Introduction
Thank you for choosing the AULA SC590 PRO Wireless Gaming Mouse. This manual provides detailed instructions on how to set up, operate, and maintain your mouse to ensure optimal performance. Please read this manual thoroughly before using the product.

Image: AULA SC590 PRO Wireless Gaming Mouse with key features.
Package Contents
Please check the package for the following items:
- AULA SC590 PRO Wireless Gaming Mouse
- USB-C Charging Cable
- USB Receiver (2.4G)
- User Manual

Image: Package contents of the AULA SC590 PRO.
Product Overview
Familiarize yourself with the buttons and features of your AULA SC590 PRO mouse.

Image: Multi-functional Buttons Layout.
Button Layout
- Left Button: Standard left-click function.
- Right Button: Standard right-click function.
- Middle Button (Scroll Wheel): Scroll up/down, middle-click function.
- Forward Button: Navigates forward in web browsers or applications.
- Backward Button: Navigates backward in web browsers or applications.
- On/Off (Lighting Mode) Switch: Located on the bottom of the mouse, controls power and lighting.
- Mode Switch/BT Pair Key: Located on the bottom of the mouse.
- Single Press: Switches between 2.4G, BLE1, BLE2 modes.
- Long Press (3 seconds): Activates Bluetooth pairing mode (tail decorative light flashes).
- Receiver Slot: Storage compartment for the USB 2.4G receiver, located on the bottom.
Display Screen (SC590 PRO only)
The LED display provides real-time information:
- Current Mode (2.4G, BT1, BT2, Wired)
- DPI Value
- Battery Level
- Charging Status

Image: Display Screen, Sensor, Micro Switches, and Polling Rate.
Setup Instructions
1. Charging the Mouse
Before first use, it is recommended to fully charge the mouse. If you experience pauses or sluggish cursor movement during use, it indicates that the lithium battery is low and needs charging.
- Connect the supplied USB-C charging cable to the mouse's charging port and to a USB power source (e.g., computer USB port).
- During charging, the charging indicator light on the display will be on.
- The indicator light will turn off once the mouse is fully charged.
Important Charging Safety Notes:
- Do not use high-power mobile fast chargers to charge the mouse, as this may damage the charging IC.
- It is recommended to use the supplied charging cable and a standard charger below 5A for charging.
- It is recommended to charge the mouse only via a computer USB port.
- Do not use inferior or non-standard power adapters.
- Do not use over-voltage or over-current power adapters.
- Keep the mouse away from high-temperature devices while charging.
- Turn off the power switch if the mouse is not used for a long period.

Image: 500mAh Rechargeable Battery.
2. Connecting the Mouse
The AULA SC590 PRO supports three connection modes: 2.4GHz Wireless, Bluetooth, and USB-C Wired.

Image: Multi-mode Connectivity and Compatibility.
2.1. 2.4GHz Wireless Connection
- Take out the USB receiver from the storage slot on the bottom of the mouse.
- Plug the USB receiver into an available USB port on your computer.
- Switch the mode switch on the bottom of the mouse to the 2.4G mode. The green light on the mouse will flash, indicating it's connecting.
- The connection will be established automatically. The device is pre-paired at the factory and can be used directly.
- Re-pairing (if needed): If the connection is lost, switch to 2.4G mode, then press and hold the Mode Switch/BT Pair Key for 3 seconds until the green light flashes rapidly. Pairing will succeed. (Pairing Distance: Within 10cm)
2.2. Bluetooth Connection (BLE1 / BLE2)
- Switch the mode switch on the bottom of the mouse to one of the Bluetooth modes (BLE1 or BLE2).
- Press and hold the Mode Switch/BT Pair Key (more than 3 seconds) to enter pairing mode. The tail decorative light will flash (pairing lasts for 3 minutes).
- On your computer (e.g., Windows 10), search for Bluetooth devices.
- Select "AULA-SC590" or "AULA-SC590Pro" (depending on your model) from the list of available devices to pair.
- Once paired, the Bluetooth icon on the mouse's display will stay lit for 2 seconds, indicating a successful connection.
- Bluetooth Fast Pair (Windows 10 RS4 or Build 1803 and above): When the mouse is in pairing mode and near the computer, a pairing window will automatically pop up on the desktop.
2.3. USB-C Wired Connection
- Connect the USB-C charging cable to the mouse's charging port.
- Connect the other end of the cable to an available USB port on your computer.
- The mouse will automatically switch to wired mode and function as a wired mouse.

Image: Mouse in Wired Mode.
Operating Instructions
DPI Adjustment
The AULA SC590 PRO features 6 adjustable DPI levels, up to 20,000 DPI (software required for full adjustment). You can cycle through preset DPI values using the dedicated DPI button, often integrated with the display screen controls.
- Preset DPI Levels: 1200 / 2400 / 3600 / 4800 / 9600 / 20000.
- The default DPI is 2400.
- The current DPI value will be shown on the mouse's display screen.

