VDIAGTOOL VD31

Contents

VDIAGTOOL VD31 OBD2 Scanner User Manual

Model: VD31 | Brand: VDIAGTOOL

1. Introduction

The VDIAGTOOL VD31 is a versatile 3-in-1 multifunctional OBD2 scanner designed for comprehensive vehicle diagnostics. It integrates a car code reader, a car battery health tester, and an exclusive key fob battery tester into one compact and easy-to-use device. This tool empowers car owners and mechanics to quickly identify and clear engine fault codes, monitor real-time vehicle data, check I/M readiness for emissions tests, and assess battery health for both the vehicle and its key fobs. It supports all standard OBD2 protocols and is compatible with a wide range of vehicles manufactured from 1996 onwards.

VDIAGTOOL VD31 OBD2 Scanner with key battery test icon and feature highlights

Figure 1: VDIAGTOOL VD31 OBD2 Scanner

2. Safety Information

To ensure your safety and prevent damage to the device or vehicle, please carefully read and follow all instructions in this manual before use.

2.1 Safety Messages

Safety messages use standardized signal words to indicate hazard levels and prevent injuries or equipment damage:

  • DANGER: Will result in death or serious injury if ignored. Indicates an immediately life-threatening hazard.
  • WARNING: Could result in death or serious injury if ignored. Indicates a potentially dangerous situation.

2.2 Safety Instructions

This manual covers known safety hazards, but cannot anticipate all possible risks. You are responsible for ensuring safe operating conditions and procedures.

  • DANGER: Always ventilate the service area when the engine is running or use a building exhaust removal system if available. Carbon monoxide is odorless and deadly and can cause loss of consciousness or death.
  • WARNINGS:
    • Always conduct testing in a safe, controlled environment.
    • Wear ANSI-approved safety goggles during all operations.
    • Keep all objects away from moving or hot engine components.
    • Ensure proper ventilation to avoid toxic exhaust fumes.
    • Secure the vehicle in PARK (automatic) or NEUTRAL (manual) with the parking brake engaged.
    • Place wheel chocks and never leave the vehicle unattended during tests.
    • Exercise extreme caution around ignition systems where hazardous voltages are present.
    • Maintain an ABC-rated fire extinguisher within immediate reach.
    • Never connect/disconnect test equipment with ignition on or engine running.
    • Keep all test equipment clean, dry, and free from contaminants.
    • Never operate test equipment while driving - focus solely on testing.
    • Strictly follow the vehicle service manual's diagnostic procedures.
    • Verify full battery charge and secure DLC connections before testing.
    • Never place test equipment near the distributor due to EMI risks.

3. Product Features

The VDIAGTOOL VD31 offers a comprehensive set of features for vehicle diagnostics and maintenance:

  • 3-in-1 Multifunctional Design: Car Code Reader, Car Battery Tester, and Key Fob Battery Tester.
  • Engine Diagnostics: Read and clear Diagnostic Trouble Codes (DTCs), turn off Check Engine Light (CEL).
  • Live Data Stream: View real-time vehicle operating data with 4-in-1 graphing capabilities.
  • Freeze Frame Data: Capture snapshot data at the moment a fault occurred for accurate analysis.
  • I/M Readiness: One-click check for emissions readiness status to help pass smog tests.
  • Battery Health: Read real-time car battery voltage and test key fob battery levels.
  • Advanced Tests: On-board monitor test (Mode 6), EVAP system test (Mode 8), O2 sensor test, Component test function.
  • DTC Lookup: Built-in database of over 100,000 DTCs for quick code identification and repair guidance.
  • Vehicle Information: Read essential vehicle data such as VIN, CID, and CVN.
  • Data Management: Data playback and print support for professional analysis.
  • User-Friendly Interface: 2.8-inch TFT color display with intuitive menu navigation.
  • Multi-Language Support: English, Chinese, French, Spanish, German, Russian, Italian, Polish.
Overview of VD31's 3-in-1 features including key battery tester, car battery voltage, and full OBD2 functions

Figure 2: VD31 3-in-1 Features Overview

4. Getting Started (Setup)

4.1 Power Connection Methods

The VD31 code reader can be powered in three ways:

  1. Vehicle Power Connection (Recommended):
    1. Locate the vehicle's Data Link Connector (DLC), typically under the dashboard.
    2. With the ignition ON, connect the code reader to the DLC.
    3. The device will auto-power on.

    Important: Never use Type-C power during vehicle communication.

  2. Computer Connection (For Updates/Data Transfer):
    1. Connect the Type-C cable to the device and your computer.
    2. The device will auto-power on.
  3. Built-in 9V Battery (For Key Battery Check Only):
    1. Insert a fresh 9V battery into the compartment on the back of the device.
    2. The device will auto-power on when the battery is installed.

