needed).
3. Locate the car bus configuration menu.
4. Select the corresponding CANbus brand (OUDI or RAISE) and model (OD-HY-18 or IX45) as specified for your vehicle.
5. It is recommended to update the latest MCU and configuration file for the Android head unit when connected to Wi-Fi to ensure optimal compatibility and performance.

3.2 General Operation

Once configured, the wiring harness and CANbus box will enable the Android head unit to receive power, audio signals, and vehicle data (such as steering wheel controls, reverse gear detection, etc.) from your car's system. Operate your Android head unit as per its own user manual.

4. Maintenance

The SKYFAME wiring harness and Canbus box are designed for durability and require minimal maintenance. To ensure longevity and reliable performance:

• Keep the connections clean and free from dust or moisture.
• Avoid exposing the components to extreme temperatures or direct sunlight for prolonged periods.
• Do not attempt to modify the wiring harness or Canbus box, as this may void the warranty and cause damage.

5. Troubleshooting

If you encounter issues during or after installation, consider the following troubleshooting steps:

• No Power to Head Unit: Double-check all power connections (BATT, ACC, GND) and ensure the vehicle's battery is properly connected. Verify the 16-pin connector is fully seated.
• No Sound: Check RCA audio connections and ensure the head unit's audio settings are correctly configured.
• Steering Wheel Controls Not Working: Re-verify the CANbus configuration in the Android head unit's factory settings. Ensure the correct CANbus brand and model are selected. Check KEY1 and KEY2 connections.
• Reverse Camera Not Activating: Confirm the REVERSE signal wire is correctly connected and the camera itself is functional.
• Intermittent Issues: Ensure all connectors are firmly seated and there are no loose wires.
• Software/Compatibility Issues: Ensure your Android head unit is running the latest MCU and configuration files. Update via Wi-Fi if necessary.

If problems persist, it is advisable to consult with a professional installer or contact SKYFAME customer support.

6. Specifications

Figure 5: Harness length measurement.

A detailed user manual in PDF format is also available for download: User Manual (PDF).

7. Warranty and Support

All SKYFAME products come with a one-year warranty against manufacturing defects. In case of any defects, we can negotiate to resend necessary accessories for repair, depending on the situation.

For any problems encountered during use, please provide feedback in the form of videos and pictures. Our support team aims to reply within 12 hours to assist you.

SKYFAME Electronics Co., Ltd. is committed to providing high-quality automotive electronic products and excellent customer experiences.

8. User Tips

• Professional Installation: For best results and to avoid potential issues, professional installation is strongly recommended.
• CANbus Configuration: Always ensure the correct CANbus brand and model are selected in your Android head unit's factory settings after installation.
• Software Updates: Keep your Android head unit's MCU and configuration files updated to the latest versions for optimal compatibility and feature support.
• Head Unit Compatibility: This harness is recommended for use with Android hosts featuring mainstream solutions such as TOPWAY, XYAUTO, NOWADA, and FTYTEK.

9. Product Video

Watch the official product video for an overview of SKYFAME automotive electronic products.