1. Introduction
The Rapoo VT0 Air MAX is a high-performance wireless gaming mouse designed for esports enthusiasts. It features an ultra-lightweight design at approximately 39g, a flagship PAW3950 optical sensor, and supports up to 8K polling rate for exceptional precision and responsiveness. This manual provides detailed instructions for setting up, operating, customizing, and maintaining your VT0 Air MAX gaming mouse.
2. Safety Warnings
- Small Parts: This product contains small parts (e.g., USB receiver) which may pose a choking hazard. Keep out of reach of small children.
- Battery Safety: Do not attempt to disassemble, puncture, or expose the internal battery to extreme temperatures or fire.
- Liquid Exposure: Avoid exposing the mouse to liquids or excessive moisture.
- Cleaning: Use a dry, soft cloth for cleaning. Avoid harsh chemicals or abrasive materials.
- Operating Environment: Use the mouse in a stable environment, away from direct sunlight and extreme temperatures.
3. Package Contents
Ensure all the following items are included in your package:
- Rapoo VT0 Air MAX Wireless Gaming Mouse
- USB-C Super Speed Cable
- 2.4GHz Nano Receiver
- Grip Tape Set (3 patterns)
- Extra Set of PTFE Skates
- Documentation (User Manual, Warranty Card)


4. Specifications
| Feature | Specification |
|---|---|
| Model | VT0 Air MAX |
| Sensor | PAW3950 Optical Sensor |
| DPI | Up to 30,000 DPI (adjustable 10-45000 DPI) |
| Tracking Speed | 750 IPS |
| Acceleration | 50G |
| Polling Rate | Wireless/Wired: 125Hz, 250Hz, 500Hz, 1000Hz, 2000Hz, 4000Hz, 8000Hz |
| Response Speed | 0.125ms (8000Hz) |
| Weight | Approx. 39g ± 3G |
| Dimensions | 119mm (L) x 64mm (W) x 39mm (H) |
| Connectivity | 2.4GHz Wireless (with Nano Receiver), Wired (USB-C) |
| Buttons | 5 independent buttons + 1 scroll wheel (7 programmable buttons) |
| Programmable Buttons | 8 |
| Battery Life | Up to 275 hours (1K polling rate, RGB off); 50 hours (8K polling rate) |
| Charging Port | USB-C |
| Micro Switches | Gold-Plated, 80-million click rating |
| Skates | Pure PTFE |
| MCU | Nordic 54 Series |



5. Setup Guide
5.1 Initial Charging
Before first use, it is recommended to fully charge your Rapoo VT0 Air MAX mouse. Connect the provided USB-C Super Speed Cable to the mouse and a powered USB port on your computer or a USB charger. The battery indicator will show charging status.
5.2 Wireless Connection (2.4GHz)
- Insert the 2.4GHz Nano Receiver into an available USB port on your computer.
- Turn on the mouse using the power switch located on the bottom.
- The mouse should automatically connect to the receiver. If not, press the pairing button (if available, refer to specific button layout) or re-insert the receiver.
5.3 Wired Connection
Connect the USB-C Super Speed Cable directly from the mouse to your computer's USB port. The mouse will function in wired mode and charge simultaneously.
5.4 Software Installation (A Hub)
For full customization and advanced features, download and install the Rapoo A Hub software from the official Rapoo website. This software allows you to configure buttons, DPI settings, polling rates, RGB lighting, and manage profiles.


5.5 8K Polling Rate Note
Utilizing the 8K polling rate feature requires a high-end CPU (Intel i7/Ryzen 7 or better) to ensure stable performance and prevent system bottlenecks. Wireless 8K functionality may require a firmware update via the Rapoo software.
6. Operating Instructions
6.1 Button Functions
The VT0 Air MAX features 7 programmable buttons and a scroll wheel. The default functions are:
- Left Click: Primary action.
- Right Click: Secondary action/context menu.
- Scroll Wheel Click (Middle Button): Default action (e.g., open new tab).
- Scroll Wheel Up/Down: Scroll content.
- Forward Side Button: Navigate forward in browsers/applications.
- Backward Side Button: Navigate backward in browsers/applications.
- DIY Independent Key: Customizable button, often used for DPI cycle or profile switching.

6.2 DPI Adjustment
The mouse supports adjustable DPI settings up to 30,000. You can cycle through preset DPI levels using the dedicated DPI button (often the DIY key by default) or customize them via the A Hub software. The Nano 8K receiver features indicator lights to show the current DPI level:
- Red: DPI Level 1
- Orange: DPI Level 2
- Yellow: DPI Level 3
- Green: DPI Level 4
- Cyan: DPI Level 5
- Blue: DPI Level 6
- Purple: DPI Level 7


6.3 Polling Rate Adjustment
The polling rate can be adjusted from 125Hz up to 8000Hz via the A Hub software. Higher polling rates provide more frequent updates to your computer, resulting in smoother and more responsive cursor movement, especially beneficial in competitive gaming.

