CLIBABIQBOX TV98 ATV Stick

Contents

TV98 ATV Stick User Manual

Model: TV98 ATV Stick | Brand: CLIBABIQBOX

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your TV98 ATV Stick. Please read this manual carefully before using the device to ensure proper functionality and to maximize your viewing experience.

The TV98 ATV Stick is a smart TV box equipped with Android 14.0, supporting voice search and a wide range of content. It features an Allwinner H313 Quad Core processor, 4G/5G Dual WiFi, Bluetooth 5.0, and supports HD 8K and 4K@60fps video decoding.

TV98 ATV Stick with remote and packaging, highlighting 8GB+128GB, Wifi 6, Android 14, HDR10+, 2.4G+5G, BT 5.0, 8K Ultra HD, 4K Ultra HD, Voice features.
TV98 ATV Stick with its key features and accessories.

2. Safety Information

Please observe the following safety guidelines:

  • Warning: Do not use the device when wet.
  • Maintenance and Cleaning: Do not allow water to enter the interior of the device during maintenance and cleaning to avoid short circuits and electric shock risks.

3. Package Contents

Ensure all the following items are included in your package:

  • 1 x TV98 ATV Stick
  • 1 x Voice Remote Control
  • 1 x User Manual
  • 1 x HDMI Cable
  • 1 x USB Charging Cable
Image showing the packing list: TV98 ATV Stick, Voice Remote Control, User Manual, HDMI Cable, USB Charging Cable.
Contents of the TV98 ATV Stick package.

4. Setup Instructions

4.1. Physical Connection

  1. Connect the TV Stick to your TV through an HD extension cable, or directly connect the TV Stick to the TV's HDMI port.
  2. Connect the IR extension cable to the TV Stick, and paste the IR receiver onto the front end of the TV.
  3. Power supply through the Type-C cable, from a 5V/2A power adapter.
Diagram showing easy installation steps for the TV Stick: 1. Connect TV Stick to TV via HDMI. 2. Connect IR remote receiver. 3. Power supply via Type-C cable from 5V/2A adapter.
Physical connection steps for the TV98 ATV Stick.
Diagram illustrating TV Box Connection Settings: Turn on TV to HDMI mode, connect HDMI cord to TV Box and TV, connect power adapter, and connect wireless mouse/keyboard to USB interface.
TV Box Connection Settings.

4.2. Network Connection (Wi-Fi)

  1. Go to 'Settings' and select 'Wi-Fi'.
  2. The system will automatically scan for available wireless access points.
  3. Select your desired access point and enter the password.
  4. After successful verification, an IP address will be provided, and 'Connected' will be displayed.

4.3. Network Connection (Ethernet)

Note: Wi-Fi and Ethernet connections are mutually exclusive.

  1. Click 'Ethernet' in the network settings. The box will automatically initiate the DHCP process.
  2. When an Ethernet cable is plugged in, the box will automatically stop the Wi-Fi connection and initiate the Ethernet connection.
  3. The network connection is available when an IP address appears.

4.4. Bluetooth Remote Control Pairing

  1. Place the remote control within 30cm of the TV box.
  2. Press the 'OK' and 'VOL+' buttons on the remote control simultaneously.
  3. When the indicator light of the remote control flashes, release the buttons. The device status will show 'Connected'.
Diagram illustrating One Key Support Infrared Learning for the remote control. Steps include pressing and holding the TV button for 3 seconds, then pressing the power button on the infrared remote control.
Infrared Learning for Remote Control.

5. Operating Instructions

5.1. Basic Navigation

Use the provided voice remote control to navigate the Android TV interface. The directional pad and 'OK' button are used for selection and movement. The 'Back' and 'Home' buttons allow you to return to previous screens or the main menu.

