FGHGF WiFi LoRa 32 V4

Contents

ESP32 SX1262 WiFi LoRa 32 V4 Development Board Expansion Kit User Manual

Model: WiFi LoRa 32 V4

Introduction

The WiFi LoRa 32 V4 Expansion Kit is a comprehensive set designed for the WiFi LoRa 32 V4 development board. This kit includes a tempered glass panel, protective cases, a built-in battery, expansion carrier boards, GXHTV3 sensor modules, BME280 sensor modules, a buzzer, and other components. The WiFi LoRa 32 V4 is an upgraded version of the classic LoRa development board, featuring optimizations in transmit power, power management, and expandability. It is suitable for a wide range of IoT applications, including smart cities, agricultural monitoring, smart homes, industrial control, security systems, and wireless meter reading, offering developers an efficient and flexible development experience.

Package Contents

Please verify that all items listed below are present in your package:

  • 1 x Main Unit (WiFi LoRa 32 V4 Development Board)
  • 1 x Back Clip
  • 1 x Antenna
  • Protective Cases (with Tempered Glass Panel)
  • Built-in 2800mAh 18650 Li-Battery
  • Expansion Carrier Boards (if included in specific kit variant)
  • GXHTV3 Sensor Modules (if included in specific kit variant)
  • BME280 Sensor Modules (if included in specific kit variant)
  • Buzzer (if included in specific kit variant)

Note: The specific components of the expansion kit may vary. Refer to your purchase details for exact inclusions.

Product Overview

The WiFi LoRa 32 V4 is a versatile development board designed for IoT projects, combining Wi-Fi, Bluetooth Low Energy (BLE), and LoRa communication capabilities. It features an ESP32-S3R2 microcontroller and an SX1262 LoRa transceiver.

Key Features:

  • Microcontroller: ESP32-S3R2 & SX-1262, supporting Wi-Fi b/g/n, BLE, and LoRa communication.
  • Memory: 2MB PSRAM and 16MB external Flash, suitable for UI and complex systems.
  • LoRa Transmission: High-power version 28 dBm, Low-power version 22 dBm.
  • Display: Onboard OLED Display.
  • Power Management: Optimized lithium battery management, low power consumption (less than 20μA).
  • Connectivity: Added SH1.25-2Pin solar panel interface and SH1.25-8Pin GNSS interface.
  • Protection: PC casing protects the screen and integrates FPC 2.4G antenna.
  • Compatibility: Form factor and pin compatibility with WiFi LoRa 32 V3.

Component Identification:

Internal view of WiFi LoRa 32 V4 development board with battery and 'Rapid Extension' label.
Figure 1: Internal view of the WiFi LoRa 32 V4 Development Board, showing the main unit and battery compartment.
WiFi LoRa 32 V4 development board with onboard OLED display and USB-C port.
Figure 2: The WiFi LoRa 32 V4 development board, highlighting the onboard OLED display and USB-C port.
Diagram illustrating LoRa transmission power upgrade with greater signal penetration and longer transmission distance.
Figure 3: LoRa transmission power upgrade details, showing enhanced signal penetration and range.

Setup Instructions

  1. Unpacking: Carefully remove all components from the packaging. Inspect for any visible damage.
  2. Battery Installation/Charging: The device includes a built-in 2800mAh 18650 Li-Battery. Ensure it is charged before first use. Connect the device to a 5V USB power source using a compatible USB-C cable. The onboard charging indicator (if present) will show charging status.
  3. Antenna Connection: Attach the provided antenna to the SMA Female antenna socket on the main unit. Ensure it is securely fastened but do not overtighten.
    LoRa antenna for the development board.
    Figure 4: The included LoRa antenna.
  4. Case Assembly: If the main unit and tempered glass panel are separate, carefully assemble them into the protective PC casing. Ensure all connections are secure and the board is properly seated.
  5. Back Clip Attachment: Attach the back clip to the protective case if desired for mounting or portability.
    Back clip accessory for the development board case.
    Figure 5: The back clip accessory.
  6. Initial Power On: Press the power button (if available) or connect to a power source to turn on the device. The onboard OLED display should activate.
  7. Development Environment Setup: For programming and advanced use, set up your preferred ESP32 development environment (e.g., Arduino IDE, PlatformIO, ESP-IDF). Install necessary drivers and board definitions for the ESP32-S3R2.

