SEMBO BLOCK Metal Cardbot

Contents

SEMBO BLOCK Metal Cardbot Assembly Instructions

Model: Metal Cardbot Series (NO.900042)

Brand: SEMBO BLOCK

Introduction

This manual provides detailed instructions for assembling and maintaining your SEMBO BLOCK Metal Cardbot figure. These micro building blocks offer a high level of detail and are designed to enhance fine motor skills, spatial awareness, and storytelling abilities. Each set contains high-quality, durable, and non-toxic ABS plastic components, ensuring a safe and engaging building experience.

WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

WARNING: DO NOT SWALLOW small parts. Choking hazard. Not suitable for children under 3 years.

Setup and Assembly

Your Metal Cardbot figure comes as a set of micro building blocks. Follow the steps below to assemble your figure. An instruction manual is included in each package to guide you through the process.

Video: Unboxing and step-by-step assembly demonstration of a Metal Cardbot figure.

Package Contents:

Each Metal Cardbot set typically includes:

  • Main Body components (building blocks)
  • Weapon accessories (building blocks)
  • Character Card
  • Instruction Manual
Diagram showing the contents of a Metal Cardbot set: main body, weapon, character card, and instruction manual.

Image: Contents of a typical Metal Cardbot set.

Assembly Steps:

  1. Carefully open the package and lay out all the building block components.
  2. Refer to the included instruction manual for specific assembly steps for your figure.
  3. Begin by assembling the head, then proceed to the torso, arms, and legs, connecting them as indicated in the manual.
  4. Attach any weapon accessories or additional armor pieces to complete the figure.
  5. Ensure all connections are secure to prevent parts from detaching during play.
Close-up of an assembled blue Metal Cardbot figure, showing intricate details.

Image: An assembled 'random 1pcs' blue Metal Cardbot figure.

Operating Your Metal Cardbot

Once assembled, your Metal Cardbot figure is ready for play and display. The figures are designed with articulation points for dynamic posing.

Articulation Features:

  • Shoulder Joints: Multi-angle movement allows for various arm poses.
  • Wrist Rotation: Wrists can rotate for expressive hand and weapon positioning.
  • Waist Rotation: A 360-degree rotating waist provides flexibility for dynamic stances.
  • Foot Grip: Designed for stability in different poses.
Diagram illustrating the articulation points of a Metal Cardbot figure, including shoulder, wrist, waist, and foot movement.

Image: Articulation points of the Metal Cardbot figure.

Posing and Display:

Experiment with different poses to recreate battle scenes or display your figure in a heroic stance. The figures are compatible with other small building blocks, allowing for creative customization.

Care and Maintenance

To ensure the longevity of your Metal Cardbot figure, follow these simple care instructions:

  • Cleaning: Wipe the figure with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the figure in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Handling: Handle with care to avoid accidental breakage of small parts.
  • Missing Parts: If any parts are found missing after receiving the package, please contact the seller immediately for assistance.

Troubleshooting

Loose Connections:

If parts feel loose after assembly, gently press them together until you hear a click or feel a secure connection. The blocks are designed to fit snugly.

Difficulty Assembling:

Double-check the instruction manual for the correct orientation and placement of each piece. Ensure you are using the correct parts for each step. If a piece is particularly stiff, apply gentle, even pressure.

Specifications

AttributeDetail
Product NameMetal Cardbot Series
Item No.900042
MaterialHigh-quality ABS Plastic
Block SizeSmall building block (Compatible with Lego)
Product Size (approx.)50 x 25 x 60 mm (Regular Edition) / approx. 7 cm height (Hidden Edition)
Packaging Size72 x 45 x 105 mm
Is ElectricNo Battery
GenderUnisex
Recommended Age14+ years, 18+ years
CertificationCE
OriginMainland China
Table showing product information including product name, size, item number, material, and packaging dimensions.

Image: Product Information Table.

Image comparing the size of a Hidden Edition Metal Cardbot (approx. 7cm) and a Regular Edition Metal Cardbot (approx. 6cm).

Image: Size comparison of Metal Cardbot figures.

User Tips

  • For a more satisfying build, sort all pieces by color and shape before starting assembly.
  • Take your time with each step to ensure correct placement and a sturdy final model.
  • The figures are highly poseable; experiment with different stances to find your favorite display configuration.

Warranty and Support

For any issues, missing parts, or support inquiries, please contact the seller directly. Ensure you retain your purchase records for verification.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.