1. Introduction
Thank you for choosing the Devoko Electric Height Adjustable Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Important Safety Information
- Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or faulty.
- Keep children and pets away from the desk during operation to prevent injury.
- Do not place hands or other objects near the moving parts of the desk frame during height adjustment.
- Ensure the power cord is not pinched or damaged. Use only the provided power adapter.
- Do not overload the desk beyond its maximum weight capacity.
- Avoid spilling liquids on the control panel or motor components.
- For indoor use only.
3. Package Contents
Please check the package to ensure all items are included:
- Desk Top (1 piece)
- Desk Legs/Frame (2 pieces)
- Crossbar/Support Beam (1 piece)
- Feet (2 pieces)
- Control Box (1 piece)
- Control Panel (1 piece)
- Power Adapter & Cable (1 set)
- Cable Management Tray (1 piece)
- Headphone Hook (1 piece)
- Anti-slip Foot Pads (4 pieces)
- Assembly Hardware (screws, Allen keys, etc.)
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Desk Dimensions (L x W) | 160 cm x 70 cm (also available in 160 cm x 80 cm) |
| Height Adjustment Range | 71 cm - 119 cm |
| Maximum Load Capacity | 70 kg |
| Motor Voltage | 12V |
| Noise Level | < 50 dB |
| Installation Method | Assembly Required |
| General Use | Commercial Furniture |
| Specific Use | Office Desks |
| Package Weight | Approx. 22.34 kg |
5. Setup and Assembly
Assembly of the Devoko Electric Height Adjustable Desk typically involves the following steps. Refer to the included assembly guide for detailed, step-by-step instructions and diagrams.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts listed in Section 3 are present.
- Assemble Desk Legs: Attach the feet to the bottom of each desk leg using the provided screws.
- Connect Crossbar: Secure the crossbar/support beam between the two desk legs.
- Install Control Box and Motor: Mount the control box and motor assembly to the desk frame according to the instructions. Connect the motor cables to the control box.
- Attach Control Panel: Install the control panel to the underside of the desk top, usually on the front edge, and connect its cable to the control box.
- Mount Desk Top: Carefully place the desk top onto the assembled frame. Align the pre-drilled holes and secure the desk top to the frame using the provided screws.
- Install Accessories: Attach the cable management tray, headphone hook, and anti-slip foot pads as desired.
- Cable Management: Route all cables neatly using the cable management tray and grommets to prevent tangles and damage.
- Initial Power-Up: Plug the power adapter into the control box and then into a wall outlet. The desk may perform an initial calibration.
6. Operating Instructions
Your Devoko Electric Height Adjustable Desk features an intuitive control panel for easy height adjustments and memory presets.
6.1. Adjusting Desk Height
- To Raise: Press and hold the UP (^) arrow button. The desk will move upwards. Release the button when the desired height is reached.
- To Lower: Press and hold the DOWN (v) arrow button. The desk will move downwards. Release the button when the desired height is reached.
6.2. Setting Memory Presets
The control panel allows you to save two preferred height settings for quick adjustments.
- Adjust the desk to your desired height using the UP or DOWN buttons.
- Press the M button (if present, or a similar 'Set' button) once. The display may flash.
- Within a few seconds, press either the 1 or 2 button to save the current height to that preset. The display may confirm with a beep or a brief flash.
- To recall a saved height, simply press the corresponding 1 or 2 button. The desk will automatically move to the saved position.
7. Maintenance
- Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. Ensure the desk is unplugged before cleaning electrical components.
- Cable Management: Periodically check and reorganize cables to prevent tangles and ensure they do not interfere with the desk's movement.
- Fastener Check: Occasionally check all screws and fasteners to ensure they are tight. Retighten if necessary.
- Motor Inspection: Listen for any unusual noises during operation. If you notice any issues, refer to the troubleshooting section or contact support.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected; Overload; Motor error. | Check power connections. Reduce weight on desk. Unplug for 10 seconds, then plug back in to reset. |
| Desk moves unevenly. | Uneven load; Obstruction; Loose fasteners. | Distribute weight evenly. Check for obstructions. Tighten all assembly screws. |
| Memory presets not working. | Incorrect setting procedure. | Refer to Section 6.2 for correct procedure. Ensure you press 'M' then the preset number quickly. |
| Unusual noise during operation. | Obstruction; Loose components. | Check for anything caught in the lifting mechanism. Ensure all screws are tight. |
9. User Tips
- Verify Dimensions: The Devoko Electric Height Adjustable Desk is available in various sizes, including 160x70 cm and 160x80 cm. Always double-check the specific dimensions of the model you ordered to ensure it meets your needs.
- Cable Management: Utilize the included cable management tray and grommets to keep your workspace tidy and prevent cables from interfering with the desk's movement.
- Ergonomic Setup: Experiment with different height settings to find the most comfortable standing and sitting positions for your ergonomic needs. Use the memory presets to quickly switch between them.
10. Frequently Asked Questions (FAQ)
- Q: What are the exact dimensions of the desk?
- A: The Devoko Electric Height Adjustable Desk is available in different sizes. The primary model is 160 cm (length) x 70 cm (width). However, a 160 cm x 80 cm variant is also available. Please refer to your specific product order or packaging to confirm the exact dimensions of your desk.
- Q: How do I reset the desk if it stops moving?
- A: First, ensure all cables are securely connected and no obstructions are present. Try unplugging the desk from the power outlet for 10-15 seconds, then plug it back in. This often resolves minor electronic glitches.
11. Warranty and Support
Devoko products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact Devoko customer support directly. Keep your proof of purchase for any warranty claims.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Devoko customer service through their official channels.