1. Product Overview
The CONENTOOL 16 Lines Laser Level (Model LL03-ZC) is a professional-grade tool designed for precise leveling tasks. It features 16 green laser lines, offering 4x360° coverage for both horizontal and vertical applications. Equipped with a dual battery system and intelligent security features, it ensures accuracy and reliability for various indoor and outdoor projects.
2. Package Contents
Please check the contents of your package against the list below, depending on the version purchased:
2.1. 2400mAh without Tripod Package:
- 1 x Laser Level Main Unit
- 1 x Instruction Manual
- 1 x Cloth Bag
- 2 x 2400mAh Batteries
- 1 x Wall Magnet Bracket
- 1 x Plastic Triangular Trimmer Base
- 1 x Plastic Lifting Platform
- 1 x Remote Control Device
- 1 x Iron Sheet + Small Clip Buckle
- 1 x Charger (European Standard)
2.2. 2400mAh with Tripod Package:
- 1 x Laser Level Main Unit
- 1 x Instruction Manual
- 1 x Plastic Box
- 2 x 2400mAh Batteries
- 1 x Wall Magnet Bracket
- 1 x Plastic Triangular Trimmer Base
- 1 x Plastic Lifting Platform
- 1 x Remote Control Device
- 1 x Iron Sheet + Small Clip Buckle
- 1 x Charger (European Standard)
- 1 x Tripod (1m)
- 1 x Slash Header
- 1 x Conversion Screw
2.3. 3600mAh with Tripod Package:
- 1 x Laser Level Main Unit
- 1 x Instruction Manual
- 1 x Plastic Box
- 2 x 3600mAh Batteries
- 1 x Wall Magnet Bracket
- 1 x Semi-aluminum Triangular Fine-tuning Base
- 1 x All-aluminum Lifting Platform
- 1 x Remote Control Device
- 1 x Iron Sheet + Small Clip Buckle
- 1 x Charger (European Standard)
- 1 x Tripod (1m)
- 1 x Slash Header
- 1 x Conversion Screw
- 1 x Goggles
- 1 x Laser Board
3. Setup
3.1. Battery Installation
- Ensure the laser level is turned off.
- Locate the battery compartment on the side of the unit.
- Insert the provided 2400mAh or 3600mAh batteries, ensuring correct polarity.
- Close the battery compartment securely.
- Connect the charger to the unit and a power outlet (100~240V) to charge the batteries before first use.
3.2. Mounting and Placement
The CONENTOOL laser level offers multiple placement options for versatility:
- Direct Placement: Place the unit on a stable, flat surface.
- Tripod Mounting: The unit is threaded compatible with most tripods. Attach the laser level to the 1m tripod (if included) using the conversion screw if necessary. Adjust the tripod legs and vertical height adjustment handle for desired elevation.
- Wall Magnetic Bracket: Use the wall magnetic bracket to attach the laser level to metallic surfaces for precise height adjustment.
- Lifting Base: Utilize the plastic or all-aluminum lifting platform for convenient and fine height adjustments on flat surfaces.
- 360° Rotating Base: The mini tripod or semi-aluminum fine-tuning base allows for precise 360° rotation and adjustment.
4. Operating Instructions
4.1. Powering On and Self-Leveling
- Standard Start (Self-Leveling Mode): Slide the power switch to the 'ON' position. The device will automatically self-level within ±3°. If the tilt exceeds 3°, an alarm will sound, and the laser lines will flash to indicate it's out of range.
- Manual Mode (without alarm): To operate in manual mode (e.g., for angled lines), press and hold the 'H' or 'V' button to start the device without the self-leveling alarm. The laser lines will remain active even if the device is tilted beyond 3°.
4.2. Laser Line Selection and Modes
The laser level provides 16 lines (4 horizontal, 12 vertical) for comprehensive coverage. You can select specific lines or modes:
- Horizontal Lines (H): Press the 'H' button to cycle through horizontal laser lines.
- Vertical Lines (V): Press the 'V' button to cycle through vertical laser lines.
- Pulse Mode: Activate pulse mode for use with a laser receiver (not included) in bright conditions or over longer distances.
- Flash Mode: Use flash mode for specific applications as needed.
4.3. Brightness Adjustment
The laser level features 5-stage adjustable brightness for optimal visibility in different lighting conditions. Long press the 'H' button to increase brightness and long press the 'V' button to decrease brightness. This allows for up to 13 hours of operating time depending on the brightness setting and battery capacity.
4.4. 360° Rotatable Windows
The laser line windows can be rotated 360° to prevent broken laser lines and ensure continuous projection around obstacles. This feature enhances flexibility and accuracy in complex environments.
4.5. Remote Control Operation
Use the included remote control device to conveniently switch laser lines and modes from a distance, improving efficiency and ease of use.
5. Maintenance
- Cleaning: Regularly clean the laser windows and the device body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the laser level and its accessories in the provided cloth bag or plastic box in a dry, cool place, away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries if the device will not be used for an extended period. Recharge batteries periodically to maintain their lifespan.
- Calibration: While the device features automatic leveling, if you suspect a calibration issue or notice consistent inaccuracies, refer to the full user manual for calibration procedures or contact customer support.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Laser lines are dim or not visible. | Low battery; Bright ambient light; Laser windows are dirty. | Charge or replace batteries; Use goggles (if included) or a laser receiver in bright conditions; Clean laser windows. |
| Alarm sounds and laser lines flash. | Device is tilted beyond its self-leveling range (±3°). | Place the device on a more level surface; If intentional, switch to manual mode by pressing and holding 'H' or 'V'. |
| Laser lines are not accurate. | Device not properly self-leveled; Impact damage; Calibration issue. | Ensure device is within self-leveling range; Check for physical damage; Refer to the full user manual for calibration checks. |
| Remote control not working. | Remote battery low/dead; Obstruction between remote and unit. | Replace remote control battery; Ensure clear line of sight to the unit's sensor. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | CONENTOOL |
| Model | LL03-ZC |
| Level Type | Laser Level |
| Laser Type | 16 Lines (4D) |
| Laser Wavelength | 515nM-535nM |
| Working Distance | 10~30M |
| Beam Color | Green |
| Laser Accuracy | 7m/±1.5mm |
| Automatic Leveling Range | 3±1° |
| Alarm Tilt Angle | 3±1° |
| Laser Level Class | Level 2 |
| Battery Capacity | 2400mAh / 3600mAh (optional) |
| Battery Quantity | 2 pcs |
| Working Voltage | 100~240V |
| Battery Life (8-wire state) | 3-4 hours |
| Display | Light display and buttons |
| Gross Weight (approx.) | 1.7kg (cloth bag) / 3.6-3.8kg (plastic box with tripod) |
| Certifications | CE, WEEE |
| Is Smart Device | Yes |
8. User Tips
- For best visibility in bright outdoor conditions, consider using the included goggles (if applicable) or a compatible laser receiver.
- Always ensure the laser level is placed on a stable surface or securely mounted to avoid accidental movement and maintain accuracy.
- When working on uneven surfaces, utilize the lifting platform or tripod for precise height adjustments to keep the device within its self-leveling range.
- Take advantage of the remote control for hands-free operation, especially when adjusting settings from a distance.
- Regularly check the battery indicator on the machine to avoid interruptions during critical tasks.
9. Warranty and Support
For detailed warranty information, technical support, or further assistance, please refer to the complete user manual provided with your product. A digital version of the user manual (PDF) can be accessed via this link: CONENTOOL Laser Level User Manual (PDF).
Please retain your proof of purchase for any warranty claims.
