1. Introduction
Thank you for choosing the CUKTECH 10 Magnetic Power Bank Air. This portable power bank is designed for fast and efficient charging, featuring both wired and magnetic wireless charging capabilities, a high-definition TFT screen, and advanced safety features. This manual provides essential information for safe and optimal use of your device.
2. Package Contents
Please check the package for the following items:
- CUKTECH 10 Magnetic Power Bank Air
- Data Cable (USB-C to USB-C)
- Instruction Manual
3. Setup and Initial Use
3.1 Charging the Power Bank
Before first use, fully charge your CUKTECH 10 Magnetic Power Bank Air. Connect the provided USB-C cable to the power bank's USB-C input port and a compatible power adapter (not included). The TFT screen will display charging status.
3.2 Attaching to Your Device (Magnetic Charging)
For magnetic charging, ensure your device is compatible with magnetic wireless charging. Align the power bank with the back of your device. The silicone surface provides a snug fit and strong magnetic adsorption.
4. Operating Instructions
4.1 Powering On/Off and Reset
- To power off or reset the device, long press the 5-second button on the main interface.
4.2 Charging Modes
The CUKTECH 10 Magnetic Power Bank Air supports three primary charging modes:
- Wired Charging: Connect your device to the power bank using the USB-C cable. The power bank automatically switches to wired charging when plugged in.
- Magnetic Wireless Charging: After disconnecting the wired cable, press the power button to activate wireless magnetic charging. Double-click the power button to re-enable wireless charging if it stops.
- Friend-sharing Charger: Use the power bank to charge another device via wired connection while simultaneously charging your own device wirelessly (if supported).
4.3 TFT High-Definition Universal Screen
The integrated TFT screen provides real-time information about the power bank's status:
- Charge/Discharge Power Visualization: Displays the current power percentage and charging/discharging status.
- Interface Usage Visualization: Shows which ports (USB-C, Wireless) are active with corresponding icons.
- Self-charging UI Flip: The screen orientation can be adjusted 180 degrees when the power bank is self-charging.
- Keep Screen On: Long press for 2 seconds to switch between custom screen always-on or 60s brightness settings.
- Safe Charging Ready: A reliable icon prompt indicates when safe charging is active.
4.4 OPC Safe Charge 2.0
The power bank features OPC Safe Charge 2.0 for enhanced safety:
- Source Temperature Control: Monitors and controls the temperature during charging.
- Automatic Charging Stop: Automatically stops charging to prevent overcharging and protect battery health.
- To turn on/off Safe Charge mode, long press the power button for 2 seconds. Note that Safe Charge 2.0 only works when using Type-C port output.
5. Specifications
| Feature | Detail |
|---|---|
| Model | WPB100P |
| Battery Capacity | 10000mAh (38.5Wh) |
| Rated Capacity | 6100mAh (TYP 5V 3A) |
| Input Interface | USB Type C |
| Output Interface | USB-Type C, Wireless |
| USB-C Input | 5V=3A, 9V=2A (18W Max) |
| USB-C Output | 5V=3A, 9V=2.22A, 10V=2.25A, 12V=1.67A (22.5W Max) |
| Wireless Output | 5W/7.5W/10W/15W (15W Max) |
| Combined USB-C + Wireless Output | 15W Max |
| Shell Material | Plastic |
| Battery Type | Lithium Polymer Battery (New Generation Silicon-Carbon Anode Battery) |
| Certifications | FCC, CE, CCC Certified |
| Dimensions | 120mm x 68mm x 20mm |
| Energy Density | 737Wh/L (approx. 30% higher than conventional batteries) |
| Magnets | 15 high-performance N56 ultra-thin magnets |
6. Maintenance and Care
- Keep the power bank away from water, moisture, and extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Clean the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use.
7. Troubleshooting
- Power bank not charging: Ensure the charging cable is securely connected to both the power bank and the power adapter. Try a different cable or adapter.
- Device not charging from power bank: Check if the power bank has sufficient charge. Ensure the charging cable is properly connected to your device and the power bank. For wireless charging, ensure proper alignment and that wireless charging is activated (press power button).
- Wireless charging stops unexpectedly: Double-click the power button to re-enable wireless charging.
- Screen not displaying information: Ensure the power bank is powered on. If the screen is set to 60s brightness, it may turn off after a period of inactivity. Long press the power button for 2 seconds to adjust screen settings.
- Overheating: If the power bank feels excessively hot, disconnect it immediately from all devices and power sources. Allow it to cool down before resuming use. The OPC Safe Charge 2.0 is designed to prevent overheating during Type-C output.
8. User Tips
- For optimal magnetic charging, ensure your phone case (if any) is compatible with magnetic accessories and does not interfere with the magnetic connection.
- Utilize the self-storing detachable braided cable for convenient wired charging on the go.
- Monitor the TFT screen for real-time charging status and battery levels to manage your power efficiently.
- Remember to long press the power button for 2 seconds to toggle Safe Charge mode when using Type-C output for enhanced battery protection.
9. Warranty and Support
For warranty information, technical support, or any inquiries regarding your CUKTECH 10 Magnetic Power Bank Air, please refer to the official CUKTECH website or contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.