5.2. Voice Control

The TV98 ATV Stick supports voice control. Press the dedicated voice button on your remote control and speak commands or search queries. The voice remote control supports multi-language recognition including English, German, Dutch, French, Portuguese, Spanish, Danish, Finnish, Hebrew, Italian, Japanese, Korean, Malay, Russian, Arabic, Thai, Turkish, Swedish, etc.

5.3. App Usage

The device comes pre-installed with popular apps like YouTube, Netflix, and Disney+. You can access more applications through the app store.

Screenshot of the TV98 ATV Stick interface showing various apps like YouTube, Netflix, Disney+, and an app store icon.
Accessing applications on the TV98 ATV Stick.

5.4. Media Playback

The TV98 ATV Stick supports various video and audio formats, allowing you to play local media files from USB storage or stream content from online services.

Demonstration of TV98 ATV Stick setup, remote pairing, Wi-Fi connection, and app usage.

6. Maintenance

6.1. Cleaning

To clean the device, use a soft, dry cloth. Do not use liquid cleaners or sprays, as they may damage the device or cause electric shock.

6.2. Software Update

  1. Copy the OTA-zip file to a TF card or USB storage device.
  2. Insert the HDMI cable and the TF card (or USB storage device).
  3. Connect the other end of the HDMI cable to the TV's HDMI port.
  4. Insert a stick into the hole at the bottom of the device (where the reset button is located) and continue to press it.
  5. Plug in the power adapter while still pressing the reset button.
  6. Hold the reset button until Android restarts.
  7. Using the remote, select "Update from EXT app" → "Update from TF card" (or "Udisk" if using a USB storage device) → select "xxx.zip (upgrade package file)" and press "OK".
  8. The screen will display "--install/SD card..." indicating the upgrade is in progress. After completion, it will show "Installation from SD card complete".
  9. Use the remote to select "Reboot system now" and press "OK", or plug in the power adapter again to restart the device.
  10. The upgrade is complete, and the "Welcome" screen will appear. You can check the build number in the settings to confirm the update.

6.3. Factory Reset

If the remote control cannot work or for general troubleshooting, you may perform a factory reset:

  1. Use a computer mouse to navigate the interface (click the right key to enter the UI).
  2. Go to 'Settings' → 'Device Preferences' → 'Reset'.
  3. The device will restart itself after the factory reset. You can then pair the remote again by long-pressing the right and left keys together until it pairs successfully.

7. Troubleshooting

7.1. Power Issues

  • Check that the power adapter is correctly connected to the power source and the TV box.
  • Press the power button on the remote to turn it on.
  • Ensure the status indicator light on the box is blue when powered on.

7.2. No Picture

  • Reconnect the HDMI cable or AV cable.
  • Check that the TV is on and set to the correct input.

7.3. No Sound or Distorted Sound

  • Adjust the volume on both the TV and the TV box.
  • Check that the speakers are correctly connected.
  • If using digital output, check digital connections and amplifier setup.
  • During movie playback, the set-top box may not support the audio codec. Try changing the supported audio in the playback menu.

7.4. Remote Control Issues

  • Point the remote control directly at the sensor on the front of the TV box.
  • Shorten the distance between the remote control and the TV box.
  • Replace the batteries in the remote control.
  • If the player doesn't respond to commands during playback, the system may have stopped. Reinsert the power adapter to restart the TV box.

7.5. USB Flash Drive Issues

  • The USB flash drive format may be incompatible with the box.
  • If a USB drive cannot be read, turn off the TV box for 30 seconds and then restart it.
  • Large file sizes or high-resolution USB flash drives may take longer to read and display.

7.6. Blank TV Screen, Player LED Flashing

  • Turn off the TV box, wait 30 seconds, and then turn it back on.
  • If in HD mode, check that the HD connection is correct, try a different HD cable, or set the TV box's output resolution to 720p.

