Cugo CA57YGS

Contents

Cugo CA57YGS 12MP 6K Solar Security Camera User Manual

Model: CA57YGS

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Cugo CA57YGS 12MP 6K Solar Security Camera. Please read this manual thoroughly before using the product and retain it for future reference.

Important Notes:

  • The upper lens can only be adjusted manually. The main lens supports mobile gimbal control (Pan/Tilt/Zoom).
  • Before first use, please fully charge the camera (approximately 5-6 hours).

2. Setup and Installation

2.1. Downloading the Yoosee App

The camera operates with the Yoosee application. To download the app:

  1. Search for "Yoosee" in your mobile device's App Store (iOS) or Google Play Store (Android).
  2. Alternatively, scan the QR code provided in the product packaging or on the device itself to download the "Yoosee" mobile APP.
Cugo CA57YGS camera with solar panel and phone showing app interface
Image: Cugo CA57YGS camera with solar panel, illustrating the app download process via QR code (not shown) and app interface.

2.2. Account Registration

New users must register an account to use the Yoosee App:

  1. Click "Register" within the app.
  2. Select your "Registration Location".
  3. Enter your mobile phone number or email address.
  4. Click "Next" and follow the on-screen prompts to complete registration and log in.

Important:

  • In some countries/regions, mobile phone number registration may not be supported. Please use your email address in such cases.
  • Data services may not be compatible across different registered countries/regions. Ensure you select the correct region during registration.

2.3. Device Power-On and Reset

Before connecting the camera to the app:

  1. Power up the device.
  2. Wait approximately 30 seconds. The camera should emit "Please scan the QR code to add the device" and a continuous "du du" sound.
  3. If you do not hear these prompts, press and hold the RESET button until the camera beeps "di" and then wait for the device to reboot.
Close-up of the camera showing the SIM card port, SD card port, and Reset button
Image: Location of the SIM Card Port, SD Card Port, and Reset Button on the camera.

2.4. Adding the Camera to the App

  1. Open the Yoosee App.
  2. Click the "+" icon in the upper right corner of the app interface.
  3. Navigate to "Prepare Camera", then scan the QR code located on the camera.
  4. Follow the in-app prompts to complete the device addition process.

2.5. Connection Precautions

  • Ensure that the positioning and Bluetooth permissions for the Yoosee App are enabled on your mobile device.
  • Some cameras do not support 5G Wi-Fi. Verify that your mobile phone is connected to a 2.4G Wi-Fi network.
  • Maintain a distance of no more than 10 meters between the camera and the router.
  • Confirm that the Wi-Fi password is correct and pay attention to case sensitivity.

2.6. Installation Methods

The camera offers multiple installation options to suit various environments:

Diagram showing integrated and separated installation methods for the solar camera
Image: Examples of integrated installation (camera and solar panel together) and separated installation (camera and solar panel mounted apart).
  • Integrated Installation: Mount the camera and solar panel together, ideal for direct sunlight exposure.
  • Separated Installation: Mount the camera and solar panel in different locations, allowing the solar panel to be placed in an optimal sunlit area while the camera is positioned for surveillance.

3. Operation

3.1. Product Demonstration Video

Video: A short demonstration of the camera's features, including its waterproof design, 360-degree rotation, and solar power capabilities.

3.2. Remote PTZ Control

Control the camera's pan, tilt, and zoom functions remotely using the Yoosee App. Rotate the camera with your fingers (Up, Down, Left, and Right) to adjust the viewing angle.

Smartphone screen showing remote PTZ control interface for the camera
Image: Remote PTZ control via the mobile application, showing pan and tilt ranges.

3.3. Two-Way Audio

The camera features a built-in microphone and speaker, enabling two-way audio communication. You can listen to the environment and speak through the camera in real-time using the app.

Person speaking through the camera to a delivery person at the door
Image: Illustration of two-way audio functionality, allowing communication with visitors.

3.4. Smart Night Vision Mode

The camera is equipped with built-in IR LEDs and spotlights, offering both color and infrared night vision modes. This allows for clear visibility of objects in color even at night.

Comparison of day mode and smart night vision mode (color at night)
Image: Comparison showing clear color vision during the day and smart color night vision at night.

3.5. Motion Detection and Instant Alerts

The camera supports customizable motion detection. When motion is detected, the camera will send instant alerts to your connected mobile device.

Smartphone receiving an instant alert notification for motion detection
Image: A smartphone displaying a notification for motion detection, indicating surveillance activity.

3.6. PIR Human Detection

The camera features Passive Infrared (PIR) human detection. It can automatically wake up from sleep mode and begin recording when human movement is detected, conserving battery life by not recording continuously.

Diagram showing PIR human detection waking up the camera to record
Image: A diagram illustrating how PIR human detection triggers the camera to record, while it remains in auto-sleep mode without recording when no human presence is detected.

3.7. SD Card & Cloud Storage

The camera supports local storage via a TF (MicroSD) card and cloud storage options.