The DLC is a standardized 16-pin port used to connect diagnostic scan tools to your vehicle's onboard computer.

  • Most vehicles: Within 12 inches of the dashboard center, typically under or near the driver's side.
  • Some Asian/European models: Behind the ashtray (may require removal for access).
  • If not visible: Check for a location label or consult the vehicle's service manual.
Diagram showing typical OBD2 DLC locations: left corner of dash, near center of dash, behind ashtray.

Figure 3: Typical DLC Locations

4.3 Device Button Layout Explained

Familiarize yourself with the device's control buttons:

Diagram of VD31 device with numbered buttons and their functions

Figure 4: VD31 Device Button Layout

  • 1. 2.8 Inch LCD Screen: Main display for information.
  • 2. Up Button: Menu navigation up, previous page in multi-screen info, edits DTC characters.
  • 3. Shutdown Button: Short press to power on; long press (3s) to power off.
  • 4. Right Button: Next page in multi-screen info.
  • 5. Key Battery Button: Direct access to key battery voltage measurement.
  • 6. Down Button: Menu navigation down, next page in multi-screen info, edits DTC characters.
  • 7. I/M Button: Checks emissions readiness and drive cycle status.
  • 8. Left Button: Previous page in multi-screen info.
  • 9. ESC Button: Returns to previous screen (press once to exit other tests).
  • 10. LED For Different DTC Types: Visual indicators for diagnostic status.
  • 11. OK Button: Confirms selection.

5. Operating Instructions

5.1 OBDII/EOBD Functions

When you select the OBDII/EOBD application from the home screen, your vehicle's diagnostic information will display. Press OK to access the diagnostic menu with these available tests:

  • Read DTC: Check stored fault codes in the vehicle's control modules. Available code types include Stored DTCs, Pending DTCs, Permanent DTCs, and Record DTC.
  • Clear DTC: Clear stored diagnostic trouble codes from the vehicle's ECU with the ignition ON (engine OFF).
  • Live Data: Real-time monitoring of vehicle sensor data and system parameters (PIDs). Options include: View All Items, Select Items, View Graphic Items, Record All, and Record Select.
Live data stream showing engine RPM, load, fuel trims, and O2 sensor data

Figure 5: Live Data Graphing

  • Freeze Frame: Provides a snapshot of critical vehicle parameters recorded at the moment a fault code was triggered.
  • MIL Status: Shows Check Engine Light status, run time with CEL on, and distance since CEL on.
  • Vehicle Information: Retrieves VIN, calibration IDs (CVNs).
  • O2 Sensor: Tests available for checking the integrity of oxygen sensors.
  • On-Board Monitoring (Mode 6): Receives test results for emission-related powertrain components.
  • EVAP System Test (Mode 8): Allows control of vehicle components for system tests, preventing fuel vapor escape.
  • I/M Readiness: Checks the status of a vehicle's OBD system's readiness for emissions testing.
VD31 screen showing I/M Readiness status with various monitor checks

Figure 6: I/M Readiness (Smog Check)

5.2 Battery Functions

  • Car Battery Voltage Test: Provides real-time battery voltage monitoring.
VD31 displaying car battery voltage at 12.1V, indicating good status

Figure 7: Car Battery Voltage Test

  • Key Fob Battery Check: Test the battery level of your vehicle's key fob.
VD31 testing a car key fob battery, showing 90% charge

Figure 8: Key Fob Battery Test

New Key Identification Methods:

  • Brand Selection: For more accurate testing, select your vehicle brand directly.
  • Automatic Scan: Position the key in the device's top-left sensing area and press the key function button every 3 seconds until a success message appears.
  • Frequency Selection: Adjust frequency value using UP/DOWN and LEFT/RIGHT buttons, then press OK to confirm.

Test The Store Key:

Successfully tested keys are automatically saved in the stored key menu for future testing.

5.3 DTC Lookup

Provides instant access to the built-in diagnostic trouble code database. To search for DTC definitions:

  1. Select "DTC Lookup" from the main menu.
  2. Enter the code using LEFT/RIGHT to navigate character positions and UP/DOWN to change digit values. Press OK to confirm.
  3. View the code definition.

5.4 Settings

Customize the code reader's configuration:

  • Language: Select display language.
  • Unit of Measure: Choose metric/imperial units.
  • Self Tests: Run device self-tests (Keys Test, TFT Test, LED Test).
  • Help: Access device information.
  • Beep: Turn beep sound on or off.

5.5 Review

Access all recorded diagnostic data through menu options like Review DTC, Review Datastream, Review Freeze Frame, Delete DTC Data, Delete Datastream, and Delete Freeze Frame.

