Introduction
The AKKO X MonsGeek FUN68 HE is a 65% layout magnetic switch custom keyboard designed for esports gaming, featuring rapid trigger technology, 0.005mm accuracy, and an 8K polling rate. This manual provides essential information to help you get the most out of your keyboard.
Video: AKKO X MonsGeek FUN68 HE Magnetic Keyboard demonstration.
Image: Overview banner for the MonsGeek FUN68 HE Magnetic Switch Keyboard, highlighting its features.
Setup Guide
Package Contents
Your package should contain:
- MonsGeek FUN68 HE Magnetic Keyboard
- USB Type-C Cable
- User Manual (this document and a PDF version)
Connection
The FUN68 HE keyboard supports wired (USB Type-C) and wireless (2.4G and Bluetooth) connections.
Wired Connection
- Connect the provided USB Type-C cable to the keyboard's port.
- Connect the other end of the cable to an available USB port on your computer.
- The keyboard will be automatically recognized and ready for use.
Wireless Connection (2.4G Pairing)
- Power on the keyboard.
- Press
Fn + Yto enter 2.4G mode. - Short press
Fn + Yto switch between 2.4G connections. - Long press
Fn + Yfor 3 seconds to initiate 2.4G pairing. - Insert the 2.4G receiver into your computer. The keyboard should connect automatically.
Wireless Connection (Bluetooth Pairing)
- Power on the keyboard.
- Press
Fn + E,Fn + R, orFn + Tto enter Bluetooth mode (BT1, BT2, BT3 respectively). - Short press the corresponding
Fn + E/R/Tkey to switch between paired Bluetooth devices. - Long press the corresponding
Fn + E/R/Tkey for 3 seconds to initiate Bluetooth pairing. The indicator light will flash. - On your device (computer, laptop, tablet), search for Bluetooth devices and select "MonsGeek FUN68 HE" to connect.
Driver Installation
The MonsGeek FUN68 HE utilizes a web-based online driver for advanced customization. Access the driver via your web browser at web.monsgeek.com. This driver allows for endless remapping, backlight customization, and polling rate adjustments.
Image: Screenshot of the MonsGeek web-based driver interface, showing options for adjusting the keyboard polling rate.
Operating Instructions
Combination Keys (Fn Functions)
The keyboard features various functions accessible via the Fn key. Refer to the table below for common combinations:
Battery Level Check (Wireless Mode)
To check the battery level in wireless mode, press the Fn + Spacebar combination keys. The indicator lights (Number 1-9 keys) will show the battery status:
- Below 30%: Number 1-2 keys show red light.
- Below 40%: Number 1-3 keys show green light.
- Below 50%: Number 1-4 keys show green light.
- Below 60%: Number 1-5 keys show green light.
- Below 70%: Number 1-6 keys show green light.
- Below 80%: Number 1-7 keys show green light.
- Below 90%: Number 1-8 keys show green light.
- Below 100%: Number 1-9 keys show green light.
- Fully Charged: Number 1-0 key shows green light.
Advanced Magnetic Switch Features
The FUN68 HE keyboard offers several advanced features for competitive gaming:
- Cross-Compatibility with Mainstream Magnetic Switches: Support mixing and matching different magnetic switches in different keys simultaneously. After replacing switches, select the corresponding switch in the MonsGeek Driver and calibrate the keyboard.
- 0.005mm RT Accuracy: Achieve ultra-precise 0.005mm Rapid Trigger and adjustable actuation distance in 0.005mm steps. This allows fine-tuning for faster response times and enhanced precision.
- Universal 8K Polling Rate: Enjoy ultra-fast response times and smoother, more precise inputs with an 8000Hz polling rate for all keys in wired or 2.4G wireless modes.
- ARGB at a 500Hz Refresh Rate: Features addressable RGB with individually controlled LEDs for smooth, flicker-free lighting. With Alpha channel integration and a 500Hz refresh rate, it offers richer dynamic effects and reduces visual fatigue.
- RT Stabilizer: This mode helps prevent unintended inputs or disconnections from slight hand tremors, especially when using a Rapid Trigger precision of 0.005mm. It can be activated via the MonsGeek Driver with 4 different filtering levels.
- Demagnetized Stabilizer: The Stabilizer Wire is demagnetized to reduce magnetic interference, improve trigger accuracy, optimize feel, and enhance long-term stability.
- Snap Key: MonsGeek’s implementation of SOCD, prioritizing the most recent keypress for swift directional changes without releasing previous inputs. Ideal for FPS games.
- Adjustable Actuation Distance: Magnetic switches allow users to adjust each key’s actuation point from 0.1mm to 3.4mm, offering different pressing feels for gaming or typing.
- Rapid Trigger (RT): Dynamically changes the keys’ actuation and deactivation points. Through the MonsGeek Driver, users can choose “All Buttons” or “Per Button” customization modes, and activate “Non-stop Rapid Trigger” for near-instant key response.
- Dynamic Keystrokes (DKS): Pressing a key can trigger four different key operations based on keypress force (light press for action 1, deeper press for action 2). Releasing the key also supports a two-stage key setting.
- Toggle Key (TGL): Transforms a key into a toggle switch. Activate one of two scenarios: continuously hold down the key/function, or trigger it multiple times at high frequency.
