NEEWER Z3R

Contents

NEEWER Z3R 100Ws 2.4G TTL HSS Round Head Camera Flash Speedlite User Manual

Model: Z3R

1. Introduction

The NEEWER Z3R is a high-performance 100Ws 2.4G TTL HSS Round Head Camera Flash Speedlite designed for professional and enthusiast photographers. It offers versatile lighting solutions with its advanced features, including a sensitive touchscreen, multiple flash modes, and broad compatibility with various camera systems.

NEEWER Z3R Flash Speedlite with accessories
Figure 1: NEEWER Z3R Flash Speedlite and included accessories (diffuser, battery, USB-C cable, pouch).

2. Product Features

  • 100Ws Power Output: Provides ample power for various lighting scenarios.
  • 2.4G Wireless System: Built-in NEEWER Q System (TX/RX mode) and compatible with Godox 2.4G X System (RX mode).
  • TTL & HSS Support: Automatic exposure control (TTL) and high-speed sync up to 1/8000s.
  • Round Head Design: Delivers softer, more natural light.
  • 2.8" Full-Color Touchscreen: Intuitive interface for easy control and settings adjustment.
  • High Capacity Lithium Battery: 7.2V/3000mAh for up to 500 full power flashes.
  • Fast Recycling Time: 1.7s, or 0.8s with an external power box.
  • 3 LED Modeling Lights: Adjustable with 10 brightness levels for pre-visualization.
  • Multiple Flash Modes: TTL, Manual (M), and Stroboscopic (RPT) modes.
  • TCM Conversion Function: Converts TTL values to Manual power settings.
  • Zoom Range: Auto/Manual zoom from 28-105mm.
  • Multi-language Support: The touchscreen interface supports nine languages.
NEEWER Z3R Flash Speedlite features comparison
Figure 2: Comparison highlighting the Z3R's upgraded features including round lamp head, optimized flash tube, and 3 LED modeling lights.

3. Setup Guide

3.1. Battery Installation and Charging

  1. Ensure the flash is powered off.
  2. Locate the battery compartment on the side of the flash unit.
  3. Insert the 7.2V/3000mAh lithium battery, ensuring correct polarity.
  4. Close the battery compartment securely.
  5. To charge, connect the flash via its USB Type-C port to a compatible charger. The flash supports easy, seamless continuous charging.
NEEWER Z3R battery and charging features
Figure 3: High-performance lithium battery details, including USB-C charging and external power box option for faster recycling.

3.2. Mounting on Camera

  1. Slide the Z3R flash onto your camera's hot shoe mount.
  2. Secure the flash by tightening the locking mechanism on the hot shoe foot.
  3. The Z3R is compatible with Canon, Nikon, Sony, and FUJIFILM cameras.

3.3. Initial Power On and Language Selection

  1. Press and hold the power button to turn on the flash.
  2. Upon first use or after a reset, you may be prompted to select a language. Use the touchscreen to navigate and select your preferred language from the nine available options.

Video 1: Product demonstration showing the 2.8" full-color touchscreen and language selection.

4. Operating Instructions

4.1. Touchscreen Interface

The Z3R features a 2.8" full-color sensitive touchscreen for quick and intuitive control. Tap icons and swipe to navigate menus and adjust settings.

NEEWER Z3R touchscreen interface
Figure 4: The 2.8" full-color touchscreen interface, showing a one-click switch between TTL and M modes.

4.2. Flash Control Modes

  • TTL Mode: (Through-The-Lens) Provides precise automatic flashes based on ambient light conditions, ensuring optimal exposure.
  • M Mode: (Manual) Allows for precise control over flash output from 1/256 to 1/1 in 0.1 EV increments. Ideal for consistent lighting in controlled environments.
  • RPT Mode: (Stroboscopic) Fires a series of rapid flashes to capture multiple motions in a single picture, creating dynamic effects.
NEEWER Z3R flash control modes
Figure 5: Visual examples of TTL, M, and RPT flash control modes.

4.3. Wireless Functionality

The Z3R features a built-in 2.4G wireless system, supporting both NEEWER Q System (TX/RX mode) and compatibility with Godox 2.4G X System (RX mode).

  • Groups: Supports 4 groups (A, B, C, M).
  • Channels: 1-32 channels.
  • IDs: 1-99, OFF IDs.
  • Transmission Distance: Up to 328ft/100m.
  • Compatibility: Can function as a slave unit with Godox X-system transmitters (e.g., Xpro, X2T, X3). Firmware updates may be required for full compatibility.
NEEWER Z3R wireless system compatibility
Figure 6: Diagram illustrating NEEWER 2.4G Q System and Godox 2.4G X System compatibility.

