Ambition Ninja Max 280P Brushless Motor Tattoo Machine User Manual

1. Product Overview

The Ambition Ninja Max 280P is a new addition to the NINJA series of tattoo machines, featuring a powerful brushless motor and a user-friendly design. This wireless tattoo pen is engineered for stable performance and strong power, ensuring smooth needle drive and preventing overheating or instability during operation. It is optimized for reliable performance at higher voltages, making it suitable for bold lines, color packing, and solid shading.

Figure 1: Ambition Ninja Max 280P Tattoo Machine

2. Specifications

The Ambition Ninja Max 280P is built with high-quality materials and advanced technology to deliver consistent performance.

Figure 2: Detailed Specifications of the Ninja Max 280P

3. Package Contents

Ensure all items are present in your package:

• 1 x Ambition Ninja Max 280P Tattoo Machine (4.5mm stroke)
• 1 x 3.5mm Stroke Accessory
• 1 x Type-C Charging Cable
• 1 x Brand Zipper Bag

Figure 3: Included items in the product package

4. Setup

4.1 Attaching the Needle Cartridge

Twist your desired needle cartridge onto the machine's grip until it is securely seated. Ensure the needle is properly aligned.

4.2 Adjusting Stroke Length

The machine comes with a 4.5mm stroke installed and includes a 3.5mm stroke accessory. To change the stroke, carefully disassemble the relevant part of the machine as per the diagram below and replace the stroke cam. Ensure all components are reassembled correctly and securely.

Figure 4: Direct Drive System and Stroke Adjustment

4.3 Ergonomics and Handling

The Ambition Ninja Max 280P is designed for artists who prefer a solid, heavy feel, providing excellent balance and stability during long sessions.

Figure 5: Machine held for tattooing, illustrating its ergonomic design.

5. Operating Instructions

The machine features an intuitive display and controls for easy operation.

Figure 6: Display showing Voltage (V), Hertz (Hz), Time, Amount (AMT), and Quantity (QTN) with control buttons.

• Power On/Off: Press and hold the 'O' button for 3 seconds.
• Start/Pause: Quickly press the 'O' button.
• Adjust Voltage: Use the '+' and '-' buttons to adjust the voltage. Each press changes the voltage by 0.1V. Holding the button down adjusts by 0.5V. The voltage range is 1-12V.
• Working Hours: The display shows working hours accurate to minutes. The timer resets when the machine is powered off and pauses when the machine is paused.
• Billing: While paused, press '+' and '-' to adjust the billing value.
• J/S Startup Mode: Double-press the 'O' button to switch between startup modes:
  • J (Jump Start): Provides a 10V jump start.
  • S (Smooth Start): Provides a smooth, gradual start.

6. Maintenance

6.1 Charging the Battery

The machine is equipped with a 2400mAh battery, providing 5-6 hours of battery life and requiring approximately 3 hours for a full charge.

• Use the original Type-C charging cable.
• Connect to a 5V/2A charging adapter.
• Important: Do not completely drain the battery before charging, as this can damage the battery and shorten its lifespan.

6.2 Cleaning and Sterilization

Proper cleaning and sterilization are crucial for hygiene and the longevity of your machine.

• Always disconnect the machine from any power source before cleaning.
• Wipe down the exterior of the machine with a soft cloth dampened with an approved disinfectant solution.
• Do not immerse the machine in liquid.
• Ensure all parts are dry before storage or next use.

7. Troubleshooting

If you encounter issues with your Ambition Ninja Max 280P, refer to the following common troubleshooting steps:

• Machine not turning on: Ensure the battery is charged. Press and hold the 'O' button for 3 seconds to power on.
• Inconsistent power/stuttering: Check that the needle cartridge is securely attached. Ensure the battery has sufficient charge.
• Machine overheating: While the brushless motor is designed to prevent overheating, prolonged use at maximum settings in high ambient temperatures can still cause warmth. Allow the machine to cool down if it feels excessively hot.
• Display not working: Try restarting the machine by powering it off and on. If the issue persists, ensure the battery is charged.

For persistent issues not covered here, please contact customer support.

8. User Tips

Maximize your experience with the Ambition Ninja Max 280P:

• The Ambition Brushless motor excels in various tattooing styles, including lining, shading, color packing, lettering, traditional, and neotraditional. Experiment with different settings to find what works best for your technique.
• For optimal performance and battery longevity, avoid completely draining the battery before recharging.
• Utilize the 'J' (Jump Start) mode for starting with larger needle configurations or when a quick, powerful start is needed. Switch to 'S' (Smooth Start) for more delicate work or when a softer initial impact is preferred.
• The machine's solid and heavy feel is particularly beneficial for artists who appreciate stability and precise control during long tattooing sessions.

9. Warranty and Support

For any warranty claims, technical support, or service inquiries, please contact the Ambition Official Store directly through your purchase platform. Keep your proof of purchase for all service requests.

Security & Privacy: Your personal details are protected and not shared with third parties without your consent. Payments are secure, and your privacy is maintained.