Image: 6-Level Adjustable DPI.
Polling Rate
The mouse supports multiple polling rates for different usage scenarios:
- Available Polling Rates: 125Hz / 250Hz / 500Hz / 1000Hz.
- The default polling rate is 1000Hz.
- Polling rate can be adjusted via the programmable software.
Programmable Software
Customize your AULA SC590 PRO mouse with dedicated software to enhance your gaming and productivity experience. The software allows you to:
- Create and assign Macros.
- Fine-tune DPI Speed settings beyond the preset levels.
- Adjust Polling Rate.
- Remap Button Settings for personalized control.
Please visit the official AULA website (www.aulastar.com or www.aulagaming.ru as per manual) to download the latest software for your mouse.

Image: Programmable Software Interface.
Sleep Mode
To conserve battery life, the mouse enters sleep mode after periods of inactivity:
- First-level Sleep Mode: After 1 minute of inactivity, the display will turn off, and the mouse enters a low-power state.
- Second-level Sleep Mode: After 10 minutes of inactivity, the mouse enters a deeper sleep mode.
- Waking the Mouse: Move the mouse or press any button to wake it up.
- Note for macOS: In macOS, when the computer is in sleep state, the mouse can only be woken up by movement after 1 minute. Before 1 minute, it can only be woken up by pressing a button.
Maintenance
Cleaning
- Use a soft, dry cloth to clean the surface of the mouse.
- For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
- Avoid using harsh chemicals or abrasive materials, as they may damage the mouse's finish.
- Ensure no liquid enters the mouse's internal components.
Battery Care
- Avoid fully discharging the battery frequently.
- If the mouse will not be used for an extended period, turn off the power switch.
- Store the mouse in a cool, dry place.
Troubleshooting
Mouse Not Responding / Disconnecting
- Check Battery: Ensure the mouse is sufficiently charged. Refer to the "Charging the Mouse" section.
- Check Connection Mode: Verify that the mouse is set to the correct connection mode (2.4G, BT1, BT2, or Wired) matching your computer's connection.
- 2.4G Wireless:
- Ensure the USB receiver is securely plugged into a working USB port.
- Try re-pairing the 2.4G connection as described in the "2.4GHz Wireless Connection" section.
- Try a different USB port.
- Bluetooth:
- Ensure Bluetooth is enabled on your computer.
- Try re-pairing the Bluetooth connection as described in the "Bluetooth Connection" section.
- Remove the mouse from your computer's Bluetooth device list and re-add it.
- Wired:
- Ensure the USB-C cable is securely connected to both the mouse and the computer.
- Try a different USB port or cable.
- Interference: Move the mouse closer to the receiver/computer, or away from other wireless devices that might cause interference.
Cursor Movement is Sluggish or Erratic
- Low Battery: Charge the mouse fully.
- DPI Setting: Adjust the DPI to a suitable level for your task.
- Surface: Ensure you are using the mouse on a clean, non-reflective surface. A mouse pad is recommended.
- Sensor Cleanliness: Check if the optical sensor on the bottom of the mouse is clean and free from obstructions.
DPI Adjustment Not Working
- Ensure the mouse is powered on and connected.
- Press the DPI adjustment button firmly. The display should show the changing DPI values.
- If using custom DPI settings, ensure the programmable software is installed and running correctly.
Specifications
| Feature | Detail |
|---|---|
| Model | AULA SC590 PRO |
| Dimensions | 118 × 60 × 38mm ±0.2mm |
| Weight | Approx. 64g |
| Connection Method | BT / 2.4G Wireless / USB-C Wired |
| Sensor | PAW3311 Optical Sensor |
| DPI Levels | 1200 / 2400 / 3600 / 4800 / 9600 / 20000 (Driver Required for Adjustment) |
| Polling Rate | 125Hz / 250Hz / 500Hz / 1000Hz (Default: 1000Hz) |
| Operating Frequency | 2402-2464MHz (2.4G), 2402-2480MHz (BLE) |
| Battery Capacity | 500mAh Rechargeable Lithium Battery |
| Charging Voltage/Current | DC5V - 250mA |
| Charging Port | USB-C |
| Display Screen | Yes (Shows Mode, DPI, Battery Level, Charging Status) |
| Number of Buttons | 6 keys |
| Backlight | RGB |
| Compatibility | Windows 2000/XP/7/8/10, macOS (Win 95/98 By Software) |

Image: Mouse Dimensions and Weight.
User Tips
- Optimize for Gaming: For competitive gaming, use the 2.4GHz wireless or wired connection for the lowest latency and set the polling rate to 1000Hz.
- Battery Management: Regularly check the battery level on the display screen to avoid interruptions during use. Turn off the mouse when not in use for extended periods.
- Customization: Explore the programmable software to create custom macros and button assignments that suit your workflow or gaming style.
- Ergonomics: Take breaks during long sessions and ensure your grip style (palm, finger, or claw) is comfortable to prevent strain.

Image: Ergonomic Design and Grip Styles.
Warranty and Support
For warranty information, technical support, or further inquiries, please refer to the official AULA website or contact your retailer. Keep your purchase receipt as proof of purchase.
Official Website: www.aulastar.com