HawkSpeed C8801PRO

Contents

JJRC C8801PRO 1/18 Scale RC Car Instruction Manual

Model: C8801PRO | Brand: HawkSpeed

JJRC C8801PRO 1/18 Scale RC Car in black, a full proportional control 4WD off-road vehicle.
Figure 1: JJRC C8801PRO 1/18 Scale RC Car.

Introduction

This manual provides detailed instructions for the operation and maintenance of your JJRC C8801PRO 1/18 Scale RC Car. This full proportional control 4WD off-road vehicle is designed for enthusiasts aged 14 and above, offering an exciting and realistic driving experience across various terrains.

Safety Warnings

  • ⚠ Not suitable for children under 36 months due to small parts.
  • ⚠ Always read the manual before use to ensure proper operation and prevent damage or injury.
  • ⚠ This product is electric and contains a Lithium Battery. Handle with care and follow all battery safety guidelines.
  • ⚠ Ensure the vehicle is operated in a safe environment, away from people, pets, and obstacles.

Package Contents

Please check the box for the following items:

  • 1 x JJRC C8801PRO RC Car
  • 1 x Remote Controller
  • 1 x 7.4V Lithium Battery (for car)
  • 1 x Charger
  • 1 x USB Cable
  • 1 x Instruction Manual
Contents of the PRO version package including RC car, remote control, battery, USB charging cable, instruction book, carbon brush motor, ESC, metal drive shaft, servo, and metal hydraulic shock absorbers.
Figure 2: PRO Version Package Contents. Note: Black metal wheel hubs and silver metal wheel hubs are shipped randomly.

Specifications

FeatureDetail
Model NumberJJRC C8801PRO
Brand NameHawkSpeed
Scale1:18
Dimensions (Car)26 x 13 x 12 cm (Length x Width x Height)
Weight (PRO version)679g
Weight (Standard version)586g
Remote Distance100m
Control Channels3.5 Channels
Power SourceLithium Battery (for car)
Car Battery7.4V 600mAh
Remote Control Battery4 x AA (not included)
Play TimeApprox. 40 minutes
Charging TimeApprox. 2 hours
Speed12 KM/H
Driving System4-Wheel Drive (4WD)
MaterialMetal, Plastic (ABS Shell)
State of AssemblyReady-to-Go
Recommended Age14+ years
CertificationCE
Product parameter table showing dimensions, usage time, charging time, battery specs, remote control battery, remote distance, speed, and driving system.
Figure 3: Detailed Product Parameters.
Diagram showing the dimensions of the RC car: 260mm length, 120mm height, 150mm wheelbase, 40mm tire width, 26mm ground clearance, 56.5 degree approach angle, 55 degree breakover angle, and 48.5 degree departure angle.
Figure 4: RC Car Dimensions and Angles.
Image showing the PRO version of the RC car on a scale, indicating a weight of 679g.
Figure 5: PRO Version Weight (679g).
Image showing the Standard version of the RC car on a scale, indicating a weight of 586g.
Figure 6: Standard Version Weight (586g).
Diagram of the Standard version chassis showing components like spring shock absorbers, motor, ESC, nylon drive shaft, and servo.
Figure 7: Standard Version Chassis and Accessories.
Diagram of the PRO version chassis showing components like widened integrated bridge, tie rods, diamond bridge housing, metal drive shaft, metal hydraulic shock absorbers, and servo.
Figure 8: PRO Version Chassis and Accessories.
Image showing the ABS shell of the RC car, highlighting its detailed imitation of a Wrangler with features like spare tire, towing hook, and rearview mirror.
Figure 9: Excellent Construction ABS Shell.

Setup Guide

1. Remote Control Battery Installation

  1. Locate the battery compartment on the back of the remote controller.
  2. Open the battery cover.
  3. Insert 4 AA batteries (not included), ensuring correct polarity (+/-).
  4. Close the battery cover securely.

2. Car Battery Installation & Charging

  1. Ensure the RC car's power switch is OFF.
  2. Locate the battery compartment on the underside or within the chassis of the RC car.
  3. Carefully connect the provided 7.4V Lithium Battery to the car's battery connector.
  4. Secure the battery in its compartment. The battery is designed to be installed in a low position for better stability.
  5. To charge the car battery, connect it to the charger using the USB cable. Plug the charger into a suitable power source. The charging time is approximately 2 hours.
Image showing the car battery installed in a low position within the chassis, secured with a strap, emphasizing stable center of gravity.
Figure 10: Car battery installed in a low position for stability.

3. Power On and Pairing

  1. Turn on the remote controller first. The power indicator light should illuminate.
  2. Turn on the power switch on the RC car.
  3. The remote controller and car should automatically pair. If not, refer to the troubleshooting section.

