FGHGF ESP32-C3-XIAO

Contents

ESP32-C3-XIAO Development Board User Manual

Model: ESP32-C3-XIAO

1. Introduction

The ESP32-C3-XIAO development board is a compact IoT mini development board featuring an onboard ESP32-C3FH4 WiFi/Bluetooth dual-mode chip. Designed for high performance and low power consumption, it is ideal for various IoT applications and wireless wearable devices.

The ESP32-C3 is a 32-bit RISC-V CPU, incorporating an FPU (floating point unit) for 32-bit single-precision operations, providing robust computing capabilities. It offers excellent RF performance, supports IEEE802.11b/g/n WiFi and Bluetooth 5 (LE) protocols, and includes an antenna to enhance wireless signal strength.

2. Product Overview

The ESP32-C3-XIAO board integrates essential features for IoT development in a miniature form factor. Key features include:

  • On-board WS2812 RGB LED for visual feedback and control.
  • Integrated WiFi and Bluetooth module for wireless connectivity.
  • Rich interfaces for versatile expansion and peripheral connections.
  • Powered by the ESP32-C3FH4 dual-mode chip.
ESP32-C3-XIAO Development Board highlighting key features
Figure 2.1: ESP32-C3-XIAO Development Board with highlighted features: On-board WS2812, WiFi/Bluetooth module, rich interfaces, and ESP32-C3FH4 dual-mode chip.
Close-up view of the ESP32-C3-XIAO development board
Figure 2.2: Close-up view of the ESP32-C3-XIAO development board, showing the USB-C port, ESP32-C3FH4 chip, buttons, and pin headers.

3. Specifications

FeatureDescription
ModelESP32-C3-XIAO Development Board
ChipESP32-C3FH4 (32-bit RISC-V CPU with FPU)
ConnectivityIEEE802.11b/g/n WiFi, Bluetooth 5 (LE)
Onboard ComponentsWS2812 RGB LED
InterfacesRich interfaces for expansion
Dimensions (Approx.)Length: 3 cm, Width: 2 cm, Height: 2 cm
Weight (Approx.)0.02 kg
ColorBlue
MaterialPCB
OriginMainland China

4. Package Contents

Your package should contain the following items:

  • 2 x ESP32-C3-XIAO Development Board
  • 4 x 10P Single Row Pins

5. Setup Instructions

To get started with your ESP32-C3-XIAO Development Board, follow these steps for initial setup and mobile control:

  1. Install ESP RainMaker App: Open your mobile device's application market (e.g., Google Play Store, Apple App Store), search for "ESP RainMaker," and install the application.
  2. Screenshot of ESP RainMaker app with Add Device option
    Figure 5.1: ESP RainMaker app interface showing the 'Add Device' option.
  3. Add a Device: In the ESP RainMaker app, click the "Add Device" button.
  4. Reset Wi-Fi Settings (if needed): Press and hold the BOOT button on the development board for more than 3 seconds to reset its Wi-Fi settings. If the device's serial port is connected to a computer, it may display a QR code. You can scan this QR code for network distribution. Alternatively, if you don't have a QR code, select the BLE (Bluetooth Low Energy) option within the app for setup.
  5. Screenshot of ESP RainMaker app showing QR code scanning and BLE option
    Figure 5.2: ESP RainMaker app showing options for device pairing, including QR code scanning and BLE.
  6. Control Module Access: Once the device is successfully added, click to enter the specific control module (e.g., relay control, WS2812 control) within the app.
  7. Screenshot of WS2812 control interface in ESP RainMaker app
    Figure 5.3: WS2812 control interface within the ESP RainMaker app, featuring power and color adjustment sliders.

The SDKESP-IDF code is provided for programming. After burning the program to the board, it can be directly remotely controlled via your mobile phone.

6. Operating Instructions

After successfully setting up your ESP32-C3-XIAO Development Board with the ESP RainMaker app, you can control its functionalities:

  • WS2812 Control: Navigate to the WS2812 control module in the app. Here, you can adjust the power state and color of the onboard RGB LED using the provided sliders.
  • Relay Control: If your project involves a relay, access the relay control module to switch the relay on or off.
  • WiFi Network Configuration: The onboard RGB lamp beads can indicate WiFi network configuration status. Refer to the app or contact customer service for specific light patterns and their meanings.
  • Factory Reset: To perform a factory reset, press and hold the BOOT button for more than 10 seconds.

7. User Tips

This section will be updated with user-contributed tips and best practices based on common usage scenarios and community feedback.

8. Troubleshooting

If you encounter issues with your ESP32-C3-XIAO Development Board, consider the following general troubleshooting steps:

  • Connectivity Issues: Ensure the board is powered correctly. Verify your Wi-Fi network is active and the board is within range. Try resetting the Wi-Fi settings by holding the BOOT button for 3 seconds and re-pairing with the app.
  • App Not Detecting Device: Confirm Bluetooth is enabled on your mobile device. Ensure the board is in pairing mode.
  • Unexpected Behavior: A factory reset (holding BOOT button for 10+ seconds) can resolve many software-related issues by restoring default settings.
  • Programming Errors: Double-check your code and development environment setup (e.g., ESP-IDF). Consult relevant documentation and community forums for specific programming issues.

For persistent problems, please refer to the official documentation or seek support from the product community.

9. Warranty and Support

This product is covered by the standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.

For technical support, documentation, or further assistance, please refer to the seller's contact information or the official product support channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.