PORIYA Automatic Roller Door Opener

1. Introduction

Thank you for choosing the PORIYA Automatic Roller Door Opener. This advanced system is designed to provide seamless control, enhanced safety, and effortless operation for your roller doors in households, commercial spaces, warehouses, and shops. Featuring a powerful 1200N motor, smart safety protocols, and versatile control options, this kit offers convenience and reliability. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

2. Important Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or property damage.

• Always ensure the area around the door is clear before operating the opener.
• Keep children and pets away from the door and operating controls.
• Do not allow children to play with the remote controls or wall button.
• Regularly inspect the door and opener for signs of wear or damage. Do not operate if damaged.
• In case of power failure, use the manual disengagement handle only when the door is fully closed or in a safe position.
• This opener is equipped with obstacle detection and auto-reverse features. However, always exercise caution.
• Only qualified personnel should perform electrical connections.

3. Package Contents

Verify that all items are present in your package:

• Roller Garage Door Opener: 1 unit
• Remote Controls: 2 units
• Wireless Wall Button: 1 unit
• User Manual: 1 unit
• Mounting Screws and Wall Anchors

Note: A27 12V Batteries for remotes/wall switch are not included and must be purchased separately.

4. Product Overview

The PORIYA Automatic Roller Door Opener features a robust design with intuitive controls and interfaces.

4.1. Control Panel Features:

• Digital Display: Shows current settings and status.
• CODE Button: Used for remote control learning.
• SET Button: For programming various settings.
• OSC Button: Open/Stop/Close function.
• UP Button: Moves the door upwards or navigates menu.
• DOWN Button: Moves the door downwards or navigates menu.

4.2. Manual Override Handles:

• Green Engage Handle: Pull to engage automatic mode after manual operation.
• Red Disengagement Handle: Pull to disengage the motor for manual door operation (e.g., during power failure).

4.3. External End Interface:

This port allows direct connection of auxiliary devices without requiring infrared sensors or wired wall switches.

• +24V: 24V DC power output.
• PE: Protective Earth.
• GND: Ground.
• PB: Push Button input.
• FL: Flashing Light output.
• BAT: Battery input (for backup power, if applicable).

5. Setup and Installation

This section guides you through the installation process. While designed for DIY installation, professional assistance is recommended for electrical work if you are unsure.

5.1. Mechanical Installation

1. Mounting the Opener: Securely mount the roller door opener to the wall or ceiling bracket near the roller door shaft. Ensure it is level and aligned with the door's rotation axis. Use the provided screws and anchors.
2. Connecting to Door Shaft: Attach the opener's drive mechanism to the roller door shaft according to the door manufacturer's instructions.

5.2. Electrical Connection

Connect the opener to a standard 220V AC power outlet. Ensure the power supply is stable and meets the opener's requirements.

5.3. Remote Control Pairing (CODE Learning)

1. Press and hold the 'CODE' button on the opener's control panel until the digital display shows 'L'.
2. Press any button on the remote control you wish to pair. The digital display will change, indicating successful pairing.
3. Repeat for additional remote controls.

5.4. Wireless Wall Button Setup

The wireless wall button operates similarly to the remote controls. Follow the remote control pairing steps (Section 5.3) to pair the wireless wall button with the opener.

5.5. Initial Limit Setting and Force Adjustment

Refer to the detailed manual included in your package for specific instructions on setting the door's open and close limits, and adjusting the force sensitivity. This is crucial for safe and proper operation.

6. Operating Instructions

6.1. Normal Operation

To operate the door, simply press the desired button on the handheld transmitter (remote control) or the wireless wall button. The door will automatically open or close.

6.2. Manual Mode (Power Failure)

In case of a power failure, you can operate the door manually:

1. To enter Manual Mode: Pull down the RED disengagement handle. This disconnects the motor from the door, allowing you to open or close it by hand.
2. To return to Automatic Mode: Once power is restored, pull down the GREEN engage handle. This reconnects the motor, and the door can be operated automatically again.

6.3. Programmable Digital Display

The digital display allows customization of various settings:

• Door Speed: Adjust the opening and closing speed of the door.
• Force Sensitivity: Fine-tune the obstacle detection sensitivity.
• Automatic Closing Time: Set a delay for the door to automatically close after opening.

Consult the detailed manual for step-by-step instructions on programming these settings using the 'SET' button and navigation buttons.

7. Maintenance

• Regular Inspection: Periodically check the door opener, mounting hardware, and door mechanism for any loose parts, wear, or damage.
• Cleaning: Keep the opener unit clean and free from dust and debris. Do not use harsh chemicals.
• Lubrication: Follow your door manufacturer's recommendations for lubricating door tracks and moving parts. Do not lubricate the opener's internal components.
• Battery Replacement: Replace the A27 12V batteries in your remote controls and wireless wall button as needed.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the PORIYA customer service department. Keep your purchase receipt as proof of purchase.