1. Introduction
The TTNergy TTN-MAX11KB is a multi-function hybrid solar inverter/charger designed to provide uninterruptible power support. It efficiently converts DC power from a PV array into usable AC power and works with batteries to store excess energy. This inverter is particularly useful in regions with unstable or absent grid electricity.
The grid-interactive inverter controls and monitors the connection of electricity from power plants, managing the dispatch of power based on demand and ensuring optimal performance.
2. Safety Information
- Read all instructions and cautionary markings on the unit and in this manual before installation and operation.
- Installation must be performed by qualified personnel.
- Do not disassemble the unit. There are no user-serviceable parts inside.
- Ensure proper grounding to prevent electric shock.
- Keep the inverter away from flammable materials and ensure adequate ventilation.
- Verify that the battery voltage and PV array voltage are compatible with the inverter's specifications.
3. Product Overview
3.1 Key Features
- Higher yields, safe, reliable, smart, and user-friendly design.
- Comprehensive LCD display for user-configurable settings.
- Built-in Wi-Fi for mobile monitoring (Android/iOS apps available).
- Supports USB On-the-Go function.
- Lithium battery BMS support (for Pylontech, Weco, Soltaro).
- Replaceable fan design for ease of maintenance.
- Batteryless operation (single unit mode only).
- Configurable AC/PV output usage timer and prioritization.
- Selectable high power charging current and input voltage range.
- Compatible with utility mains or generator input.
- Built-in anti-dust kit.
- Optional DC output for DC fan, LED bulb, router, etc.
- Parallel operation up to 6 units with built-in parallel kit.
- High PV input design, 500V (Voc) max input.
3.2 Components and Connections

Figure 3.2.1: Front and Rear Panel Diagram of the TTNergy Hybrid Solar Inverter.

Figure 3.2.2: Detailed view of the inverter's ports and connections.
- Remote LCD Port: For connecting an optional remote LCD module.
- Dry Contact (Genset Starter): For generator auto-start functionality.
- BMS Port: For Lithium battery BMS communication (CAN, RS-485 or RS-232).
- RS232 Port: For communication with a computer or monitoring device.
- Battery Input: Connects to the battery bank.
- AC Output (Load): Connects to household loads.
- AC Input: Connects to the utility grid or generator.
- PV Input: Connects to the solar panel array.
- Parallel Communication Port: For connecting multiple inverters in parallel.
- USB Port: For USB On-the-Go function and communication.
- 12V DC Output Connectors (Option): For connecting low-power DC devices like fans or routers.
- Power Switch for DC Output (Option): Controls the optional 12V DC output.
4. Specifications
4.1 General Specifications (TTN-MAX11KB)
| Feature | Specification |
|---|---|
| Model Number | TTN-MAX11KB |
| Rated Power | 11000W |
| Surge Power | 22000VA |
| Battery Voltage | 48VDC |
| Input Voltage (PV) | 500VDC (Max PV Input Voltage) |
| Input Voltage (AC) | 90-280VAC (Inverter Mode), 170-280VAC (UPS Mode) |
| Output Voltage (AC) | 220V/230V/240V ±5% |
| Output Frequency | 50 Hz/60 Hz Auto sensing |
| Waveform | Pure Sine Wave |
| Max PV Charge Current | 150A |
| Max AC Charge Current | 150A |
| Max Charge Current | 150A |
| Inverter Efficiency (Peak) | 98% |
| MPPT Range Operating Voltage | 90 ~ 450 VDC |
| Transfer Time (AC to DC) | 10ms (Computer Equipment), 20ms (Household Equipment) |
| Parallel Function | Optional, up to 6 units |
| Monitor Function | Optional, WiFi monitor |
| Communication Interface | USB/RS232/RS485/WiFi/Dry-contact |
| Dimensions (DxWxH) | 147.4 × 432.5 × 553.6 mm |
| Net Weight | 18.4 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 60°C |
| Humidity | 20%~95% Relative Humidity (Non-condensing) |
| Altitude | <1000m |
| Noise | ≤50dB |
| Certificate | CE |
| Warranty | 2 Years |
4.2 Other Models Comparison
| Feature | TTN-Max 11000 | TTN-Max 8000 | TTN-Max 7200 | TTN-Max 6500 |
|---|---|---|---|---|
| Capacity | 11000VA/11000W | 8000VA/8000W | 7200VA/7200W | 6500VA/6500W |
| Parallel | Yes, up to 6 units | |||
| INPUT | ||||
| Selectable Voltage Range | 230 VAC | 120 VAC | ||
| Frequency Range | 170-280 VAC (PC); 90-280 VAC (Home Appliances) | 90-140 VAC (PC); 80-140 VAC (Home Appliances) | ||
| OUTPUT | ||||
| AC Voltage Regulation (Batt. Mode) | 230 VAC ± 5% | 120 VAC ± 5% | ||
| Surge Power | 22000VA | 15000VA | 15000VA | 13000VA |
| Efficiency (Peak) | 90%~93% | |||
| Transfer Time | 15ms (PC), 20ms (Home Appliances) | |||
| Waveform | Pure Sine Wave | |||
| No Load Power Consumption | <70W | |||
| BATTERY | ||||
| Battery Voltage | 48 VDC | |||
| Floating Charge Voltage | 54 VDC | |||
| Overcharge Protection | 66 VDC | |||
| SOLAR CHARGER & AC CHARGER | ||||
| Solar Charger Type | MPPT | |||
| Max. PV Array Open Circuit Voltage | 500VDC | 250VDC | ||
| MPP Range @ Operating Voltage | 90~450VDC | 90~230VDC | ||
| Max. PV Array Power | 11000W (5500W×2) | 8000W (4000W x2) | ||
| Max. Solar Charge Current | 150 A | 80 A | 120A | |
| Max. AC Charge Current | 150 A | 80 A | 120A | |
| Max. Charge Current | 150 A | 120 A | 80 A | 120A |
| PHYSICAL | ||||
| Dimension, DxWxH (mm) | 147.4 × 432.5 × 553.6 | |||
| Net Weight (kgs) | 18.4 | |||
| Communication Interface | USB/RS232/RS485/WiFi/Dry-contact | |||
| ENVIRONMENT | ||||
| Humidity | 5% to 95% Relative Humidity (Non-condensing) | |||
| Operating Temperature | -10°C to 50°C | -10°C to 40°C | ||
| Storage Temperature | -15°C to 60°C | |||
5. Installation and Setup
5.1 Physical Installation
The inverter should be mounted in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure there is sufficient clearance around the unit for proper airflow. The unit's dimensions are 147.4 × 432.5 × 553.6 mm and it weighs 18.4 kg, so ensure the mounting surface can support its weight.

