1. Introduction
Thank you for choosing the LOEFME STS6-1028 Electric Dehumidifier. This appliance is designed to efficiently remove excess moisture from your indoor environment, helping to prevent mold, mildew, and musty odors, while improving air quality. With its multiple operating modes, quiet operation, and user-friendly features, it provides a comfortable and healthy living space. Please read this manual thoroughly before operating the dehumidifier and keep it for future reference.
2. Safety Instructions
To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:
- Read all instructions before using the appliance.
- Ensure the power supply matches the voltage specified on the rating label.
- Do not operate the dehumidifier with a damaged cord or plug.
- Keep the appliance away from heat sources, direct sunlight, and flammable materials.
- Do not block air inlets or outlets. Maintain at least 20 cm clearance around the unit.
- Always place the dehumidifier on a flat, stable surface.
- Do not immerse the unit, power cord, or plug in water or other liquids.
- Unplug the appliance before cleaning or performing any maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not use the dehumidifier in areas where water is likely to splash onto it.
- Do not use chemical solvents (e.g., benzene, alcohol, gasoline) to clean the unit.
3. Package Contents
Carefully unpack your dehumidifier and check that all items are present and in good condition. If any items are missing or damaged, please contact customer support.
- 1 × LOEFME Dehumidifier (Model: STS6-1028)
- 1 × Instruction Manual
- 1 × 1-meter Drainage Water Pipe
- 1 × 3-meter Drainage Water Pipe
4. Product Overview
4.1 Key Features
- High Dehumidification Capacity: Removes up to 10 liters of moisture per day.
- Large Water Tank: 1.5-liter capacity with automatic shut-off when full.
- Dual Drainage Options: Manual tank drainage or continuous drainage via included pipes.
- Multiple Operating Modes: Custom, Auto, and Dryer modes for versatile use.
- Quiet Operation: Operates at a low noise level (≤38dB).
- Adjustable Humidistat: Allows setting desired humidity levels (RH 20-90%).
- 24-Hour Timer: Schedule operation for convenience.
- Automatic Defrost: Ensures efficient operation in cooler temperatures (5°C-40°C).
- Child Lock: Prevents accidental changes to settings.
- Washable Air Filter: Easy to clean for improved air quality and unit longevity.
- Portable Design: Equipped with universal wheels and carrying handles for easy movement.
- LED Display: Clear digital display for humidity and settings.



4.2 Control Panel
The control panel features an intuitive LED display and touch buttons for easy operation.

- Humidity Display: Shows the current humidity level or target humidity.
- TANKFUL Indicator: Lights up when the water tank is full, and the unit automatically shuts off.
- RH%/Hr Button: Used to adjust the target humidity level or set the timer duration.
- TIMER Button: Activates and sets the 24-hour timer function.
- MODE Button: Cycles through Custom, Auto, and Dryer operating modes.
- POWER Button: Turns the dehumidifier ON or OFF.
- Child Lock: Press and hold specific buttons (refer to the control panel diagram for exact combination, usually Mode + Timer) to activate/deactivate.
5. Setup
5.1 Placement
- Place the dehumidifier on a firm, level surface in the area where dehumidification is needed.
- Ensure there is at least 20 cm (8 inches) of space around the unit for proper airflow.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas with excessive dust.
- The optimal working temperature range is 5°C to 40°C.
- The dehumidifier is suitable for areas up to 25m².
5.2 Drainage Options
Your LOEFME dehumidifier offers two drainage methods:

5.2.1 Manual Drainage (Water Tank)
- The dehumidifier will collect moisture in its internal 1.5-liter water tank.
- When the tank is full, the "TANKFUL" indicator will light up, the unit will beep, and automatically shut off.
- Carefully remove the water tank from the front of the unit.
- Empty the collected water.
- Slide the empty tank back into the unit until it clicks into place. The dehumidifier will resume operation.
5.2.2 Continuous Drainage (Drainage Hose)
For continuous operation without needing to empty the water tank, you can use the provided drainage hoses.
- Locate the continuous drainage outlet on the back or side of the dehumidifier (refer to the product diagram if available).
- Connect one end of the 1-meter or 3-meter drainage pipe to this outlet. Ensure a secure connection to prevent leaks.
- Route the other end of the hose to a suitable drain (e.g., floor drain, large bucket, sink). Ensure the hose is sloped downwards to allow gravity drainage.
- Make sure the hose is not kinked or blocked.
- Once connected, the dehumidifier will continuously drain collected water, bypassing the internal tank.

