Introduction
The NEWBOLER ODO039 GPS Cycling Computer is a waterproof device designed to provide accurate cycling data. It features multi-satellite positioning for enhanced accuracy, an LED backlight for visibility, and a long-lasting battery. This manual provides instructions for setup, operation, and maintenance of your cycling computer.
Setup
1. Initial Power On
Press and hold the power button for 2 seconds to turn the device on or off.
2. Satellite Acquisition
For normal function, the device requires satellite signal acquisition. When the satellite icon is flashing, it indicates the device is searching for satellites. A stationary satellite icon means satellites have been successfully found. Please ensure you are in an open outdoor area for optimal satellite search.
3. Bracket Installation
The NEWBOLER ODO039 is compatible with various brackets. Follow the instructions below for your specific bracket type.
Standard Bracket Installation
- Place the rubber rings around the handlebar.
- Position the bracket base on the handlebar, aligning it with the rubber rings.
- Secure the bracket base using the provided straps or zip ties, ensuring it is tight.
- Align the cycling computer with the buckle on the bracket.
- Gently press the computer onto the bracket.
- Rotate the computer to lock it securely in place.
Round Handle Extension Bracket Installation
- Place the gasket onto the extension bracket.
- Install the extension bracket onto the handlebar.
- Tighten the screws to secure the bracket.
- Align the cycling computer with the buckle on the bracket.
- Rotate the computer to lock it securely in place.
Carbon Fiber Integrated Bracket Installation
- Assemble the bracket components.
- Tighten the screws to secure the bracket parts.
- Remove the stand screw from your bike's stem.
- Install the carbon fiber integrated bracket onto the stem.
- Tighten the screw to secure the bracket.
- Align the cycling computer with the buckle on the bracket.
- Rotate the computer to lock it securely in place.
Operating Instructions
Power On/Off
Press and hold the power button for 2 seconds to turn the device on or off.
Navigating Functions
Use the arrow keys to navigate through different display functions:
- Press the Up arrow key to view sequentially: Total Distance, Total Time, Current Time, Clock, Calories.
- Press the Down arrow key to view sequentially: Current Speed, Maximum Speed, Average Speed.
Backlight Control
The device features a manual backlight. Press and hold the Up arrow button for 3 seconds to turn the backlight on or off. The backlight can also be set to be continuously on.
Automatic Shutdown
The device will automatically shut down after 20 minutes of inactivity to conserve battery life.
Clock Satellite Calibration
The clock automatically calibrates via satellite when the device is powered on and has acquired a satellite signal.
Maintenance
Waterproofing
The device offers daily life waterproofing. However, it is not 100% waterproof. Avoid prolonged soaking in rain or submerging the device in water to prevent damage.
Charging
The device is equipped with a TYPE-C charging port for fast charging. Use a compatible TYPE-C cable and power adapter to charge the device. The power display on the screen indicates the current battery level.
Troubleshooting
No Satellite Signal
If the satellite icon is flashing continuously and no data is displayed, ensure you are in an open outdoor area with a clear view of the sky. Buildings, dense foliage, or indoor environments can obstruct satellite signals.
Device Not Turning On
Ensure the device is sufficiently charged. Connect it to a power source using the TYPE-C cable and allow it to charge for at least 30 minutes before attempting to power it on again.
Inaccurate Speed/Distance Readings
Verify that the device has successfully acquired satellite signals (stationary satellite icon). If the issue persists, try resetting the device by holding the power button for an extended period (e.g., 10-15 seconds) or checking for any available firmware updates.
Specifications
| Feature | Detail |
|---|---|
| Product Name | GPS Cycling Code Table |
| Model Number | ODO039 |
| Dimensions (H x W x T) | 8.3 cm x 5.1 cm x 2.8 cm |
| Weight | 77.2 g (single gauge) |
| Material | PC+ABS |
| Charging Interface | TYPE-C |
| Backlight | Manual backlight / can be on continuously |
| Battery Capacity | 1200mAh |
| Working Time | About 28 hours |
| Screen Size | About 2.4 inches |
| Positioning Systems | Beidou, GPS, GLONASS, Galileo, QZSS (Five-star positioning) |
| External Devices | N (Not required for basic functions) |
| Touch Screen | N (No touch screen) |
User Tips
- For best GPS accuracy, start your ride in an open area to allow the device to quickly acquire satellite signals.
- If you plan to use data with third-party apps like Strava, check the product's official website or support documentation for information on data export capabilities and compatibility.
- Regularly check the battery level before long rides to ensure continuous tracking.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official NEWBOLER website or contact their customer service. A detailed user manual in PDF format is also available for download from the seller's product page for comprehensive instructions.
PDF User Manual: View User Manual (PDF)