Figure 5.1.1: Inverter dimensions and compatible battery types (Flooded, Gel, AGM, Lithium, User Custom).
5.2 Electrical Connections
All electrical connections (PV, Battery, AC Input, AC Output) must be made according to local electrical codes and safety standards. Refer to the connection points described in Section 3.2. Ensure all connections are secure and properly insulated.
- PV Connection: Connect your solar panel array to the PV input terminals. Ensure the PV array open circuit voltage and power are within the inverter's specified limits (Max 500VDC, Max 11000W for TTN-MAX11KB).
- Battery Connection: Connect the battery bank to the Battery Input terminals. Observe correct polarity. The inverter supports 48VDC battery systems.
- AC Input Connection: Connect the utility grid or a compatible generator to the AC Input terminals.
- AC Output Connection: Connect your household loads to the AC Output terminals.
- Communication Connections: Connect optional remote LCD, BMS, RS232, or USB devices as needed.
6. Operation
6.1 LCD Display and Indicators

Figure 6.1.1: Inverter LCD display, indicators, and function buttons.
The inverter features a comprehensive LCD display (1) and various indicators to show its status and operational parameters.
- LED Display (1): Shows real-time data such as AC input Voltage, AC input frequency, PV Voltage, PV Current, Output Voltage, Output Frequency, Battery Voltage, Load Current, etc.
- Status Indicator (2): Indicates the general operational status of the inverter.
- Charging Indicator (3): Shows the battery charging status.
- Fault Indicator (4): Illuminates to indicate a fault condition.
- Function Buttons (5): Used to navigate menus and configure settings on the LCD.
- Power On/Off Switch (6): Controls the main power to the inverter.
6.2 Indicator Messages
| LED Indicator | Color | Solid/Flashing | Messages |
|---|---|---|---|
| Setting LED 1 | Green | Solid On | Output powered by utility |
| Setting LED 2 | Green | Solid On | Output powered by PV |
| Setting LED 3 | Green | Solid On | Output powered by battery |
| Status indicators (AC/INV) | Green | Solid On | Output is available in line mode |
| Flashing | Output is powered by battery in battery mode | ||
| Status indicators (CHG) | Green | Solid On | Battery is fully charged |
| Flashing | Battery is charging. |
7. Parallel Connection
The TTN-MAX11KB inverter supports parallel operation of up to 6 units to increase overall power capacity. Proper power and communication connections are crucial for stable parallel operation.

Figure 7.1.1: Various parallel connection wiring diagrams for 2, 3, 4, 5, and 6 inverters, including power and communication connections.
Refer to the detailed diagrams above for specific power and communication wiring configurations when connecting multiple inverters in parallel. Ensure all communication cables are correctly connected between units.
8. Maintenance
- Regularly inspect the inverter for any signs of damage or wear.
- Keep the inverter's ventilation openings clear of dust and debris to ensure proper cooling. The replaceable fan design facilitates maintenance.
- Check all electrical connections periodically to ensure they are tight and free from corrosion.
- Clean the exterior of the inverter with a dry cloth. Do not use liquid cleaners.
- For any internal maintenance, contact qualified service personnel.
9. Troubleshooting
If the inverter is not functioning as expected, consider the following general troubleshooting steps:
- No Power: Check the main power switch, battery connections, and AC input.
- Fault Indicator On: Refer to the LCD display for specific error codes or messages and consult the full manual for detailed fault descriptions and solutions.
- No Output: Verify that the load is connected correctly and not exceeding the inverter's capacity. Check battery charge level and PV input.
- Overload Warning: Reduce the connected load.
- Communication Issues: Ensure all communication cables are securely connected and that monitoring software/apps are correctly configured.
For persistent issues, contact technical support.
10. User Tips
- Battery Capacity Matching: Correctly matching the battery capacity to your system's load requirements and application scenarios is crucial. An improperly sized battery bank can lead to insufficient power or wasted generation. Always refer to the manual's recommendations or consult with a solar energy professional.
- Monitoring: Utilize the built-in Wi-Fi and mobile monitoring apps to keep track of your inverter's performance and system status remotely. This helps in proactive maintenance and optimization.
- Parallel Expansion: If your power needs grow, remember that this inverter supports parallel operation for up to 6 units, offering a scalable solution for increased capacity.
11. Warranty and Support
11.1 Warranty
The TTNergy TTN-MAX11KB Hybrid Solar Inverter comes with a 2-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.
11.2 Technical Support
For technical assistance, troubleshooting, or warranty inquiries, please contact your vendor or the manufacturer directly. You may also reach out via WhatsApp: +86 19897109233 for faster response and support.