  • TF Card: Supports up to 256GB TF card storage.
  • Cloud Storage: Cloud services require a subscription. If unused, they will automatically deactivate after non-payment.
Close-up of camera ports for SIM card, SD card, and Reset button, with icons for cloud and SD card storage
Image: Detailed view of the SIM Card Port, SD Card Port, and Reset button, along with icons representing cloud and SD card storage options.

3.8. Remote Access

Access your camera's live feed and recordings from anywhere at any time. Scan the QR code (for app download) to enable remote access and view on your phone, tablet, or PC.

Multiple devices (phone, tablet, laptop) showing remote access to the camera feed
Image: Remote viewing of the camera feed on a smartphone, tablet, and laptop, highlighting multi-device access.

4. Maintenance

4.1. General Cautions

  • Always disconnect the power supply before inserting or removing the SD card to prevent damage.
  • Avoid installing the product in environments with high temperatures, high humidity, excessive dust, or smoke, as this may cause equipment damage.

4.2. SD Card Management

  • The camera supports SD cards up to 256GB, formatted as FAT32/exFAT.
  • The device utilizes loop recording technology. When the SD card is full, the camera will automatically overwrite the earliest recorded video.

4.3. Firmware Updates

The Yoosee App and device firmware are subject to periodic updates. If prompted, please upgrade online to ensure optimal performance and access to the latest features.

5. Troubleshooting (FAQs)

Q: The camera can't connect to Wi-Fi?

A: 1. Ensure the entered Wi-Fi password is correct. Try rebooting your router and re-adding the camera. 2. Confirm that the camera supports 5G Wi-Fi; if not, ensure your mobile phone is connected to a 2.4G Wi-Fi network. Your Wi-Fi router should not have options like AP isolation or anti-dawdling enabled that restrict Wi-Fi access. Some mobile phones require positioning permissions to be enabled to detect Wi-Fi networks.

Q: What should I do if the camera is offline in the camera list?

A: Check if the network connected to the camera is functioning normally. If an SD card is installed, remove it, then reboot both the camera and the router to see if the camera comes online. If the issue persists, perform a factory reset on the camera (long-press the "RESET" button until it beeps) and then re-add it. Also, check for software updates to ensure both the app and camera firmware are the latest versions.

Q: What if the camera is offline after I change the router or change the Wi-Fi password?

A: The camera stores the original Wi-Fi password. When the password changes, it can no longer connect. You must first reset the camera (long-press the "RESET" button until it beeps) and then re-add it to the app following the setup prompts.

Q: What should I do if I can't watch the video on the card playback?

A: Verify that the video recording switch is enabled. If it is enabled but no video is playing, go to [Settings] - [Video Settings] in the app and format the SD card. If the problem continues after formatting, it is recommended to replace the SD card with a new one.

6. Specifications

FeatureSpecification
Brand NameCugo
Model NumberCA57YGS
Megapixels12MP (6K resolution, 6MP per lens)
Lens QuantityTri-Lens
Lens (mm)3.6mm
Zoom TypeDigital zoom (10X)
Viewing Angle360°
Movement Range (Pan)0°-360°
Movement Range (Tilt)-10°-180°
Video Compression FormatH.265
SensorCMOS
Color Night VisionYes
IR Distance15 meters
Audio OutputTwo Way Audio
AI FunctionsMotion Detection
Alarm TypeTelefon Alarm, Local Alarm, FTP Photo, Email Photo, Double induction confirmation and push alarm information mobile phone
Connectivity4G
Supported Mobile SystemsSymbian, Windows Mobile, Android, iOS
Supported Operating SystemsWindows 98, Windows XP, Windows Vista, Windows 7, macOS, Windows 8, Windows 10, Windows 2000, Windows 2008, Windows 2003
Power SourceBattery Powered, Normal, Mains Electricity, Solar Powered
Battery CapacityBuilt-in 20000mAh battery
Operating Temperature-10°C to 60°C
IP RatingIP68 (Waterproof / Weatherproof)
SceneIndoor and outdoor
InstallationCeiling, Embedded, Side, Wall Mounted, Pendant Mount, Vertical Pole Mount
Shell MaterialPlastic
TF Card Support32G, 64G, 128G, 256G
Internal Storage256GB
CertificationCE
OriginMainland China
4G Bands SupportedB1/B3 / B5 / B7 / B8 / B20/B28

7. User Tips

  • SIM Card Compatibility: Before purchasing or using a 4G SIM card, please verify that your country's network operator supports the camera's frequency bands (B1/B3 / B5 / B7 / B8 / B20/B28). The camera will not function with SIM cards outside these supported bands.
  • Initial Charge: For optimal performance, fully charge the camera for 5-6 hours before its first use.
  • PC Monitoring: If you wish to monitor the device on a Windows computer, download and install the Yoosee PC client from www.yoosee.co.

8.1. Technical Support

For technical assistance, please contact: support@gwell.cc

8.2. User Manual (PDF)

A detailed user manual in PDF format is available for download. You can find it by referencing the link: User manual (PDF)

8.3. Disclaimer

⚠️ Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of this product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.