6. Operating Instructions
6.1 Power On/Off
- Plug the power cord into a suitable electrical outlet (220-240V).
- Press the POWER button on the control panel to turn the unit ON. The LED display will illuminate.
- Press the POWER button again to turn the unit OFF.
6.2 Selecting Operating Mode
Press the MODE button to cycle through the available operating modes:
- Auto Mode: The dehumidifier automatically adjusts its operation to maintain a comfortable ambient humidity level. This is an energy-saving and user-friendly design.
- Custom Mode: Allows you to manually set your desired target humidity level and timer.
- Dryer Mode: Designed for fast drying of clothes. The unit operates with continuous high fan speed and aims for a humidity level of 55% to quickly dry items and prevent odors.
6.3 Setting Target Humidity (Custom Mode)
- In Custom Mode, press the RH%/Hr button repeatedly to adjust the desired humidity level. The display will show the target humidity, which can be set between 20% and 90% Relative Humidity (RH).
- The unit will operate until the ambient humidity reaches the set target, then it will cycle on and off to maintain that level.
6.4 Timer Function
- Press the TIMER button to activate the timer function.
- Press the RH%/Hr button to set the desired operating duration, from 1 to 24 hours.
- The unit will automatically turn off after the set time has elapsed.
6.5 Child Lock
- To activate the Child Lock, press and hold the MODE and TIMER buttons simultaneously for a few seconds (or refer to the control panel diagram for the exact combination). A lock icon may appear on the display.
- When activated, all other buttons on the control panel will be locked to prevent accidental changes.
- To deactivate, repeat the same action.

7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your dehumidifier.
7.1 Cleaning the Water Tank
- When the water tank is full, empty it as described in the "Manual Drainage" section.
- Rinse the tank with clean water periodically to prevent mold or bacteria growth.
- Do not use harsh detergents or abrasive cleaners.
- Ensure the tank is completely dry before reinserting it into the unit.
7.2 Cleaning the Air Filter
The dehumidifier is equipped with a washable air filter to capture dust and particles.
- The air filter is located on the back or side of the unit (refer to product diagrams).
- Gently pull out the air filter.
- Wash the filter with warm, soapy water.
- Rinse thoroughly and allow it to air dry completely before reinserting.
- Clean the filter every 2-4 weeks, or more frequently if the unit is used in a dusty environment.

7.3 Storing the Dehumidifier
- If storing the unit for an extended period, ensure the water tank is empty and clean.
- Clean the air filter.
- Unplug the unit and coil the power cord neatly.
- Store the dehumidifier in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
Before contacting customer support, please refer to the following troubleshooting guide for common issues.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dehumidifier does not turn on. |
|
|
| No water collected or low dehumidification. |
|
|
| Unit is noisy. |
|
|
| Water leaks from the unit. |
|
|
| Child Lock is active and buttons don't respond. |
|
|
9. Specifications
| Attribute | Value |
|---|---|
| Brand Name | LOEFME |
| Model | STS6-1028 |
| Dehumidification Capacity | 10L/day (approx. 21 pints/day) |
| Water Tank Capacity | 1.5L |
| Coverage Area | 21-30㎡ (approx. 226-323 sq. ft.) |
| Rated Voltage | 220-240V |
| Rated Frequency | 50-60Hz |
| Rated Input Power | 135W (at 27°C, 60% RH) |
| Maximum Input Power | 165W (at 35°C, 80% RH) |
| Rated Input Current | 0.9A (at 27°C, 60% RH) |
| Maximum Input Current | 0.96A (at 35°C, 80% RH) |
| Suction Side Pressure | 0.6MPA |
| Emission Side Pressure | 1.6MPA |
| Air Volume | 100m³/h |
| Working Temperature Range | 5°C - 40°C |
| Working Humidity Range | 30% - 90% RH |
| Sound Level | ≤38dB |
| Dimensions (L x W x H) | 255 x 182 x 400mm |
| Functions | Automatic Bucket Full Shut-Off, Automatic Defrost, Bucket Full Indicator Light, External Drain Connect, LED Display, Removable Water Tank, Washable Air Filter, Child Lock, 24-hour Timer, Automatic Memory |
| Certification | CE |
10. User Tips
- Optimal Placement: For best results, place the dehumidifier in the center of the room or area you wish to dehumidify, away from walls and furniture to ensure unrestricted airflow.
- Close Doors and Windows: To maximize efficiency, keep doors and windows closed in the room where the dehumidifier is operating.
- Continuous Drainage for Basements: If using in a basement or laundry room where humidity is consistently high, utilize the continuous drainage feature with the provided hose to avoid frequent tank emptying.
- Regular Filter Cleaning: Clean the air filter regularly (every 2-4 weeks) to maintain air quality and the dehumidifier's efficiency. A clogged filter can reduce performance and increase energy consumption.
- Use Dryer Mode for Laundry: The dedicated Dryer Mode is excellent for speeding up the drying of clothes indoors, especially during damp weather, helping to prevent musty smells.
- Monitor Humidity: Use the LED display to monitor the current humidity and adjust your target humidity setting accordingly for optimal comfort and energy saving.
11. Warranty and Support
LOEFME products are manufactured to the highest quality standards. For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.