Akko x Veekos K75/5075S Mechanical Keyboard User Manual

Introduction

This manual provides detailed instructions for the Akko x Veekos K75/5075S mechanical keyboard. Designed for both gaming and typing, this 75% layout keyboard features hot-swappable switches, vibrant RGB backlighting, durable PBT keycaps, and a multi-function knob for enhanced control. Please read this manual thoroughly to ensure proper use and maintenance of your keyboard.

Note: The K75 is a product of Veekos, a sub-brand of AKKO. It shares the same shell and configuration as the 5075S, with differences primarily in color, keycaps, and logo.

Package Contents

• 1 x Akko x Veekos K75/5075S Mechanical Keyboard
• 1 x USB-C Cable
• 1 x Switch Puller
• 1 x User Manual (this document)

Product Features

• 75% Layout: Compact design with 82 keys, including a multi-function knob.
• Hot-Swappable: Supports 3/5-pin MX mechanical switches, allowing for easy customization without soldering.
• Gasket Mount Design: Combined with triple-layer foam (PORON, IXPE, EVA) for a "thocky," resonance-free, and consistent typing experience.
• Durable PBT Keycaps: Double-shot molded PBT keycaps for longevity and a premium feel.
• RGB Backlight: Per-key programmable RGB lighting with over 20 effects and music visualizer support (via PC controller). Features an extra side RGB light strip.
• Multi-Function Knob: Conveniently adjust brightness (dim/increase) and volume (raise/lower).
• Adjustable Height: Two-tier keyboard stands offer three different typing angles (5°, 7.5°, and 11°).
• Anti-Ghosting: Full-key N-Key Rollover ensures all simultaneous key presses are registered accurately.
• USB Type-C Connection: Provides reliable and instantaneous response.
• Programmable: Supports VeekosCloud Driver (K75) or AKKO Cloud Driver (5075S) for firmware updates, RGB customization, and key re-programming.

Setup Instructions

1. Unpack the Keyboard: Carefully remove the keyboard and all accessories from the packaging.
2. Connect the USB-C Cable:
   • Locate the USB Type-C port on the keyboard (usually on the top edge).
   • Connect one end of the provided USB-C cable to the keyboard.
   • Connect the other end of the USB-C cable to an available USB port on your computer (Desktop, Laptop, or Tablet).

   

3. Initial Power On: The keyboard should light up automatically upon connection.
4. Adjust Keyboard Height (Optional):
   • Flip the keyboard over to access the adjustable feet on the underside.
   • Extend the two-tier stands to your preferred angle: 5°, 7.5°, or 11°.

   

5. Driver Installation (Optional, for advanced customization):
   • For K75 model, download the VeekosCloud Driver from https://www.veekos.com/download/.
   • For 5075S model, download the AKKO Cloud Driver from the official AKKO website.
   • Install the driver software following the on-screen instructions. This software allows for RGB customization, key re-programming, and firmware updates.

   

Operating Instructions

Multi-Function Knob

The knob located on the top right of the keyboard provides quick control over various functions:

• Rotate Clockwise: Increases brightness or volume.
• Rotate Counter-Clockwise: Decreases brightness or volume.
• Press: Toggles between RGB control and volume control modes.

RGB Backlighting

• Default Effects: The keyboard comes with pre-programmed RGB lighting effects.
• Customization: Use the Veekos/AKKO Cloud Driver software to customize per-key RGB lighting, choose from over 20 effects, and enable music visualizer mode.

Hot-Swapping Switches

The keyboard supports hot-swappable 3/5-pin MX switches, allowing you to change switches without soldering.

1. Remove Keycap: Use the provided keycap puller to gently remove the keycap from the switch you wish to replace.
2. Remove Switch: Use the provided switch puller to carefully grip the switch and pull it straight up.
3. Insert New Switch: Align the pins of the new switch with the holes on the PCB. Gently press the switch down until it clicks into place. Ensure pins are not bent.
4. Replace Keycap: Place the keycap back onto the new switch.

Key Re-programming and Macros

Utilize the Veekos/AKKO Cloud Driver software to:

• Re-program individual keys.
• Create and assign macros for complex commands.
• Customize Fn key functions and Alt-Fn hotkeys.

Maintenance

• Cleaning Keycaps: Use a soft, damp cloth to wipe down PBT keycaps. For deeper cleaning, remove keycaps and wash with mild soap and water, ensuring they are completely dry before reattaching.
• Cleaning the Keyboard Body: Use a soft, dry cloth to wipe the keyboard body. Avoid using harsh chemicals or abrasive materials.
• Dust Removal: Use compressed air to remove dust and debris from between keycaps and switches.
• Cable Care: Avoid sharp bends or excessive pulling on the USB-C cable to prevent damage.

Troubleshooting

• Keyboard Not Responding:
  • Ensure the USB-C cable is securely connected to both the keyboard and the computer.
  • Try connecting the keyboard to a different USB port on your computer.
  • Test the keyboard on another computer to rule out system-specific issues.
  • If using a USB hub, try connecting directly to the computer.
• RGB Lights Not Working/Incorrect:
  • Check the keyboard's manual or software for RGB control shortcuts (e.g., Fn + keys).
  • Ensure the Veekos/AKKO Cloud Driver software is installed and up-to-date.
  • Verify that the RGB settings in the software are correctly configured.
• Keys Not Registering:
  • For hot-swappable switches, ensure the switch is fully seated and its pins are not bent. Remove and re-insert the switch if necessary.
  • Clean any debris around the affected key.
  • If a specific switch is faulty, replace it using the hot-swap feature.
• Multi-Function Knob Not Working:
  • Ensure the keyboard is properly connected.
  • Check if the knob is stuck or obstructed.
  • Verify software settings related to knob functionality.
• Driver Software Issues:
  • Reinstall the latest version of the Veekos/AKKO Cloud Driver from the official website.
  • Ensure your operating system is up-to-date.

Specifications

User Tips

• Experiment with Switches: Take advantage of the hot-swappable feature to try different switch types (linear, tactile, clicky) to find your preferred typing feel.
• Customize RGB: Dive into the driver software to create unique lighting profiles that match your setup or mood.
• Utilize the Knob: The multi-function knob is a powerful tool for quick adjustments; integrate it into your workflow for efficient control.
• Regular Cleaning: Keep your keyboard clean to maintain its aesthetic and ensure optimal performance, especially with PBT keycaps.

Warranty and Support

For warranty information and technical support, please refer to the official AKKO website or contact AKKO Official Store customer service. Disassembling the keyboard will immediately void the warranty.

The actual color may be slightly different from the pictures due to the different settings of devices. The structure diagram is for reference only; the actual product shall prevail.