SPORTARC TF-02H/H-100/LCD-S866

Contents

SPORTARC KT Ebike Display User Manual

Models: TF-02H, H-100, LCD-S866

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SPORTARC KT Ebike Display, including models TF-02H, H-100, and LCD-S866. These colorful LCD instrument panels are designed to provide essential cycling data and are compatible with KT controllers. Please read this manual thoroughly before use to ensure proper function and safety.

2. Key Features

  • Clear Visibility: Color LCD screen provides a clear view even in direct sunlight.
  • Real-time Data: Displays real-time information such as speed, battery level, and mileage.
  • User-Friendly: Options for average speed, top speed, and real-time speed. Units adjustable between kilometers and miles.
  • Robust Design: Maintains normal function and operates efficiently in various weather conditions.
  • Diagnostic Capability: Displays common fault codes for easier troubleshooting and maintenance.
  • Waterproof Connector: Equipped with a 5-pin waterproof connector for reliable connection.
Comparison of TF-02H, LCD-S866, and H-100 Ebike Displays
Figure 1: Overview of TF-02H, LCD-S866, and H-100 Ebike Displays, designed for KT controllers.

3. Setup and Installation

Before installation, ensure your ebike controller is a KT controller and is compatible with communication protocol 2. Incorrect protocol or wiring can lead to malfunction.

3.1 Mounting the Display

  1. Choose a suitable location on your ebike handlebars for optimal visibility and access.
  2. Securely attach the display bracket to the handlebars. The clamp diameter for LCD-S866 and H-100 is 22.2mm.
  3. Mount the display onto the bracket, ensuring it is firmly installed and stable.
KT TF02H instrument firmly installed
Figure 2: Example of a firmly installed TF-02H display.

3.2 Connecting the Wiring

  • Locate the 5-pin waterproof connector on your ebike controller.
  • Connect the display's 5-pin waterproof connector to the controller's corresponding port. Ensure the connection is secure and fully seated to maintain its waterproof integrity.
  • Verify that the wiring is not pinched or strained.
TF-02H display with 5-core waterproof head and dimensions
Figure 3: TF-02H display showing the 5-core waterproof head and cable length (180mm/7inch).
H-100 display with 5-pin waterproof head and button
Figure 4: H-100 display highlighting the 5-pin waterproof head and control button, with a cable length of 260mm/10.23inch.
LCD-S866 display with 5-core waterproof head
Figure 5: LCD-S866 display showing the 5-core waterproof head and cable length (176mm/0.58inch).

4. Operating Instructions

4.1 Power On/Off

Press and hold the power button (usually marked with a power symbol) on the display to turn it on or off.

4.2 Displayed Information

The display provides various real-time data:

  • Speed: Current, average, and maximum speed.
  • Battery Level: Indication of remaining battery charge.
  • Mileage: Single trip distance (ODO) and total mileage (TTM).
  • Motor Power: Real-time motor power output (e.g., 138W on TF-02H).
  • Assistance Level: Current pedal assist level.
  • Ambient Temperature: Current temperature (e.g., 26°C on TF-02H).
  • Voltage: Current battery voltage (e.g., 35.5V on TF-02H).
TF-02H display showing various data points
Figure 6: TF-02H display interface showing battery level, ambient temperature, speed, single mileage, shift gears to single ride time, and motor power display.

4.3 Adjusting Units and Settings

Refer to your specific display model's detailed settings menu for adjusting units (kilometers/miles) and other parameters. This is typically accessed by holding down certain buttons or navigating through the menu.

5. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the display screen. Avoid abrasive cleaners or solvents that could damage the screen or casing.
  • Water Exposure: While the connector is waterproof, avoid submerging the display. Ensure the connector is always securely fastened.
  • Storage: When not in use for extended periods, store the ebike in a dry, temperate environment.

6. Troubleshooting

  • No Power: Check the connection to the KT controller. Ensure the controller is powered on and functioning correctly.
  • Incorrect Readings: Verify that the display is correctly configured for your ebike's wheel size and other parameters in the settings menu.
  • Fault Codes: The display is designed to show common fault codes. If a code appears, consult your KT controller manual or contact support with the specific code for diagnosis.
  • Display Unresponsive: Try turning the ebike off and on again. If the issue persists, check all connections.

7. Specifications

7.1 TF-02H Display

AttributeValue
SizeApprox. 97.5 x 63.5 mm
WeightApprox. 190g
Voltage36V, 48V
Cord Length180 mm
Connector5-pin Waterproof connector

7.2 LCD-S866 Display

AttributeValue
Product ModelS866
Product NameJianuo LCD Color Screen
SizeApprox. 81 x 48 mm
WeightApprox. 100g
Voltage24V, 36V, 48V
Cord Length176 mm
Waterproof RatingIP65
Operating Temperature-20°C to 60°C
ConnectorWaterproof connector (5 pins)
ColorBlack
LCD-S866 display dimensions and specifications
Figure 7: LCD-S866 display with detailed dimensions and a table of specifications.

7.3 H-100 Display

AttributeValue
Product ModelH-100
Product NameJN Instrument
SizeApprox. 94 x 63 mm
WeightApprox. 200g
Voltage24V-72V
Cord Length260 mm
Operating Temperature-20~60°C
ConnectorWaterproof Connector (5 pins)
ColorBlack
H-100 display dimensions and specifications
Figure 8: H-100 display with detailed dimensions and a table of specifications.

8. User Tips

  • Compatibility Check: Always double-check that your ebike's controller is a KT controller and uses the correct communication protocol (protocol 2) before purchasing or installing. This is crucial for proper function.
  • Readability: Users have noted the displays are generally large, nice, and easy-to-read, even in various lighting conditions.

9. Warranty and Support

For any issues, technical support, or warranty claims, please contact the seller or manufacturer directly. Provide your product model and a detailed description of the issue for efficient assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.