4.4. High-Speed Sync (HSS)

The HSS feature allows the flash to synchronize with shutter speeds up to 1/8000s, effectively preventing overexposure in bright outdoor conditions and enabling wider apertures.

NEEWER Z3R High Speed Sync example
Figure 7: Example demonstrating the effect of 1/8000s High Speed Sync.

4.5. Modeling Lights

The Z3R is equipped with 3 LED modeling lights. These lights have a color temperature of 3300K±200K and offer 10 adjustable brightness levels, allowing you to pre-visualize your lighting setup.

NEEWER Z3R modeling lights and touchscreen
Figure 8: Details on the 3 LED modeling lights, 2.8" touchscreen, and magnetic spherical softbox compatibility.

5. Maintenance

5.1. Cleaning

To clean the flash unit, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or screen.

5.2. Battery Care

  • Always use the original or certified replacement battery.
  • Charge the battery fully before extended storage.
  • If storing for long periods, remove the battery from the flash unit and store it in a cool, dry place.
  • Avoid exposing the battery to extreme temperatures.

6. Troubleshooting

If you encounter any issues with your NEEWER Z3R flash speedlite, please consider the following general troubleshooting steps:

  • Flash not firing: Check battery level, ensure the flash is securely mounted on the hot shoe, verify camera and flash settings (e.g., flash mode, sync speed).
  • Inconsistent exposure: Review TTL settings or adjust manual power output. Ensure HSS is enabled if shooting at high shutter speeds.
  • Wireless connection issues: Check channel and ID settings on both the flash and transmitter. Ensure both units are within the effective transmission range.
  • Screen unresponsive: Try restarting the flash unit. If the issue persists, ensure the screen is clean and free from moisture.

For more detailed troubleshooting or persistent issues, please refer to the official NEEWER support resources or contact customer service.

7. Specifications

FeatureSpecification
ModelZ3R
Item TypeSpeedlite Flash
CompatibilityCanon, NIKON, Sony, FUJIFILM (via hot shoe); Neewer 2.4G Q System, Godox 2.4G X System (RX mode)
ApplicationPhotography/Portrait
Mounting PointHot shoe
Main MaterialPlastic
Dimensions8.5"x3"x3" / 21.5x7.5x7.5cm
Weight (including battery)1.42lb/643g
Power100Ws
Flash Output1/256 to 1/1
Battery Capacity3000mAh
Recharge Time2.5 Hours
Full Power Flashes500 Times
Burst Performance70-100 flashes (at Full Power)
Flash Duration1/180s - 1/20000s
Color Temperature6000K (±200K)
Recycle Time1.7s (0.8s with external power box)
Sync ModesHSS (1/8000s), Front Curtain, Rear Curtain Sync
Wireless FunctionMaster Unit Transmits Up to 100m, Slave Unit Receives Signal
Control MethodsButton, 2.8" Color Screen
Number of Modeling Lamps3
Modeling Lamp Brightness Levels10
NEEWER Z3R detailed specifications table
Figure 9: Detailed specifications for the NEEWER Z3R flash speedlite.

8. User Tips

  • Leverage the Touchscreen: The 2.8" full-color touchscreen makes adjustments quick and easy. Don't hesitate to explore its menus for advanced settings.
  • Experiment with Wireless: Utilize the 2.4G wireless system for off-camera flash setups. This can dramatically improve lighting quality and creativity compared to on-camera flash.
  • Use Modeling Lights: The 3 LED modeling lights are excellent for pre-visualizing how your light will fall on your subject before you take the shot. Adjust brightness to match ambient conditions.
  • Consider an External Power Box: For demanding shoots requiring rapid-fire flashes, an external power box can significantly reduce recycling time to 0.8s, ensuring you don't miss a shot.
  • Update Firmware: If you plan to use the Z3R with Godox X-system transmitters, ensure both units have the latest firmware for optimal compatibility and performance.

9. Warranty and Support

For warranty information, product support, or service inquiries, please refer to the documentation provided with your purchase or visit the official NEEWER website. You can also find a digital version of the user manual (PDF) for this product at this link.

If a paper instruction manual was not included in your packaging, please contact the seller to request a tutorial manual.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.