Operating Instructions

The WiFi LoRa 32 V4 is a development board, and its operation is primarily defined by the firmware loaded onto it. The following are general guidelines:

  1. Firmware Upload: Connect the board to your computer via the USB-C port. Use your development environment to compile and upload your desired firmware. This firmware will dictate the board's functionality (e.g., Wi-Fi client, LoRa node, BLE beacon).
  2. Wi-Fi Communication: If your firmware enables Wi-Fi, the board can connect to local networks or act as an access point. Refer to your firmware's documentation for specific Wi-Fi configuration.
  3. Bluetooth Low Energy (BLE): The ESP32-S3R2 supports BLE. Your firmware can implement various BLE roles, such as a peripheral advertising data or a central device scanning for others.
  4. LoRa Communication: The SX1262 transceiver enables long-range, low-power LoRa communication. Configure LoRa parameters (frequency, spreading factor, bandwidth) within your firmware to communicate with other LoRa devices or gateways. The LoRa Freq range is 863-928MHz.
  5. GNSS Functionality: Utilize the SH1.25-8Pin GNSS interface with a compatible GNSS module (e.g., Quectel L76K) to acquire location data. Firmware will be required to interface with the GNSS module.
  6. Sensor Integration: The kit supports GXHTV3 and BME280 sensor modules. Connect these to the appropriate expansion ports and integrate their drivers into your firmware to read environmental data.
  7. OLED Display: The onboard OLED display can be programmed to show status information, sensor readings, or other relevant data.
  8. Low Power Mode: Leverage the optimized power management features and low power consumption (less than 20μA) by implementing deep sleep or light sleep modes in your firmware for battery-powered applications.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquids or abrasive cleaners.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, avoid fully discharging the 18650 Li-Battery frequently. If storing for extended periods, charge the battery to approximately 50-70%.
  • Firmware Updates: Regularly check for updated firmware or libraries from the community or manufacturer to ensure optimal performance and security.
  • Physical Protection: Keep the device in its protective casing to prevent damage to the tempered glass panel and internal components.

Troubleshooting

  • Device Not Powering On:
    • Ensure the battery is charged.
    • Verify the USB-C cable and power source are functional.
    • Check for any loose connections or physical damage.
  • Firmware Upload Failure:
    • Confirm correct board selection in your IDE.
    • Ensure proper drivers are installed for the USB-to-serial converter.
    • Check that the correct COM port is selected.
    • Try holding the BOOT button (if available) while uploading.
  • No Wi-Fi/LoRa/BLE Connectivity:
    • Verify the antenna is securely connected.
    • Check your firmware code for correct initialization and configuration of the respective radio module.
    • Ensure the target network/device is within range and properly configured.
  • OLED Display Not Working:
    • Check firmware code for display initialization and data output.
    • Ensure the display is properly connected to the board (if not integrated).
  • Sensor Readings Incorrect:
    • Verify sensor connections to the expansion ports.
    • Check firmware code for correct sensor library usage and data interpretation.

Specifications

FeatureDetail
ModelWiFi LoRa 32 V4
MicrocontrollerESP32-S3R2
LoRa TransceiverSX-1262
Communication MethodsWi-Fi b/g/n, BLE (Bluetooth-Compatible), LoRa
PSRAM2MB
External Flash16MB
LoRa Frequency863-928MHz
LoRa TX Power28±1dBm (High-power), 22 dBm (Low-power)
DisplayOnboard OLED Display
Battery2800mAh 18650 Li-Battery (Built-in)
GNSS Module (Optional)Quectel L76K (via SH1.25-8Pin interface)
Triaxial AccelerometerDA217 (if integrated)
Expansion SocketB2B Female
Antenna SocketSMA Female
Solar Panel InterfaceSH1.25-2Pin
Low Power ConsumptionLess than 20μA
Front Cover MaterialTempered Glass
Side Cover MaterialAluminum Alloy
Rear Cover MaterialPolycarbonate (PC)
ColorBlack & Transparent
Brand NameFGHGF

User Tips

Based on general usage patterns for development boards:

  • Start with Examples: If new to ESP32 or LoRa, begin with official examples or community-provided code to understand basic functionality before developing complex applications.
  • Power Management: For battery-powered projects, thoroughly test and optimize your code for low-power modes to maximize battery life, especially given the device's low power consumption capabilities.
  • Antenna Placement: For optimal LoRa range, ensure the antenna is positioned vertically and has a clear line of sight. Avoid placing it near large metal objects.
  • Community Support: Engage with online communities and forums dedicated to ESP32 and LoRa development for troubleshooting, project ideas, and sharing knowledge.

Warranty and Support

For technical support, documentation, and community resources, please refer to the manufacturer's official website or relevant online development communities for ESP32 and LoRa products. Specific warranty details may vary by region and retailer; please consult your purchase documentation for information regarding warranty coverage and claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.