8. Specifications

8.1. System Configuration

  • OS: Android 14.0 + ATV
  • CPU: H313 Quadcore Cortex-A53
  • GPU: Mali-G31 MP2
  • FLASH: 8/16/64/128GB (depending on model)
  • SDRAM: 1/2/4/8GB (depending on model)
  • Power Supply: DC 5V/2A
  • CODE: 18.1
  • WIFI: 2.4G + 5G
  • Bluetooth: BT5.0
  • 3D: Hardware 3D graphics acceleration

8.2. Main Features

Amlogic Video Engine (AVE) with dedicated hardware decoders and encoders.

  • Support multi-video decoder up to 4K@60fps.
  • Supports multiple “secured” video decoding sessions and simultaneous decoding and encoding.

Video/Picture Decoding:

  • VP9 Profile-2 up to 4K@30fps
  • H.265 Main10@L5.1 up to 4K@60fps
  • AVS2 JiZhun 10bit Profile up to 4K@60fps
  • H.264 BP/MP/HP@L4.2 up to 4K@30fps
  • H.263 BP up to 1080P@60fps
  • MPEG-4 SP/ASP@L5 up to 1080P@60fps
  • MPEG-2 MP/HL up to 1080P@60fps
  • MPEG-1 MP/HL up to 1080P@60fps
  • Xvid up to 1080P@60fps
  • Sorenson Spark up to 1080P@60fps
  • VP8 up to 1080P@60fps
  • AVS/AVS+ JiZhun Profile up to 1080P@60fps
  • WMV9/VC1 SP/MP/AP up to 1080P@60fps
  • JPEG HFIF file format up to 45M PPS
  • Multiple language and multiple format sub-title video support
  • MJPEG and JPEG unlimited pixel resolution decoding (ISO/IEC-10918)
  • Supports JPEG thumbnail, scaling, rotation and transition effects
  • Supports *.mkv,*.wmv,*.mpg, *.mpeg, *.dat, *.avi, *.mov, *.iso, *.mp4, *.rm and *.jpg file formats

Audio:

  • Supports MP3, AAC, WMA, RM, FLAC, Ogg and programmable with 7.1/5.1 down-mixing.
  • Built-in serial digital audio SPDIF/IEC958 input/output and PCM input/output.
  • Two DAC channels.
  • Supports 1 audio output interface (differential LINEOUTP/N or single-end LINEOUTL/LINEOUTR).
  • One Audio HUB, supporting internal mixing function.
  • Embedded 3 I2S/PCM (I2S0 for extended audio codec, I2S2 for BT, I2S3 for digital power amplifier).
  • Supports Left-justified, Right-justified, Standard I2S mode, PCM mode, and TDM mode.
  • I2S mode supports 8 channels, and 32-bit/192kbit sample rate.
  • I2S and TDM modes support maximum 16 channels, and 32-bit/96kbit sample rate.
  • One OWA OUT interface, supporting 16-/20-/24-bit inputs and outputs.
  • Integrated digital microphone (DMIC), supporting maximum 8 digital PDM microphones.

Image: HD JPEG, BMP, GIF, PNG, TIF

Language: English, French, German, Spanish, Italian, etc. multilateral languages. The voice remote control supports multi-language recognition.

9. User Tips

  • Power Adapter: Always use a 5V/2A power adapter for the TV Stick. Some TV USB ports only provide 5V/0.5A, which is insufficient and may prevent the device from turning on correctly.
  • Remote Pairing: If your remote control is unresponsive, try performing a factory reset and then re-pair the remote by long-pressing the right and left keys simultaneously until it connects.
  • Netflix Issues: If you encounter issues with Netflix, contact customer service for the latest version of the APK.
  • Memory Card Issues: If a memory card (e.g., 64GB) shows abnormal behavior or its capacity cannot be viewed in settings, check its contents in the file folder. If there's a reading error, remove the card, wipe the golden contact surface, and reinsert it.

10. Warranty and Support

The TV98 ATV Stick comes with a 12-month guarantee. For any questions or support needs, please contact the seller directly. A detailed user manual is also available in PDF format for download: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.