1. Introduction
Thank you for choosing the DATA FROG Programmable Back Button Paddles Remap Kit. This accessory is designed to enhance your gaming experience by adding customizable back buttons and a Turbo burst function to your compatible controller. This manual provides detailed instructions for setup, operation, and maintenance.
Note: This device is primarily designed for PlayStation 4 (PS4, PS4 Pro, PS4 Slim) controllers. Compatibility with other console controllers (e.g., Xbox, Switch) is not guaranteed and may vary. Please verify compatibility before use.
2. Product Overview
The Back Button Paddles Remap Kit is a plug-and-play extension that attaches to the rear of your controller, providing two additional programmable buttons (M1 and M2) and a Turbo function. It features an ergonomic design for comfortable use during extended gaming sessions.
2.1 Components
- Back Button Attachment Unit
- User Manual
2.2 Key Features
- Custom Mapping: Program M1 and M2 buttons to replicate up to 10 different controller functions (Δ, 〇, ×, □, R3, L3, R2, L2, R1, L1).
- Turbo Burst Function: Enable rapid-fire for selected buttons, supporting up to 20 rounds per second.
- Ergonomic Design: Designed for comfortable grip and natural button access.
- Plug and Play: Easy installation without the need for additional software or drivers.
- No Audio Switching: Unlike some other products, this attachment does not interfere with audio output.
- Wireless Operation: Functions without requiring a data cable for the attachment itself.


3. Setup Instructions
The Back Button Paddles Remap Kit is designed for simple plug-and-play installation.
- Ensure your PS4 controller is powered off or disconnected from the console.
- Align the Back Button Attachment with the bottom port of your PS4 controller.
- Gently push the attachment until it securely clicks into place.
- Power on your PS4 controller. The device is now ready for programming.

4. Operating Instructions
4.1 Programming Function Settings (Button Mapping)
You can map up to 10 different controller functions to the M1 and M2 back buttons.
- Enter Programming Mode: Press and hold the SET button on the attachment for 2 seconds. The corresponding LED indicator will flash quickly (4Hz) to indicate programming mode.
- Select Back Button: Short press either the M1 or M2 button that you wish to program. The LED light on the corresponding function will illuminate.
- Select Target Function: Press the desired button on your PS4 controller (e.g., R1, L1, X, O, etc.) that you want to map to M1 or M2.
- Confirm Mapping: Press the SET button again to confirm the mapping. The LED indicator will stop flashing, and the new mapping will be saved.
- Repeat steps 1-4 for the other back button if desired.


4.2 Turbo Burst Function
The Turbo function allows for rapid, continuous input of a mapped button.
- Enable Turbo: While holding down the M1 or M2 button that you wish to apply Turbo to, press the TURBO button. The LED indicator for that button will light up, indicating Turbo is active.
- Disable Turbo: To disable the Turbo function, repeat the process: hold down the M1 or M2 button and press the TURBO button again. The LED indicator will turn off.
5. Specifications
| Feature | Detail |
|---|---|
| Color | Black |
| Dimensions (L x W) | 99.5 mm x 57 mm (approx. 3.9 in x 2.3 in) |
| Weight (Bare Metal) | 16.8 g |
| Weight (With Color Box) | 45.5 g |
| Material | ABS |
| Compatible Consoles | PS4, PS4 Pro, PS4 Slim |
| Additional Features | Turbo Burst (20 rounds/sec) |
| Package Dimensions (L x W x H) | 19 cm x 13 cm x 6 cm |

6. Troubleshooting
- Buttons not responding after attachment: Ensure the attachment is securely connected to the controller's bottom port. Try detaching and reattaching it.
- Mapping not saving: Make sure you press the SET button a second time to confirm the mapping after selecting the desired function.
- Turbo function not activating: Ensure you are holding down the M1 or M2 button while pressing the TURBO button to activate it. The LED should light up.
- Incompatibility with PS5: This product is specifically designed for PS4 controllers (PS4, PS4 Pro, PS4 Slim). It is NOT compatible with PS5 controllers. Attempting to force it onto a PS5 controller may cause damage to either the attachment or the controller.
7. User Tips
- Verify Compatibility: Always double-check that your controller model is a PS4 (original, Pro, or Slim) before attempting to attach the device.
- Practice Mapping: Take some time to experiment with different button mappings to find the most comfortable and effective setup for your preferred games.
- Utilize Turbo: The Turbo function can be particularly useful in games requiring rapid button presses, such as fighting games or shooters.
- Ergonomic Comfort: The ergonomic design is intended for long gaming sessions. Adjust your grip to find the most comfortable position for the back paddles.
8. Warranty & Support
For any product inquiries, technical support, or warranty information, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.