Operating Instructions

Remote Control Functions

Diagram of the PRO version remote control with labels for: Low speed, neutral, high speed switch, Steering wheel, Throttle reverse switch, Steering reverse switch, Throttle trim knob, Steering trim knob, Power indicator, Power switch, Steering ratio, Lights control, and Throttle trigger.
Figure 11: PRO Version Remote Control Layout.
Diagram of the Standard version remote control with labels for: Throttle limit 1-2-3, Steering wheel, Throttle reverse switch, Steering reverse switch, Throttle trim knob, Steering trim knob, Power indicator, Power switch, Steering ratio, Lights control, and Throttle trigger.
Figure 12: Standard Version Remote Control Layout.
  • Throttle Trigger: Pull to accelerate forward, push to brake/reverse.
  • Steering Wheel: Turn left or right to steer the vehicle.
  • Speed Switch (PRO version): Select between Low, Neutral, and High speed modes.
  • Throttle Limit (Standard version): Adjust the maximum throttle output (1-2-3 settings).
  • Throttle Trim Knob: Adjusts the neutral position of the throttle. If the car moves forward or backward when the trigger is at neutral, use this knob to correct it.
  • Steering Trim Knob: Adjusts the neutral position of the steering. If the car pulls to one side when the steering wheel is centered, use this knob to correct it.
  • Steering Reverse Switch: Reverses the steering direction.
  • Throttle Reverse Switch: Reverses the throttle direction.
  • Lights Control: Activates/deactivates the vehicle's lights.
  • Power Switch: Turns the remote controller on/off.
  • Power Indicator: Shows the remote controller's power status.

Driving the RC Car

  • Starting: After pairing, gently pull the throttle trigger to move forward.
  • Steering: Use the steering wheel to navigate.
  • Speed Adjustment: Utilize the speed switch (PRO version) or throttle limit (Standard version) to match the driving conditions. The dual-speed gearbox allows for enhanced climbing and off-road performance.
  • Off-Road Capability: The upgraded chassis with high ground clearance, enlarged tires, and adjustable hydraulic shock absorbers enable the car to handle various terrains such as off-road trails, sand, rock, and regular roads.
Front view of the RC car on a dirt path, highlighting the upgraded chassis with high ground clearance. An inset shows a close-up of the differential.
Figure 13: Upgraded Chassis with High Ground Clearance.
Side view of the RC car on a rocky terrain, showcasing the upgraded adjustable hydraulic shock absorbers. An inset diagram explains how to rotate a ring to loosen for softer shock absorption or tighten for firmer stability.
Figure 14: Adjustable Hydraulic Shock Absorbers for varied off-roading stances.
Collage showing the RC car operating on various terrains: sand, off-road, rock, and road, demonstrating its versatility.
Figure 15: Multiple Terrains Capability (Outdoor/Indoor).
Images showing the RC car's headlights with bright, controllable linkage lights and rear lights with turn signals and backup lights.
Figure 16: Headlight and Rear Light Features.
Internal diagram of the RC car showing the dual-speed gearbox with mechanical shifting, designed for enhanced climbing and off-road performance.
Figure 17: Dual-Speed Gearbox with Mechanical Shifting.
Image illustrating the RC car's climbing ability on a 45-degree slope, highlighting its low-speed climbing and 3-speed adjustable features, along with approach, breakover, and departure angles.
Figure 18: Low-Speed Climbing and Adjustable Angles.
Live-action display of the RC car climbing over rocks, demonstrating its off-road capabilities.
Figure 19: Live-Action Climbing Display.

Maintenance

  • Cleaning: After each use, especially in dusty or wet conditions, clean the car with a soft brush or cloth. Avoid using water directly on electronic components.
  • Battery Care: Always disconnect the battery from the car when not in use. Store batteries in a cool, dry place. Do not overcharge or over-discharge the battery.
  • Lubrication: Periodically check moving parts like gears and bearings for wear and lubricate as needed with RC-specific lubricants.
  • Inspection: Regularly inspect the chassis, suspension, and tires for any damage or loose parts. Tighten screws as necessary.
  • Storage: When storing for extended periods, remove batteries from both the car and the remote control.

Troubleshooting

ProblemPossible CauseSolution
Car does not respond to remote control.Low batteries in car or remote; Not paired; Power switch off.Replace/charge batteries; Ensure car and remote are both on; Re-pair by turning both off then remote on first, then car.
Car moves erratically or pulls to one side.Trim settings incorrect; Steering mechanism damaged.Adjust Steering Trim Knob or Throttle Trim Knob; Inspect steering components for damage.
Reduced power or short play time.Car battery low or not fully charged; Battery degradation.Fully charge the car battery; Consider replacing the battery if it's old or damaged.
Car makes unusual noises.Debris in gears; Worn gears or motor.Clean out any debris; Inspect gears and motor for wear and replace if necessary.

User Tips

  • For optimal off-road performance, experiment with the adjustable hydraulic shock absorbers to find the best setting for different terrains.
  • Utilize the dual-speed gearbox to switch between high speed for open areas and low speed for challenging climbs and technical off-roading.
  • The intelligent linkage lights add to the realism; remember to use them for better visibility in low-light conditions.

Warranty and Support

For any issues, questions, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.