1. Introduction
The ANTUSI A2 Wireless Bike Alarm is a versatile anti-theft security system designed to protect your bicycle, motorcycle, electric vehicle, and other valuable assets. Featuring a high-volume alarm, IPX5 waterproof rating, and a convenient remote control, it provides reliable security and ease of use. This manual will guide you through the installation, operation, and maintenance of your new alarm system.

2. Specifications
| Feature | Detail |
|---|---|
| Model Number | A2 |
| Type | Electric Horn / Alarm |
| Alarm Sound Decibel | 115 dB (Effective Deterrence: 105-115dB) |
| Remote Control Distance | 0-80 meters |
| Waterproof Level | IPX5 |
| Material | PC Plastic + Engineering ABS |
| Alarm Battery Capacity | 400mAh (3.7V) Lithium Battery |
| Alarm Charging | USB Charging |
| Alarm Work Time | 3-6 Months |
| Alarm Standby Time | 6 Months |
| Remote Control Battery | 12V/27A Alkaline Battery |
| Size | 46mm x 43mm x 41mm |
| Certification | CE |
| Origin | Mainland China |
| Applicable Models | Bicycles, electric bicycles, electric vehicles, motorcycles, outdoor camping equipment, personal safety protection |

3. Installation
Follow these steps to install your ANTUSI A2 Wireless Bike Alarm and remote control:
- Remote Control Bracket Installation: Fix the remote control bracket accessories on the upper handle of your bicycle using the provided large rolled strips.
- Insert Remote Control: Insert the remote control into its fixed bracket.
- Remove Remote Control: To remove the remote control, press the bottom sliding part.
- Alarm Unit Mounting: Fix and tighten the main alarm unit to your desired location (e.g., seat post, frame) using a rolling mill (zip ties or similar) to secure it and reduce redundant strip position.
- Secure Alarm Unit: Insert the alarm unit (host) into its fixing bracket and tighten the screws for a secure fit.

4. Operation
4.1 Arming and Disarming
Use the remote control to arm and disarm the alarm. Refer to the remote control diagram for button functions:

- Lock Button: Press to arm the alarm. A short beep will confirm activation.
- Unlock Button: Press to disarm the alarm. A short beep will confirm deactivation.
- Bell Button: Press to activate the wireless bell function.
- Find Bike Button: Press to locate your bike. The alarm will sound, helping you find it from up to 80 meters away.
4.2 Alarm Activation
Once armed, the alarm will detect vibrations and movement. If triggered, it will emit a loud sound (115 dB) to deter potential thieves.

4.3 Multi-Application
The ANTUSI A2 alarm is designed for various applications beyond just bicycles and motorcycles. Its compact size and vibration sensor make it suitable for:
- Bicycles
- Electric Bicycles
- Electric Vehicles
- Motorcycles
- Doors (e.g., shed doors)
- Camping Equipment
- Personal Safety Protection (e.g., luggage at an airport)

4.4 Find Bike Function
If you forget where you parked your bike, simply press the 'Find Bike' button on your remote control. The alarm will sound, guiding you to its location within an 80-meter range.

5. Charging and Battery
5.1 Alarm Unit Charging
The alarm unit is equipped with a 400mAh (3.7V) lithium battery and is rechargeable via USB.
- First Use: Before the first use, please charge the alarm unit fully to activate it and ensure normal operation.
- Charging Cable: It is recommended to use the original 2A USB charging cable provided.
- Power Source: The charging cable can be connected to a computer USB port, a smartphone 5V2A adapter, or a mobile power bank for charging.
- Charging Indicator: The alarm unit has a charging indicator light to show its charging status.


5.2 Remote Control Battery
The remote control uses a 12V/27A Alkaline Battery. Replace the battery when the remote's range or responsiveness decreases.
6. Remote Control Pairing
One alarm host can be paired with up to three remote controls. The pairing process typically involves putting the alarm into a pairing mode (often by holding a button on the alarm or remote for a few seconds until an indicator light flashes or a sound is heard) and then pressing a button on the new remote control to link them. Please refer to the specific instructions provided with your product for detailed pairing steps, as this can vary slightly between batches.
7. Maintenance
- Cleaning: Wipe the alarm unit and remote control with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Water Exposure: While the alarm unit is IPX5 waterproof, avoid prolonged submersion in water. Ensure the USB charging port cover is securely closed when not charging.
- Battery Care: For optimal battery life, avoid completely draining the alarm unit's battery frequently. Recharge when the power display indicates low battery.
- Storage: Store the device in a cool, dry place when not in use for extended periods.
8. Troubleshooting
- Alarm not responding to remote:
- Check the remote control battery (12V/27A Alkaline Battery) and replace if necessary.
- Ensure the alarm unit is charged.
- Verify that the remote is within the 80-meter operating range.
- Re-pair the remote control with the alarm unit if connection is lost.
- Alarm not sounding or too quiet:
- Ensure the alarm unit is fully charged.
- Check for any obstructions blocking the speaker.
- Alarm unit not charging:
- Ensure the USB cable is properly connected to both the alarm unit and the power source.
- Try a different USB port or power adapter.
- Use the original 2A USB charging cable if possible.
- False alarms:
- Ensure the alarm is securely mounted and not subject to excessive vibrations from external sources (e.g., loose parts on the bike, strong winds).
- The sensitivity level might be adjustable (check product-specific settings if available, not explicitly mentioned in provided data).
9. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the retailer where you purchased the ANTUSI A2 Wireless Bike Alarm. Keep your proof of purchase for any warranty claims.