6.4 Performance Modes
The A Hub software allows you to select different performance modes to optimize the mouse for various tasks:
- Furious Competitive Mode: Maximizes sensor performance (≥20000FPS static scan rate) for precise and sensitive tracking.
- High Performance Mode: Optimized for demanding gaming scenarios.
- Low Power Mode: Balances performance with power efficiency for extended battery life.
- Office Mode: Designed for general productivity and power saving.


6.5 Smart Surface Calibration
The PAW3950 sensor features smart surface calibration, allowing it to automatically adapt to various mousepad materials for consistent tracking performance. This can be further fine-tuned via the A Hub software.
7. Customization
The Rapoo VT0 Air MAX offers extensive customization options through the A Hub software:
- Programmable Buttons: Remap all 7 buttons and assign macros for complex commands.
- Onboard Memory: Save up to 6 custom profiles directly to the mouse for instant switching without software.
- RGB Lighting Zones: Customize the 16.8 million color RGB lighting with multiple effects to match your setup.
- Software Features: The A Hub software provides real-time performance monitoring, a surface calibration wizard, advanced macro programming, and firmware update notifications.
8. Power Management
8.1 Battery Life
The VT0 Air MAX is equipped with a 300mAh battery, offering impressive endurance:
- 1K Polling Rate: Up to 275 hours of continuous use.
- 2K Polling Rate: Approximately 200 hours.
- 4K Polling Rate: Approximately 60 hours.
- 8K Polling Rate: Approximately 50 hours.


8.2 Charging
The mouse supports fast charging via its USB-C port. A quick 15-minute charge can provide up to 30 hours of gameplay, and 1 minute of charging can provide 6.5 hours of use. The mouse can be used while charging in wired mode.


8.3 Battery Indicator
The mouse features a 4-level LED battery indicator to show the current power status. Refer to the A Hub software for more precise battery percentage.
8.4 Power Optimization Tips
- RGB Management: Disable or reduce RGB lighting effects to significantly extend battery life.
- Sleep Timer: Set an automatic sleep timer (e.g., 5 minutes) via the software to conserve power when idle.
- Performance Mode: Switch to 'Low Power' or 'Office' mode when not gaming to optimize battery usage.
9. Maintenance
9.1 Cleaning
- Mouse Body: Use a soft, dry, lint-free cloth to wipe the mouse. For the carbon fiber composite shell and skin-friendly coating, avoid harsh chemicals or abrasive cleaners.
- Sensor: Gently clean the optical sensor lens with a cotton swab or compressed air to remove dust and debris.
- PTFE Skates: Keep the PTFE skates clean and free of dirt to ensure smooth gliding. Replace them with the extra set provided if they show significant wear.

9.2 Firmware Updates
Regularly check for firmware updates via the Rapoo A Hub software. Firmware updates can improve performance, add new features, and fix bugs. Follow the on-screen instructions carefully during the update process.
10. Troubleshooting
- Mouse not responding:
- Ensure the mouse is charged.
- Check if the 2.4GHz Nano Receiver is securely plugged into a USB port.
- Try a different USB port.
- If using wireless, ensure the mouse is turned on.
- Try connecting the mouse in wired mode to see if it functions.
- Lag or stuttering cursor:
- Ensure the mousepad surface is clean and suitable for optical tracking.
- Reduce the polling rate if your CPU is not high-end (Intel i7/Ryzen 7 or better is recommended for 8K polling).
- Check for interference from other wireless devices.
- Update mouse firmware via A Hub software.
- DPI/Button settings not saving:
- Ensure the A Hub software is running and settings are applied.
- Save profiles to the onboard memory.
- Battery draining quickly:
- Disable or reduce RGB lighting effects.
- Adjust the sleep timer in the A Hub software.
- Lower the polling rate.
11. User Tips
- Optimal Performance: For competitive gaming, use the wired connection or ensure your system meets the requirements for 8K wireless polling.
- Customization: Experiment with different DPI settings and performance modes to find what best suits your playstyle and game.
- Grip Tape: Utilize the included grip tape to enhance control and comfort, especially during intense gaming sessions.
- Regular Updates: Keep your mouse firmware and A Hub software updated to benefit from the latest improvements and features.
12. Warranty & Support
The Rapoo VT0 Air MAX Gaming Mouse typically comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.
For technical support, driver downloads, or further assistance, please visit the official Rapoo website or contact their customer service. Keep your product's serial number handy when seeking support.