5.6 Updating Software

To update the code reader's software:

  1. Download and install the VD31 Update Client from www.vdiagtool.com/support/downloads.
  2. Launch the VD31 Update Client.
  3. With the device powered off, hold the Down button while connecting via USB-C until "UPDATE MODE" appears.
  4. Click "Upgrade" in the client software and wait for completion.

5.7 Printing Data

This function transfers saved diagnostic data to your computer as a .txt file for printing.

  1. Open the VD30 Pro software and connect the device to your computer.
  2. Click "Print" in the software.
  3. On the device's Print page, select the required data.
  4. The device will send data to the computer software.
  5. Click "Open File" in the software to locate and print the report.
Screenshot of the VD31 update client showing printing instructions

Figure 9: Data Printing Interface

6. Maintenance

  • Cleaning: Keep all test equipment clean, dry, and free from contaminants. Use a soft, dry cloth for cleaning.
  • Software Updates: Regularly check for and install software updates to ensure optimal performance and compatibility with the latest vehicle models and diagnostic protocols. Refer to Section 5.6 for updating instructions.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

  • Codes Persist After Erasure: If diagnostic trouble codes (DTCs) persist after being cleared, this may indicate permanent DTCs. Repair or replace the affected components before attempting to clear the codes again.
  • "No Freeze Frame Data Stored": This message indicates that no freeze frame data was available at the time of the fault, or no fault has occurred to trigger a freeze frame capture.
  • I/M Readiness Yellow LED: A yellow LED indicates a possible problem. This could mean pending DTCs exist, or some emission monitors are not working properly. Check the I/M Readiness test result screen and use the Read Codes function for details. If no DTCs are present but the LED is yellow, it indicates a "Monitor Has Not Run" status.
  • I/M Readiness Red LED: A red LED indicates that problems exist with one or more vehicle systems, and the vehicle is not ready for an Emissions Test. DTCs are likely found. The MIL lamp on the vehicle's instrument panel will light steady. The underlying problem must be fixed before an Emissions Test or further driving.
  • Key Fob Battery Test Result is 0%: If the key is accidentally moved during the test, the result may temporarily show 0%. Reposition the key close to the sensing area and press a key function button (lock or unlock) to re-measure. Press OK to freeze the reading for stability.
  • DTC Definition Not Found: If a DTC definition is not found, especially for manufacturer-specific codes (P1xxx/C1xxx/B1xxx/U1xxx), ensure you have selected the correct vehicle make. If still not found, consult the vehicle's service manual.

8. Specifications

FeatureSpecification
Display2.8-inch TFT Color Screen
Operating Temperature0°C to 60°C (32°F to 140°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
ConnectionWired via main cable
Power SourceOBDII port connection, Type-C cable, or built-in 9V battery
CompatibilityOBDII & EOBD (12V) vehicles (US 1996+, EU 2003+, Asia 2008+)
Dimensions6.5 × 3.54 × 1.18 inches
Weight8.47 oz
Communication InterfaceOBD-II
Supported ProtocolsKWP200, ISO2000, ISO9141, J1850VPW
Software Version2025
Hardware Version2025
Free Update PeriodLifetime
Battery IncludedNo (for main operation, 9V battery for key fob test only)
Wireless Support/FunctionNo
CertificationCE, FCC
LanguagesEnglish, French, German, Italian, Polish, Russian, Spanish, Chinese

9. User Tips

  • Vehicle Safety: Always ensure the vehicle is parked safely with the parking brake engaged before performing any diagnostic tests.
  • Live Data Recording: If recording live data while driving, ensure a second occupant operates the device to maintain driver focus on the road.
  • Key Fob Test Accuracy: For stable key fob battery readings, press the OK button to 'freeze' the display once the key is positioned correctly.
  • I/M Readiness Check: The ignition must be ON (engine OFF) to accurately check I/M Readiness status.
  • Manufacturer-Specific Codes: When looking up manufacturer-specific DTCs, remember to select your vehicle's make for accurate definitions. If a definition is still not found, consult your vehicle's service manual.

10. Warranty & Support

10.1 Limited Three Years Warranty

The VDIAGTOOL VD31 is warranted against defects in materials and workmanship for three years (36 months) from the date of delivery to the buyer. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for a defective tool is repair or replacement.

10.2 Technical Support & Training Resources

For assistance, please utilize the following resources:

Video 1: VDIAGTOOL VD31 OBD2 Scanner Overview and Demonstration

11. Contact Information

For specific inquiries or partnerships:

Follow Us on Social Media

Stay connected with VDIAGTOOL for updates and community support:

  • Facebook Page: Search for "vdiagtool"
  • Facebook User Group: Search for "VDIAGTOOL OFFICIAL User Group"
  • Instagram: Search for "vdiagtool_official"
  • TikTok: Search for "vdiagtool_us"
  • YouTube: Search for "Vdiagtool Official"
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.