- Mod-Tap: Enables the creation of dedicated or dual-functional keys based on key press behavior. A single keypress can achieve two functions: holding down the key for one function, and tapping it for another.
Image: Illustration of the keyboard's compatibility with different magnetic switches and the software interface for switch settings and calibration.
Image: A visual representation of the 0.005mm Rapid Trigger accuracy, showing precise actuation points.
Image: Graphic illustrating the 8K polling rate capability of the keyboard.
Image: Visual representation of the ARGB lighting with a 500Hz refresh rate.
Image: Diagram showing the RT Stabilizer feature, indicating enhanced stability.
Image: Illustration of a demagnetized stabilizer, with a crossed-out magnet symbol indicating reduced magnetic interference.
Image: Diagram illustrating how Snap Key works, showing input prioritization for quick directional changes.
Image: Diagram showing the adjustable actuation distance feature, with sliders for press down and lift up points.
Image: Diagram comparing regular keyboard actuation with Akko Rapid Trigger, showing faster reset and actuation.
Image: Diagram illustrating Dynamic Keystrokes, showing how different press depths trigger different actions.
Image: Diagram illustrating Toggle Key functionality, showing how a single key can act as a toggle for continuous or repeated actions.
Image: Diagram illustrating Mod-Tap, showing how a key can have different functions based on whether it's pressed and held or tapped.
Maintenance
Cleaning Your Keyboard
- Disconnect the keyboard from your computer before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and case.
- For deeper cleaning, you may use a can of compressed air to remove dust and debris from between the keys.
- Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the keyboard's finish or components.
Switch Replacement
The FUN68 HE supports cross-compatibility with various magnetic switches. If you choose to replace switches:
- Carefully remove the keycap using a keycap puller.
- Gently pull out the magnetic switch.
- Insert the new magnetic switch, ensuring it is properly aligned.
- After replacing switches, connect to the MonsGeek Driver and select the corresponding switch type for calibration to ensure optimal performance.
Troubleshooting
Common Issues and Solutions
- Keyboard not responding:
- Ensure the USB cable is securely connected or that the wireless connection (2.4G/Bluetooth) is properly paired.
- Check the battery level if using wireless mode.
- Try connecting to a different USB port or device.
- Keys not registering or double-typing:
- This can occur with magnetic switches if not properly calibrated. Use the MonsGeek Driver to recalibrate the switches.
- Ensure no debris is obstructing the switch mechanism.
- Backlight not working or incorrect:
- Check backlight settings using the Fn key combinations or the MonsGeek Driver.
- Ensure the keyboard is receiving sufficient power (especially in wired mode).
- Wireless connection issues:
- Ensure the keyboard is in the correct mode (2.4G or Bluetooth).
- Re-pair the device following the setup instructions.
- Reduce interference by moving closer to the receiver/device or removing obstacles.
Specifications
Magnetic Switch Specifications
Akko Flash Magnetic Switch
- Total Travel: 3.5±0.1mm
- Initial Force: 25gf Min
- Actuation force at 2.0mm Travel: 40±5gf
- End Force: 48gf Max
- Initial Magnetic Flux: 90+15GS (PCB: 1.6mm)
- Bottom Magnetic Flux: 580+50GS (PCB: 1.6mm)
- Top/Stem/Bottom: PC/POM/PA66
- LED Diffuser
Akko Glare Magnetic Switch
- Total Travel: 3.4mm
- Initial Force: 25gf Min
- Actuation force at 2.0mm Travel: 40±5gf
- End Force: 48gf Max
- Initial Magnetic Flux: 95+15GS (PCB: 1.6mm)
- Bottom Magnetic Flux: 589+50GS (PCB: 1.6mm)
- Top/Stem/Bottom: PC/POM/PC
- LED Diffuser
Image: Detailed view of Akko Flash and Glare Magnetic Switches.
User Tips
- The Rapid Trigger (RT) and actuation are highly precise and responsive, making it excellent for competitive gaming.
- The keyboard's compact 65% layout is a great balance between functionality and desk space.
- Experiment with the web-based MonsGeek Driver to customize key remapping, backlight effects, and polling rate for a personalized experience.
- If you're new to magnetic keyboards, take some time to adjust to the different feel compared to traditional mechanical keyboards.
- The lubed switches provide a comfortable and satisfying typing experience right out of the box.
Warranty and Support
Warranty Information
MONSGEEK provides a one-year warranty for customers in mainland China. For other regions, please contact your seller (MONSGEEK distributor) to understand the specific warranty policy applicable to your purchase.
If the warranty period expires, repair costs will be borne by the customer. If you prefer to repair the keyboard yourself, MONSGEEK can provide instructions, but you assume full responsibility for any damage incurred during self-repair.
Disassembling the keyboard without instructions from the manufacturer/seller will immediately void the warranty.
Official after-sales service hours are Monday to Friday, 10:00 AM to 6:00 PM, excluding national holidays.
Return and warranty policies may vary across different platforms and depend on the specific dealer at the time of purchase.
Contact Support
For support and inquiries, you can contact Shenzhen Yinchen Technology Co., Ltd:
- Phone: 0769-22114578
- Website: www.monsgeek.com
- Address: Tower B, 35th Floor, Evergrande, Jiannan Road, Nanshan District, Shenzhen
For more detailed information, please refer to the official user manual PDF, which can be referenced at this link.